Initialization of a wireless automatically before windows logon?

Similar Questions

• Get a black screen BIOS afer and before Windows logon

  So get a black screen after BIOS and before the Windows logon screen. I checked the RAM and one on two RAM sticks that was bad. But I still have the black screen. I tried an external monitor but still a black screen. I tried all the normal things (verification of the restore point disc, e.g. via the command prompt, startup repair, etc.) and no luck. I ran a test to check the hard drive, and it is impossible to find the hard drive. But then I ran AVG anti-virus, the AVG Live (bootable CD) and at the very start gave me this error: 106 error to the power of disk on life: 8768 (365 days + 8 hours) and underneath were basically the same error, just different numbers. But it still allowed me to run a scan and he was going through the files ok so she did not see the hard drive and files (contrary to the test of hard drive and yes the hard drive test was a bootable cd of same manf. like the hard drive), he found no virus. Even when I ran Defender in offline mode. Then I tried to re - install the operating system on the same drive with a cd. When he was going through the first part of the establishment where it was drivers and so forth: I kept getting the BSOD. Then I took the drive from the laptop and install it in another laptop but she has done the same thing, black screen, so I thought it was the hard drive. But then I begin another hard drive from the laptop and put it in the laptop original and he gave me the black screen and I know that the hard drive was good, she was an operating system that starts when I put it in the not troubled laptop. So any ideas anyone? Would it be possible that the all three things at once: RAM and hard drive laptop motherboard? Any help would be appreciated. Yet once, bios starts, just to Gets a black screen and does nothing after the bios but before the windows logon. The operating system is Vista and it is a Dell laptop, Studio. Any ideas?

  Thank you

  Don

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you do not get black screen.
  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
   
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
   
  . Did you of recent changes made to your computer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  Follow the steps in the link below.
   
  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
  
  Method 2:
   
  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly:
  http://support.Microsoft.com/kb/958233
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
   
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
   
   
  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Wrong with EAP - TLS with Wireless before Windows logon

  Evil begins with a list of equipment;

  5508 WLC

  3502i AP

  Cisco ACS 5.3

  Clients Windows 7

  WLAN is set up with WPA2 AES with 802. 1 x for key management.

  Customer is set up with WPA2/AES, authentication method is Microsoft: card chip or other certificate on the computer. Authentication mode authentication is the user or computer.  The client is configured to use a certificate on the computer.  "It only works if the authenticating user or computer is seected."  If I use computer authenticate option... it says that it cannot find a certificate to use for the EAP.

  ACS is configured to allow only for the EAP - TLS protocol.

  We have created a stand-alone CA server and distributed CA certificates root and client authentication for all test systems.

  This whole process with EAP - TLS works very well if you are already connected to the machine, with the credentials of the cache.  Once I disconnect the Windows 7 client, I lose the connection to the WLAN.  We want to stay connected to the WIFI network.  W PEAP / MSCHAPV2 works very well with stay connected to the WLAN, but we want to use EAP - TLS.

  Any ideas?

  Thanks in advance,

  Ryan

  Hi Ryan,

  You actually answer your own question :) The reason for the fault is because the computer account doesn't have a certificate, so when your computer account user cannot connect to maintain the session going, and so you are disconnected. Provide the computer with a certificate account and your problem will be solved.

  Richard

• No response from the keyboard and mouse to the Windows logon.

  Hello, I had this problem a while but a restore fixed it, and of course it happened recently that I want to challenge results.
  Basically, my mouse and my keyboard do not respond before Windows logon.
  Opening height of session does not either.
  The keyboard and mouse seem to work if I go into the conservation program (ESC key at startup and F11).

  I'm running Windows 7 on an HPG60 laptop 64-bit with 3 GB of RAM.
  Processor: Intel (r) Celeron (r) CPU
  900 to 2.20 GHz 2.19 Ghz

  My mouse is actually a touchpad - Synaptics PS/2 Port TouchPad.
  My keyboard is attached to laptop Standard 101/102 - key or Microsoft Natural Keyboard PS/2 with HP QLB.
      
  I need help as SOON as possible so that I can get back to work.

  -Albert

  This is equivalent to the old rule of iron of computing: If you have important files on your PC, then you need to back up an external medium regularly. Problem request not do or wait until you have a major problem. Fortunately, Windows 7 gives you a loop hole. Here's how it works:
  1. get a disk external 2.5 "in a USB case.
  2. connect it to the PC.
  3. set your BIOS so that it uses the DVD drive as its primary boot device.
  4. start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
  5. press a button if you are prompted to start from the DVD.
  6. When prompted, select "Safe Mode Command Prompt".
  7. connect as administrator if you are prompted.
  8. Select repair when prompted.
  9. Select command prompt.
  10. save your files or folders on the external USB drive (or a flash drive).
  If you are not familiar with the commands of copy in the command line environment, ask a friend gifted in computer science to help you.

