Initialization of the variable error

Similar Questions

• Deploy the agent EM12C initialization of the phase error sending software agent

  During the deployment of EM12C in the initialization stage - software agent agent sent to the error of host target
  The file to the SGD/m02 / midd/WHO/sysman/agent / 12.1.0.2.0 AgentCore226. Zip is copied to the host/m01 ADATMP_2013 on 192.168.165.83 - 03-28 _11-01-33 - error failure AM message: PROV - 16011: Auth fail
  Exit code: 0
  (1) the user authentication is oracle
  (2) the target users oracle sudo ls-l/root this command
  (3) the em can SSH connection to the target host

  Why are you using "-ignorePrereqs" parameter? You should not use this parameter to this than recommended by Oracle support or running in some soaps question. It will ignore any pre - req check and it is not recommended to ignore any failure pre - req controls, that can cause more problems with agent later.

  one) from ping target machine omshost
  Ping
  (b) of the Agent machine, run the below

  wget http://:/empbs/genwallet
  or
  wget https://:/empbs/genwallet
  Someone at - he of the foregoing should be connected to the machine of the WHO.

  Above two work then try installing the agent with on the "-ignorePrereqs" parameter and look in the more detailed error log file: agent_home/cfgtoollogs/agentdeploy/*.*

• during the initialization of the variables in model

  I use for my Cairngorm application and there are hundreds of variables in my model. I need reset/initialize variables when I select another customer. Is there an easy way to do this?
  
  Thanks in advance.
  

  The simplest, most certain way is to simply call navigateToURL with the path to the wrapper html application.

  It will produce an entirely new instance of the Flash Player and the application.

• ORACLE ADMINISTRATION TOOLS - MANAGE SECURITY AND THE VARIABLE - PROBLEM

  To manage security, I use an external "DIM_DMT_PRIVILEGE" table with 3 columns: user, Type and value
  
  I created a block of initialization in the variable management section named 'CATEGORY' by the next expression of inititialisation:
  
  SELECT "CATEGORY", DMT_VALUE_CD
  OF DIM_DMT_PRIVILEGE T
  WHERE T.DMT_TYPE_CD = 'CT '.
  AND)
  High (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.) THE USER) ")"
  OR T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) (GROUP)')
  
  The problem is that the initialization state * "upper (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.)" "USER)") "* success but the other *" or T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) GROUP) ")" * don't.
  
  In the external table, the column user contain users and groups of users, security groups, and users.
  
  Thanks for your help,
  
  Kevin

  Hello

  In your select statement, you must use the name of the database table columns and not the names of the variables defined in the initialization block.

  Looks like you used the names of variables in a query, if I understand correctly.

  According to my understnading, you must use...

  SELECT DMT_TYPE_CD, DMT_VALUE_CD
  OF DIM_DMT_PRIVILEGE T
  WHERE T.DMT_TYPE_CD = 'CT '.
  AND)
  High (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.) THE USER) ")"
  OR T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) (GROUP)')

  It will store these values corresponding to you first two variables defined in the initialization block.

• Code to skip the steps: initialization of local variables failed

  Hi all

  I'm upgrading some software LabVIEW RT I inherited LabVIEW 2011 to 2015 LabVIEW (32-bit) on a host Windows 7 Professional PC. The target is an SMU-8135. The software ran well when it is compiled under LabVIEW 2011.

  I modified the code to enable the monitoring of what is happening by looking at screen on the target outputs. The initial error that brought me here is that a local cluster variable initialized in the first window of the flat sequence described below have been appearing as the in windows later.

  The code begins with the initialization of local variables in the first window of a flat sequence and provides a quick line of text output to the display of the target (call this text #1) (using RT Debug String.vi) I send two lines of text so that a new row is created and later text does not replace it. . It then writes to the next window in the sequence flat screen two groups of text output to the target. Second text in the window 2 (#3 text) output is equipped with a wire entry from the error from the first text output in the second window (text #2). That is the second exit must wait for the first exit to complete before being sent to the screen.

  I see now some weird symptoms:

  1. when I connect to the target under a remote debugging session I see expected display outputs. Not remotely connected, text #2 is displayed. The code passes to the third window in the flat sequence, so everything in the two window should have executed.

