Get a black screen BIOS afer and before Windows logon
So get a black screen after BIOS and before the Windows logon screen. I checked the RAM and one on two RAM sticks that was bad. But I still have the black screen. I tried an external monitor but still a black screen. I tried all the normal things (verification of the restore point disc, e.g. via the command prompt, startup repair, etc.) and no luck. I ran a test to check the hard drive, and it is impossible to find the hard drive. But then I ran AVG anti-virus, the AVG Live (bootable CD) and at the very start gave me this error: 106 error to the power of disk on life: 8768 (365 days + 8 hours) and underneath were basically the same error, just different numbers. But it still allowed me to run a scan and he was going through the files ok so she did not see the hard drive and files (contrary to the test of hard drive and yes the hard drive test was a bootable cd of same manf. like the hard drive), he found no virus. Even when I ran Defender in offline mode. Then I tried to re - install the operating system on the same drive with a cd. When he was going through the first part of the establishment where it was drivers and so forth: I kept getting the BSOD. Then I took the drive from the laptop and install it in another laptop but she has done the same thing, black screen, so I thought it was the hard drive. But then I begin another hard drive from the laptop and put it in the laptop original and he gave me the black screen and I know that the hard drive was good, she was an operating system that starts when I put it in the not troubled laptop. So any ideas anyone? Would it be possible that the all three things at once: RAM and hard drive laptop motherboard? Any help would be appreciated. Yet once, bios starts, just to Gets a black screen and does nothing after the bios but before the windows logon. The operating system is Vista and it is a Dell laptop, Studio. Any ideas?
Thank you
Don
Hello
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
Method 2:
http://support.Microsoft.com/kb/958233
Tags: Windows
Similar Questions
-
Get a black screen during the Installation of Windows 8
Original title: BLACK SCREEN
OK, I tried 5 times to install windows 8 by using the downloaded Update widows Pro
I've updated the BIOS and other drivers and the only issue is to use the upgrade wizard is UEFI is not compatiable that shouldn't be a problem anywaySo here's the BLACK SCREEN problem, I get all along to install past loan, after adjustment of the apparatus, after preparation, all the way to the end and then it gives just black screen until I power it turns off or reset and says windows 8 could not restore windows I get no error code or any hint of why there not everyone had an idea Yes stay with windows 7 is an excellent option, but I would try and brand and make informed decisions.I have internet search and it seems to be a common problem for many different reasons - ideas - Ive tried more things ive read without success. Help pleaseHello Kiwivic,
Thank you for the question!
I'm sorry to know that have problems you with the Installation of Windows 8. As I understand it, you get a black screen during the Installation of Windows 8.
I need to ask you some questions to help you best.
1. What is the brand and model of the computer?
2 are the external devices connected to the computer?
Method 1: disconnect any external devices (except keyboard and mouse) and then install Windows 8 and check.
Method 2: Select the edge device devices in device/integrated graphic of BIOS (Basic Input output device) and check.
Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.
Reference link provided below for more information:
BIOS: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions
Meet us if you encounter any problems with the black screen or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
Hello
When I open firefox (Note: I have firefox version 28.0 and security Karspersky 2014) I get a black screen covering the firefox window around and it looks more lika a large window in firefox. What is it?
Concerning
Jean
Huh, that's news...
You can try Firefox in Safe Mode to see if the problem goes away. I think that it is an extension.
- Run firefox.exe - safe-mode in the search bar in the Start Menu. (Make sure Firefox is closed)
Have you added new extensions recently around the time this started happening? The details of your system displays the following:
- Adobe Acrobat - create PDF 1.2 ([email protected])
- Anti-banner 14.0.0.4917 ([email protected])
- Dangerous sites 14.0.0.4917 blocker ([email protected])
- Kaspersky URL Advisor 14.0.0.4917 ([email protected])
- Troubleshooting 1. 1a ([email protected]) it comes by default, so this isn't the problem.
- Virtual keyboard 14.0.0.4917 ([email protected])
-
My Acer Aspire 571 e5 allows me to connect, but then I get a black screen and I see my cursor
Hello
So my Acer Aspire 571 e5 which ive been using for about 3 days just had a windows update. Now, it starts well but I get a black screen when I connect. However, some programs are always able to see and popup randomly. I also tried to go into my bIOS, but it asks for a password that I don't know.
If you press CTRL + ALT + DELETE you are able to open the Task Manager?
or try this:
(1) once you are on the screen of login password, press on and hold down the SHIFT key and click on the power icon (lower right corner of the screen) and restart your computer... (Remember do not type a password)
(2) you will get advance options. Click on troubleshoot---> advanced---> start---> restart settings---> and select SAFE MODE WITH NETWORKING(3) once in office in safe mode, open Device Manager, click on the video card, right-click on it and choose unisntall
(4) restart and check if it works
-
Computer will not start with Windows. I get a black screen and a blinking cursor.
Windows XP Home Edition startup problem
I have Windows XP Home Edition, but the computer does not start at the top. I get a black screen and a blinking cursor. I have an XP installation disc. I was in the Recovery Console to recover all of the standard tasks, but nothing helped.Brand, model and model number of your PC?
Are you able to get into the BIOS?What took place prior to this problem?For now, you can read this to get some ideas: -
Basically what the title says, "computer starts up, but before the office is up I get a black screen for 5-15 minutes long."
I don't know the problem, looking it up and this is an annoying problem.
Hi InterestedLearner,-Have you done recent changes made to your computer before this problem occurred?Updated the graphics driver and check if it helps fix the problem.Visit the manufacturer's Web site to do the same.Take a look at these items as well for more information on updating a driver:Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyUpdate drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links -
Netflix in media center do not download movies and just get a black screen
Hello world
I can open windows media center, but when I try to watch a movie instantly it not to download the movie and just get a black screen. Sometimes Media Center stops as well.
If someone here can help would be great!
Uninstall and reinstall Silverlight.Make that you have the latest version of Silverlight installed on your system.
http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx
-
I get a black screen when I play videos in Windows Media Player and Windows Media Center.
Until recently, all worked well for a long time. Now when you try to watch live TV or a DVD, I get a black screen with sound in Windows Media Center and trying to watch a DVD in Windows Media Player I also get a black screen with sound. The controls are there and functioning normally. DVDs are normally visible in the K-Lite Media Player Classic.
I have Windows 7 Ultimate 64-bit, a tuner TV of SiliconDust HD Homerun networked and a videocard ATI Radeon 4550. I have all the latest updates.
I found and tried many recommendations of the Internet for problems like this, and none helped.
The video card driver is the latest provided by ATI to Microsoft for Windows Update and is dated from 19/04/2011. I tried to install the latest Catalyst software and driver from the ATI site, which does nothing to help, and then uninstalled. These drivers provide no option to adjust the hardware acceleration.
I had an older version of K-Lite codec package installed. The problem does not change if I have the old version, the last 32 + 64 bit version or no version installed.
In Control Panel, I tried to disable Windows 7 media, reset their reactivation components and reboot again. There is nothing.
I had an older version of installed package from Cyberlink. The problem remains the same if I have the old version, the version the most recent or any installed.
I tried to uninstall all Apple software: QuickTime, iTunes, etc. There is nothing to help.
I tried to create a new user account; same problem there.
I have VMware and a virtual machine that is running 64-bit Windows 7 Professional. In this machine, I can view DVD normally with Windows Media Player, using the same physical DVD drive. I don't have Media Center set up in this machine.
Title photo: original No. in Media Center and Media Player
The problem is now resolved. I removed the software installed probably because the problem started, and Cisco Webex, which I did not need, was probably the culprit, although I'm not 100% sure.
Thanks to those who have tried to help.
-
I get a black screen saying 'OS install mode' when I start my computer
Original title: The OS Install ModeWhen I turn on my pc, before starting, I get a black screen saying "os install mode. So, I have to pressing f1 so he can begin upward. Then, it takes 10 to 15 minutes to start. How can I change so that I don't have to make that choice. I read that it is in the BIOS but I don't know what that means. It is a XP system.Thank you!!Hello1. What is the number of brand and model of your machine?I suggest you see the computer user's manual or contact your OEM (Original Equipment Manufacturer) for a better support.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Tecra A8 does not start - I get a black screen
At the start of my TECRA A8 I get a black screen (invalid file Booting from c:\Windows Boot.INI).
Why is this happening?BIOS update did not resolve it.
Hello!
I think that an update of the BIOS peut t solve this problem, because there is something wrong with the installation of Windows and the BIOS has nothing to do with it. If don t mix these different things.
In your case, I would like to use the Toshiba Recovery disk to reinstall Windows. This should solve the problem because the disc contains factory settings. After that, you should be able to start Windows again.
Good bye
-
Get the black screen at boot: status: 0xc000000f
Original title: status: 0xc000000f
I get a black screen when I turn on my laptop (Windows Boot Manager)
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert your windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."
I followed all the instructions and still it will not read the installation disc.
I put in the disk and restart the computer, but it brings back me to the same black screen.
File: \Windows\system32\winload.exe
Status: 0xc000000f
Info: The selected entry could not be loaded because the application is missing or damaged.
Can someone help me with this question to where it will read the disc. or what I am doing wrong?
I got Appreciate your help :)
Ok.
You can watch the image here - is your BIOS looks in this picture:
https://SkyDrive.live.com/#CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21177
If so you can try everything first:
(1) turn on (or restart) your office
(2) press on
instead of - you should see "Start menu", where you must select "Drive of CD-ROM. If
does not work (this means no "Boot menu" only appeared), then you need to change "Boot Device Priority" - go into the SETUP (Now choose "Drive of CD-ROM" (arrow down) and by using the key + or - move the first CD-ROM drive. Press on
(save & exit). Use this DVD:
1. MICROSOFT WINDOWS VISTA HOME PREMIUM SP1 X 86
LC
-
When I start my PC, I get a black screen that says ultra dma mode-6 extended s.m.a.r.t. capable but disabled keyboard interface error press fi to resume when I do that it starts as normal, when I posted e logitech about this they said: enable smart in bios and save. I can't remember if they said it was a hard drive or a hardware problem, how can I go to the bios either no matter what. I have a keyboard and wireless mouse
Thanks M Clark
Hello
I suggest to reset the default settings to default and check for the issue.
You may also contact the manufacturer of your BIOS to change these settings.
Important note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. -
recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.
Hello
Try the following.
Boot the computer normally and log.
Black screen, old the ctrl and alt keys and press delete.
Select Task Manager.
Click on file and select the new task.
Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.
When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.
Kind regards
DP - K
-
Get a black screen display during the installation of the center of Catlyst ATI in Windows 8 Pro
HP Pavilion dv6t-3100 CTO Entertainment Notebook PC Serial number (S/N): product number [personal information deleted] (P/N): ww142av of operating system: Microsoft Windows 8 Pro (64-bit)
Get dipslay black screen when I tried to install the latest ATI Catalyst Center (ATI CCC) in my laptop. After restarting my laptop too, I get the same screen for balck disply.
When I was in Windows 7 Home Premimum I am able to swicth the ATI to Intel grsphics display option. After upgrding to Windows 8 PRo that I am faced with this display problem. Is this related to the software HP power manager or even in connection with the question of compatibility Windows 8 PRo.
Please help me to solve this problem as soon as POSSIBLE.
Click with the right button on amd drivers and click on update driver. After "Browse my computer for driver software" => 'Let Me pick from a list of drivers on my computer'-online 'have disk... '. "and stick to the location of W76A_INF.
And have you tested uninstall intel hd graphics card before you install amd?
Well, I really prefer to install drivers leshcatlabs instead, they are more up-to-date drivers.
-
Original title: windows does not
I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs
What can I do?
Enter your bios usually with keys F2 or delete to the first powered
Use default Optimize can be the F5 key and save and exit,
Insert your installation disc or flash media and press F8 or F12 to boot on it
Then use the recovery tools to run the Startup Repair tool.
http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7
Maybe you are looking for
-
Please simply do your job like everyone else and you light Skype for Nokia 510.
-
Through icons or "all programs" do not work.
Only programs started by opening the files on a USB drive or AutoPlay function. Failed attempts to run a program through "All programs" or the desktop icons... I wonder what program should be used for the bCette .exe file. any ideas? Maintenance i
-
What does Nexus 1000v Version number Say
Can any body provide long Nexus 1000v version number, for example 5.2 (1) SV3 (1.15) And what does SV mean in the version number. Thank you
-
BIG BUG: Pre stuck on mode headphones! Help
I was listening to music on my pre and had plugged my earplugs I call then I unplugged them and now I can only make calls using the speakerphone or bluetooth headset and the internal speaker stopped working. During a call, if I look at the icons at t
-
two IP subnets on LAN to the virtuall Server
Hey guys,.i ' v the following scenario:1 x ESXi server with two server RDS W2K8R2 (this host IP: 192.168.0.224)multiple virtual servers running on the ESXi host assigned IPs to within this range: 192.168.0.1 to 192.168.0.254 241 x LAN physical that t