  After solving the problem of keyboard and mouse, do you a favor and use the USB disk as backup media. On a regular basis.

• Is there a way to authenticate a wireless connection in Windows 7 without defining the wireless to connect automatically and then restart?

  Windows 7 machines tell unauthenticated when connected wireless to our domain. The unauthenticated message disappears if we connect automatically to wireless connection and restart. Is there a way to authenticate without a connection to the wireless automatically and restart? For example, I would like to connect manually to the wireless, whenever I want and as soon as I do that authenticates.

  I use a router configured medialink wireless more as a wireless switch. DHCP comes from our server. Security is WPA-Personal. I also tried to use a different wireless router configuration with a radius with PEAP server and that does not work either. The server radius authenticated the user, but the message on the computer remained the same: "domain.local 2 unauthenticated.

  Each way in which users are able to access the resources, but this message is driving me crazy. We do not get this message on all XP machines.

  Client side, I tried to turn on the discovery of the network, joined the field, turn off any firewall (only using windows), updated drivers NETWORK card, update the firmware on the router, etc..

  Am I missing something?

  Thank you!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Spectrum HP convertible x 360: keyboard does not not on windows logon

  Hello people...

  I just bought a convertible of spectrum HP X 360 nine (13-inch, i7 - product number: N5R93UA #ABA) and its keyboard is not be enabled automatically on the Windows login screen. If, however, I it switch manually in tablet mode and then put it into laptop mode it starts to work, gives me the impression that it is a driver related issue. I already deleted all the drivers of three keyboard, rebooted the PC, noticed that the pilots were reinstalled automatically, however, the problem was NOT resolved.

  As long as additional information, I noticed that the keyboard meets the boot selection screen (before Windows starts). It works very well on the BIOS utility - which reinforces that the question should be tied to Windows or the keyboard driver.

  Other than retoring Windows ideas would be useful. In fact, the problem exists since the first logon windows.

  Unfortunately, that seems to be the solution to the problem

  http://h30434.www3.HP.com/T5/notebook-hardware/spectre-x360-keyboard-off-in-laptop-mode-on-in-tablet-mode/m-p/5093471#M184710

• automatic update Windows defender

  Windows Update is in my case to "check and inform", because I usually take a backup of the system disk before applying updates.
  However, the windows defender updates happen every day, and I believe that they cannot break my computer.
  I really wish Microsoft to separate the two updates: enabling windows Defender Update automatically, all while my preference of "check and inform" as regards to windows update in general.
  Why should he go through the update of windows defender windows? Cannot make its own updates like any other antivirus on the market?

  Hi harrymc,.

  Thanks for posting your request on the Microsoft Answers site.

  Windows and the programs that ship with Windows, such as Internet Explorer and Windows Defender can be updated automatically by turning on automatic updating.  You can configure Windows to automatically install important updates and recommended updates. Optional updates are not downloaded or installed automatically. With the parameters value updates Windows Update to update, but let me choose whether to download and install, you can set Windows Defender to check the new definitions before a Windows Defender analyzes programmed.

  To automatically check new definitions before Windows Defender at the request of scans (recommended)

  1. Click to open Windows Defender in Control Panel > Windows Defender

  2. click on tools and then click Options.

  3. under automatic scanning, make sure the automatically scan my computer (recommended) check box is enabled.

  4 check for updated definitions before scanning them to check, and then click Save. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To manually check the new definitions for Windows Defender:

  1. Click here to open Windows Defender.

  2. click on the arrow next to the help button and then click Find updates.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For reference, you can also check the following links for more information. Windows Defender and Windows Update settings.

  http://www.Microsoft.com/Windows/Windows-Vista/features/Defender.aspx

  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  Please let us know if we can provide any additional information or assistance.

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Is there a way I can welcome screen, windows logon password?

  Is there a way I can welcome screen, windows logon password? I just want my computer to boot and in windows without the logon screen?

  Thanks for your help, I would be without a computer if I don't hadn't found you.

  Extract from http://support.microsoft.com/kb/315231...

  You can also turn on automatic logon without editing the registry in Windows XP Home Edition and Windows XP Professional on a computer that is not joined to a domain. To do this, follow these steps:

  1. Click Startand then click run.
  2. In the Open box, type control userpasswords2, and then click OK.

     Note When users try to view help in the window information user accounts on Windows XP Home Edition, the help information is not displayed. Additionally, users receive the following error message:

     Cannot find the: \Windows\System32\users.hlp Help file. Check that the file exists on your hard drive. If it does not exist, you must reinstall it.
  3. Clear the "users must enter a user name and password to use this computer" option, and then click apply.
  4. In the automatically on log window, type the password in the password box, and then retype the password in the Confirm password box.
  5. Click OK to close the window automatically on Journal , and then click OK to close the user accounts window.