  2. the text #1 appears on the target screen * before * I get the message "Welcome to LabVIEW Real-time 15.0." Is this normal? Whence this message? I searched my screws and subvis to this text and it is not there then it mucst come LabVIEW screws somehow.

  This all started with local variables no initialization in the first window, so apparently, I have a problem of data flow. Given that the problem disappears under the remote debugging, I'm a bit of a loss.

  Thanks in advance for any help,

  Eamonn McKernan

  EamonnMcKernan wrote:

  Text 2 appears only when remotely connected it does not appear when running at startup.

  Your "text 2" seems to be powered by a collection of nodes comments to "initialize on compile or load.  This will return once the empty string the first and therefore should not be display nothing until the code I run a second time.  That is the crux of feedback for?

• First construction of DEFAULT DOMAIN for "Integrated Weblogic Server" in jDeveloper 12 c gave ERROR: wlst > error occurred during initialization of the virtual machine;

  Hi my community developers estimated!

  I just installed Oracle jDeveloper 12 c as part of the new version BPM Suite 12 c successfully on my LAPTOP.

  However, when I try to create the first integrated default for the weblogic Server domain to run by using the database of embedded JAVA (do NOT use an external Oracle DB) - I get the following error in the log below:

  QUESTION - how/where can I change the ' USER_MEM_ARGS = - Xms32m -Xmx1024m' specification in jDeveloper, to allow a smaller 'MAX MEMORY setting, instead of Xmx1024m"since I DO NOT have enough memory (virtual) on my laptop to create the default domain.

  Thank you very much!

  Please see from the log of the errors below:

  Add the environment variable to WLST script = - Xms32m USER_MEM_ARGS - Xmx1024m - XX: MaxPermSize = 384 m
  Log file: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain.log
  Label: JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S
  Home product: C:\Oracle\Middleware\Oracle_Home\jdeveloper\jdev\
  Area: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain

  2014 BuildDefaultDomain2.py - 07-04 18:00:03

  cmd.exe /c "" C:\Oracle\Middleware\Oracle_Home\oracle_common\common\bin\wlst.cmd""D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain2.py""
  Process began
  WLST > error occurred during initialization of VM
  WLST > could not reserve enough space for lots of things
  WLST > error: could not create the Virtual Machine Java.
  WLST > error: a fatal error has occurred. Program ends.
  Elapsed time: 437 ms

  Thanks James, I changed the memory allocation in the WLST script and I no longer get the VM error

• Sage line initialized the variable in the WHERE clause of another block of initialization

  Hello
  I have following problem.
  
  I created a block of initialization (called A) which initializes a wise session variable line.
  
  Ex: SELECT X, Y, z
  
  SELECT statement returns 3 rows (it is a block of initialization sage line!)
  
  So I want to create another block of initialization that uses in its cluase WHERE the sage variable line previous
  
  Ex: SELECT W, T of R where F = VALUEOF (NQ_SESSION. (A)
  
  I have the following error: DB2 - UDB: token SQL10104; was not valid, valuable chips:...
  
  I believe that this error is caused by the fact that VALUEOF (NQ_SESSION. (A) is translated by OBIEE inside (a list of values separated by; and not by).
  
  Can you suggest me a solution?
  
  Thank you
  
  Giancarlo
  
  P.S. I use OBIEE 10 G

  You can avoid this by rewriting it as

  t w, select
  r
  where f (with x = 'A' by selecting y in z)

  Kind regards

  Robert

• array variable error a number of clues or the beach size incorrect index overflow

  I get the following message appears at the beginning ' error: variable table a number of clues or overflow from the beach size incorrect index "how to get rid of this problem?

  It sounds like something you have running at startup fails because it was written wrong. You need to know what it is. First of all, make sure that the computer is free of viruses/malwrae by making a scan.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Then, if the computer is clean and the problem persists, troubleshoot your startup.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  (For Vista) Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• error 1114 dynamic link library (DLL) initialization of the routine failed.

  I can't connect to internet

  Windows could not start the Service diagnostic on the local computer policy.  error 1114 dynamic link library (DLL) initialization of the routine failed.

  What is the solution to this problem everyone?

  Hello
  1 did you change on your computer before this problem?
  2. When you receive this error message?
  3. are you using Internet Explorer? If Yes, what version of IE are you running?
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

   
  Follow the suggestions and check if that helps.
  Method 1
  (a) click Start .
  (b) in the search box type services.msc
  (c) right click on Diagnostic Policy service and go to the Properties.
  (d) select Auto under Startup type.
  (e) click Start .
  (f) click on apply and OK.
  (g)restart your computer.
   
  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 3
  You can perform the clean boot to see if a service is causing this issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual
  See also:
  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• When you start the computer, the error: "year error occurred in the program during the initialization of the error Code 0 x 80070002.

  Buy HP Pavilion with Windows 7 64 bit.  Migrate some applications and files of old laptop computer with Vista 32-bit.  Most applications migrated work but when I start the new computer, still get this error message: "year error occurred in the program during the initialization of the error Code 0 x 80070002. Once I close the error message box, applications seem to work.  What is a real problem or just a nuisance, I can't ignore?

  original title: Error Code 0 x 80070002

  Hello

  I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not occur in safe mode, and then perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Perform step 7 to put the computer to a normal startup.

• error of initialization of the local db

  Hello

  on Siebel 8.1.1.8 I get the following errors when you attempt to initialize the local promoter database:

  Error: Directory/Fs/att, / Fs2/att, att/Fs3 / does not exist.

  SBL-DCK-00179: could not establish the synchronization with the server session.

  Before that, I have successfully completed the following steps:

  -Add the user for mobile Siebel remote

  -generate new models of db

  -extract from the database

  -check that all the components of Siebel remotely are in Active state

  Once I have start Siebel Tools with the data source local and allow the tools to connect remotely to Siebel, I get the mentioned error.

  
  

  It is a Siebel File System company parameter with the value "/Fs/att, / Fs2/att, att/Fs3 / ' and these directories exist on the application server. Where else should be created?

  Please suggest, what don't get me.

  Thanks in advance

  Hello

  Check if the local database initialization works by connecting the computer to the developer with a domain account. Check the Doc ID 483574.1 on My Oracle Support to find additional information.

  It will be useful,

  WSiebel

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Hi Rose

  Refer to the troubleshooting error messages | CS5, CS5.5 bootstrapper

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  I hope this helps.

  Thank you

  Varun

• ORA-28546: initialization of the connection failed, probable Net8 admin error

  I'm unable to access DB SQL Server to Oracle

  ERROR on line 1:

  ORA-28546: initialization of the connection failed, probable Net8 admin error

  ORA-02063: preceding the line of ODBC

  Please suggest? Here are the details:

  DBlink is

  Create the link to ODBC database to connect to 'his' identified by "orcl" using "master";

  File D:\app\admin\product\11.2.0\dbhome_1\hs\admin has initMaster.ora

  HS_FDS_CONNECT_INFO = master

  HS_FDS_TRACE_LEVEL = OFF

  ORACLE_HOME (D:\app\admin\product\11.2.0\dbhome_1\NETWORK\ADMIN) file has listener.ora and tnsnames.ora as follows:

  1. tnsnames.ora:

  tnsnames.ora # Network Configuration file: D:\app\admin\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  LISTENER_ORCL =

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl)

  )

  )

  Master = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=FILT137) (PORT = 1521)) (CONNECT_DATA = (SID = master)(HS=)))

  #Master = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=FILT137) (PORT = 1522)) (CONNECT_DATA = (SID = Master))(HS=OK))

  1. Listener.ora:

  listener.ora # Network Configuration file: D:\app\admin\product\11.2.0\dbhome_1\network\admin\listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\admin\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\admin\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = D:\app\admin

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = master)

  (ORACLE_HOME=D:\app\admin\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  )

  Problem-

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  Solution-

  Made 'Master' DSN for 64-bit and 32-bit help following and it resolved.

  For 64-bit ODBC locates here (c:\windows\system32\odbcad32.exe).

  For 32-bit ODBC locates here (c:\windows\sysWOW64\odbcad32.exe)