Firesight licenses

Similar Questions

• Host Firesight license limit

  Hello world

  I see this alert in the center of the defense healthcare

  Module FireSIGHT host license limit: you have 0 off FireSIGHT 2000 remaining licenses of the host
  Monitor module license: DC750: number of HOST used exceeds total by 9 licenses.

  Host here means number of PC?

  Concerning

  Mahesh

  This means that the number of addresses to end host seen by your FireSIGHT Management Center. This can include PCs and any other IP address whose traffic has been observed through the CMF.

• ASA concern Firepower License Code...

  Dear all,

  I'm new to the fire of the SAA. If need help with licensing related question. Please check the attachment file.  I already add Firesight license ASA 5512 IP & URL filtering to the Frisight server. But device (power of fire ASA 5512) can not associated with these permits

  You need the license control basis (free of charge) on the SAA until you can add (IPS) protection, URL filtering, or the license of Malware (AMP) to it.

• FireSight/SourceFire IPS licenses

  With my package, I received two orders + protect licenses. They have no expiration in the licenses of the UI part and were a SKU to $0 on the command. I bought only the subscription, no IPS or malicious URL filtering software. However when I create and implement strategies of intrusion in FireSight UI does not complain.

  Is the component functional IPS based on control + protect the licenses that I received?

  Control / Protect licenses should be attributed to modules to ensure all features of the any other feature licenses.

  It is true that they are not necessarily error when you did not. but features can fail in more subtle ways depending on how your policies are made.

• License FireSIGHT - ASA IPS

  Hello

  I currently installs a virtual appliance of FireSIGHT to manage installed with fire services ASA 2.

  My Defense Center is an appropriate license, using the key PAK I got.

  I bought 2 IPS for two of the ASA subscription licenses.

  I have configured the Manager on both devices of sourcefire and added to the centre of defence.

  Now, my problem is: I can't attribute any IPS policy because there seems to be no licenses installed on the domain controller to be applied to devices...

  My question is: what I have to buy additional licenses for the domain controller for the IPS features (Protection) or do I missed something here? :-)

  Thank you very much

  Kind regards

  Hello

  As Marvin commented, you will have a license CTRL "ASA5525-CTRL-ICA" accompanying the device through a certificate of claim. On the certificate, you should see a number PAK and steps to save to get the license. Please follow these.

  If you have purchased a = L - ASA5525 - TA - LIC, then that gives you the right to obtain updates to signature for CONTROL-PROTECT features. There is no PAK or license for this PID.

  -DD

• Cannot select on FireSight URL filtering with license activated

  Hi community

  I have a FireSight 6.0 VM with 4 modules of firepower enabled from four 5506-X ASA devices.

  They are all updated to 6.0 the power of fire and FireSight, I have an activated license:

  

  Under management of devices for fire power I can't even select URL filtering:

  

  What should do?

  The permanent control (CTRL) license free of charge is a sine qua non for all licenses of the term-based subscription. The PAK, it should have been included with the ASA.

  If this is not your partner (or TAC) can call the sales order and you can then redeem it for a license.

• FireSIGHT Eval License Management Center

  Y at - it licensed Eval of 60 days for the FireSIGHT Management Center? If so someone has the link to it so I can get one for my client? Thank you.

  If you are a partner, you can follow evidence security of value (POV) available on the security clearance process partner community.

  See the next page of the procedure:

  https://communities.Cisco.com/docs/doc-55301

  (Not a public or oriented customers link - access level partner required)

• FireSight limited license affect host

  After a week or so of firepower in serivce I get a notification indicating that the host license limit has been reached (50 k) right now, the action is configured to replace the former hosts. My internal network is not 150 + peripheral physical so I'm under the assumption of this limitation is reached at reason traffic/external hosts. For now I have disabled the specific trigger in health policy to clarify the notifications. Looking for suggestions on how to mitigate this in the future.

  Take a look at the discovery policy, perhaps you need to refine the networks and zones

• 0 of 50000 FireSIGHT host remaining licenses

  This means that you have not discovered active user.

  Come on the discovery network/policies.

  If you have a defined "local" network and clock on the "pencil" or double click.  Next to 'The Action' at the top, click on "users".  Save and deploy.

  If you do not have a 'local' defined network, add a network as 'IPV4-private-All-RFC1918' and then repeat the steps above.

  This means that you have not discovered active user.

  Come on the discovery network/policies.

  If you have a defined "local" network and clock on the "pencil" or double click.  Next to 'The Action' at the top, click on "users".  Save and deploy.

  If you do not have a 'local' defined network, add a network as 'IPV4-private-All-RFC1918' and then repeat the steps above.

• ASA 5506 and control license included

  Hello! I have searched, but have not yet found a solid answer on this. We received an ASA5506-X, which has a license of control included.

  From what I see, to get all the benefits of the control license, I will also need a license of protection (as described here:http://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-mo...)

  Is this correct? Is license included control essentially pointless until we get a license protection, or we would gain any advantage by applying?

  Thanks for the help!

  Self-control offers very limited functionality. See the following Cisco description:.

  Function application visibility and control (AVC) by default. This function allows the application identification and control more of 3,000 applications, detected and classified by risk and business relevance.

  To perform most interesting actions based on policies, you need one of the extra cost of licenses like IPS, filtering URL or Advanced Malware Protection (AMP).

• Capabilities with the right Protection and control of license

  Hi people,

  Just check that I understand the limits of a capabilities of clients with the power of fire with only the Protection/control.

  They will be

  1 / receive updates of poorly known ip addresses

  2 / receive updates for pre-treatment Snort rules - VDB files

  3 / be able to create manual URLS to perform a kind of Url rules in function

  4 / geolocation?

  They will not

  1 / have any possibility to send / receive file layout information

  2 / have any possibility to use Url categories

  3 / are free to set up rules to file based Malware

  Hi Evan,

  With a minimum of Protection and control, you can start the management of firepower. If the customer requires awareness of users according to a user with the license agent host Firesight will do as well as the Protection and control. You can create reports user based with the latter.

  Here's the URL and ports must be opened for the Firesight get necessary updates.

  SRU/VDB/Patch/all updates
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Here is the detailed information of the download server:

  Domain: support.sourcefire.com
  URL: https://support.sourcefire.com
  Port: 443/tcp (bidirectional)
  IP address: 50.19.123.95, 50.16.210.129

  Additional IP addresses that are also used by the support.sourcefire.com (in the method of Robin) are:

  54.221.210.248
  54.221.211.1
  54.221.212.60
  54.221.212.170
  54.221.212.241
  54.221.213.96
  54.221.213.209
  54.221.214.25
  54.221.214.81

  For amp
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...
  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/sourcefire-amp-applia...
  Using port 443 (bidirectional)
  Or Legacy port 32137 (out)

  For the URL filtering
  Access to the 'database.brightcloud.com' and 'service2.brightcloud.com '.
  the IP address is dynamic
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Using port 443 (bidirectional)
  Using port 80 (incoming)

  For downloads of feed security intelligence:
  Access to intelligence.sourcefire.com
  The server uses the round robin scheme of IP address for the NLB, availability and fault tolerance. Therefore, IP addresses can change, and it is recommended that the firewall is configured with CNAME instead of an IP address.

  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Using port 443 (bidirectional)
  Using port 80 (incoming)

  Kindly correct brand and rate if this helps.

  Concerning

  Jetsy

• Protect and control the license for ASA with the power of fire

  I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.

  How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses

  Thank you

  Hello

  L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".

  Please discuss a case with CISCO GLO, they can help provide a CTRL license

  -DD

• Cisco Firesight "No any Data.

  Dear experts,

  I'm quite new with the firepower of Cisco. I have 2 ASA5555 Cisco with firepower and deploy as a active / standby. We have three zone inside and OUTSIDE management. Firesight server is the stay in the planning area. I registered all module Cisco firepower at the center of Firesight project and I manage traffic inspection by fire on cisco ASA power module already. I applied the rule by default IPS for the registered device. I kept it for 2 days after that I do not throw an eye on cisco FireSight there is no any information. He showed 'No Data'. I wonder that I may miss configuration. I try to re - register the devices but it still the same. Please see the diagram below for more details.

  I would like to have support for this issue. If you have any questions please let me know

  -INTERIOR interface: ip add 192.168.100.x/24

  -Outside interface: ip add x.x.x.x/24

  -Management interface: ip 10.100.100.x/24

  -Add FireSight server ip: 10.100.100.x/24

  Drawing1.jpg

  

  Hello putmanoait,

  Since this is a new installation, try installing the latest code to use all the new features with the device. After a correct installation and having all the required license, including Firesight host license you must ensure that the traffic was correctly redirected to cross the Firepower.If of firepower redirects the traffic that you see the same thing by activating logging under the strategy of policy access control > Access Control > rules > Logging > logging at the beginning of the connection or the logging at the end of the connection. Once after you have enabled logging, save and reapply or redeploy policy changes. Each device has its own database connection parameters. You can check out the following link and see how many events can be stored in the device.

  http://www.Cisco.com/c/en/us/TD/docs/security/firesight/541/user-guide/F...

  If you can see the respective connection events under analysis > connection events, the dashboard data must also complete. If you have already activated the above and still no events are coming so please proceed as follows by the connection to Firesight CLI by raising for the root user.

  (1) check that the following service is running

  pmtool status | grep SFTop10Cacher

  (2) restart the service

  pmtool restartbyid SFTop10Cacher

  (3) you should see the service as running with a different pid

  pmtool status | grep SFTop10Cacher

  Check the scoreboard after 30 minutes.

  Rate and mark correct if the post will help you.

  Concerning

  Jetsy

• ASA with firepower and Licensing Service

  Hello

  If I buy an ASA with the power of Fire Service (e.g. 5516-X) should which licenses I buy?

  I understand that I need to order a license for the Service of firepower. E.g. IPS, URLS, and AMP.

  Should I order a license management FireSIGHT, too? The centre of mandatory FireSIGHT management? This license is necessary?

  Concerning

  You will need the license of control (CTRL). It is free and automatically included with any package of power of fire SKU (i.e. ASA5516-FPWR-K9).

  Then you must add the IPS, URLS or AMP (or combination of both) services in term 1, 3 or 5 years.

  FireSIGHT Management Center is not required for entry-level (5506, 5508 or 5516) models. It is optional on those you can use the entry firesight level integrated in ASDM for the model.

  For all other models, it is necessary. If you manage more than a simple ASA (even an HA pair) it is recommended even for the entry level models that you will be so power sync policies through them all.

• device without a permit in firesight

  Hi all.

  I have a deployed Firesight management VM. I have installation ASA 5515 X 2 with it successfully. When I went to add another today, I applied my licenses in the license tab and when I go to them to join the new ASA, the boxes are grayed out and it remains unlicensed. How can I do to solve this?

  1.PNG

  

  2 png

  

  3 png

  

  You cannot add a second license 2-unit to a management center of FireSIGHT 2 - existing device. Licenses are not additive.

  It must be replaced by a 10-device license add additional devices. (or deployed as a separate VM management)