  Tricky

• Can not turn on my computer... "the windows logon system process unexpectedly... system shutdown.

  When I turn on my computer, a blue screen appears and it says: 'the windows logon system process done unexpectedly...... closed system '. "what this means?

  I forgot to answer one question:

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The most likely problem is that this file is missing:

  c:\windows\system32\winlogon.exe

  It might have been put in quarantine (actually deleted) by your antimalware/antivirus program, if you need to replace it.  There are other copies of the file on your system, which you can use to replace the missing file.

  You have to boot your system on something to do that, so if you have no real XP bootable installation CD, make a CD bootable XP (no XP media required) Recovery Console.

  Sometimes there is a problem to get into XP with XP Home Recovery Console, but work on this first, then we will see the replacement of the file:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  When own running chkdsk/r, we can replace the file.

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  Pls teach the procedure for resolution of the problems of this error message.

  Hi mac62sg,

  Remember to make changes to the computer before this problem?

  You can follow the steps mentioned in the article below

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Norton Internet Security 2010 automatically close Windows Defender? __

  My set up:

  Windows Vista 32 bit Home Premium, Vista SP2

  HP Desktop

  Modem DSL Connection

  Norton Internet Security 2010

  I just installed Norton Internet Security 2010. I get a pop up notice of Windows indicating that Windows Defender is disabled. When I had Norton Antivirus/spyware 2008 (that I used until the installation of Norton Internet Security 2010) Windows defender was on, but not in real time.  Then, when I'd go to

  The Task Manager > click on the Services tab > click on the Services button in the lower right

  This will display a list of Services. I scroll down and find the Windows Defender Service

  It shows NOT on and manual start

  Before the instalation of Norton Internet Security 2010, it has shown as Started and startup type automatic

  Is this the right setting with Norton Internet Security installed? I do not use Windows Defender, but I read that the Windows Defender Service is responsible for other things in addition to anti-spyware scanning.

  So should I change the startup type?

  and start the service?

  Or, as I said if I don't use it. leave it alone?

  Q. "Norton Internet Security 2010 automatically closes Windows Defender?"

  A. Yes.  It uses its own antispyware software.  Having two different types will result in conflicts and compatibility issues.

  Carey Frisch

• Windows logon: LogonUI.exe - corrupted file

  After the round of my boyfriend used CCleaner on my windows 7, whenever I'm starting, I get a box labelled windows logon: file logonui.exe - corrupted with the message the file or directory \Program files is damaged and unreadable. Please run the Chkdsk utility. A screen similar to the cmd prompt flashes whenever I try to access the chkdsk utility, so I'm not able to use it. I tried sfc scannow but I get a message indicating that Windows Resource Protection could not perform the requested operation. I did a clean boot and that did not help. System Restore no longer works. Also whenever I try to access the internet explore or trendmicro antivirus, I get a message saying the element 'iexplore.exe' or 'uiwinmgr.exe' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly. You really want to remove this shortcut? I don't know if these problems are interconnected and the result of something has been deleted by the ccleaner. I've read other questions similar to mine, but none have the solution I need. Anyone know how to solve these problems?

  Hi Malomi,

  Welcome to the Microsoft community.

  This problem occurs because of the corruption of the registry. I suggest you to do the Startup Repair and see if the problem is resolved.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer by using the power button on the computer.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. in the Advanced Boot Options screen, use the arrow keys to select repair your computer and press ENTER. (If your computer is not listed as an option, then your computer doesn't understand no repair preinstalled recovery options, or your network administrator has disabled the.)

  4. Select a keyboard layout, and then click Next.

  5. in the System Recovery Options menu, click a tool to open it.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope this information helps. We know the results. We will be happy to help you further.

• Page Web for TomTom starts automatically when windows start.

  When I start my computer the webpage for Tom Tom charge automatically and a pop-up box shows asking me to connect my Tom Tom GPS.  After I close the web page and the pop up my computer works normally.  This problem is very annoying because it really slows down to the top of my boot time.  I use the original version of the 64-bit Windows 7.  Any ideas?

  
  OT: Network programs network networking Internet site Internet Site Web URL of the Web Site
  Thank you
  John

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  Method 1
  I suggest you try the steps suggested by kathleencollins dated on June 20, 2012 from the following link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-can-i-prevent-my-TomTom-navigation-screen-from/5f478553-fd79-4FE3-9785-d1f80cb3b3e7

  Method 2
  I suggest you try the steps from the following link:

  Run a program automatically when Windows starts
  http://Windows.Microsoft.com/en-us/Windows7/run-a-program-automatically-when-Windows-starts

  Method 3
  I suggest you try the steps from the following link:

  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Note: When you perform an anti-virus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry