Initialization parameter in the PB Toolkit

Similar Questions

• Problem with initialization parameters of the source of the CAD system

  Hello
  I have created a container, initialized the system settings source in CAD ($INITIAL_EXTRACT_DATE = 01/01/2008, $LAST_EXTRACT_DATE = 01/01/2008) and performance 'Human resources 11.5.10' plan transaction. One of the tasks (SDE_ORA_PayrollFact) was performed too long. When I analyzed the log file I saw SQL code with strange condition:
  where w_payroll_f.last_update_date > = 1700/01/01...
  
  In a mapplet there was a SQL override in condition:
  where w_payroll_f.last_update_date > = $$ LAST_EXTRACT_DATE
  
  So where the parameter $LAST_EXTRACT_DATE value was taken?
  
  Several other in the settings SDE_ORA_PayrollFact.txt $INITIAL_EXTRACT_DATE = 01/01/1970, $LAST_EXTRACT_DATE file = null.
  Please, explain the DAC and Informatica algorithm for initialization of the settings!
  
  How can I set these settings to get the desired result, $LAST_EXTRACT_DATE = 01/01/2008?
  That the level of the initialization parameter has the highest priority?
  Best regards.
  
  Published by: Alina HS on 15.09.2008 23:15

  Alina,
  You seem to have taken the right steps. You have created a custom container (as it should) and have customized the values there.
  However, I have a strange feeling that your execution plan is not looking at your custom container. Look at the subject areas associated with the title of your implementation plan. They should be referred to your custom container. If this isn't the case, yet its reading of the values out of the OTB one.

  If this is the case, associate your custom container for the EP SAs AND re - build the EP.

  As the LAST_EXTRACT_DT is concerned, it is a setting that DAC would provide before calling infa workflows. If you charge for the first time, it will be null. In incremental mode, you will see the value as seen in the Setup-> data sources-> tab Update Dates.

  However, when this particular value (the internal representation of this value DAC) is zero, the DAC server should be running the command of full load. Inspect the execution history and ensure that full load control is one that is running. If so, its worth looking into the sql session substitute and/or the map itself to see how this parameter is used.

  I hope this helps!

  Published by: user743400 on Sep 16, 2008 11:28

• update the initialization parameter, spfile created on ASM

  Hello

  I would like to increase my database OPEN_LINKS initialization parameter.

  My created spfile ASM storage

  SYS@main1_1 > view the spfile parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  +DATA_DG/main1/parameterfile/spfilemain1.ora string SPFile

  ASMCMD > pwd

  + MAIN1/DATA_DG/FICHIER_PARAMETRES

  ASMCMD > ls

  SPFile.333.833957263

  spfilemain1.ora

  ASMCMD >

  $ cat initmain1_1.ora

  SPFile='+DATA_DG/main1/parameterfile/spfilemain1.ora'

  Any help, greatly appreciated

  Thank you

  It does not matter where is the spfile.

  The command is

  ALTER system set open_links is... scope = spfile;.

  and bounce the database. IIRC, open_links is a static parameter.

  Note: Please do NOT change the spfile with a text editor, such as vi or vim.

  --------

  Sybrand Bakker

  Senior Oracle DBA

• Looking for info on the _parallel_syspls_obey_force initialization parameter

  We regularly get the message about "nonconformity"-OEM
  
  ***************************CUT HERE***********************
  
  The database uses the non-standard initialization parameter parallelsyspls_obey_force, that has the value TRUE. Using non-standard initialization parameters can cause database issues that are difficult to diagnose.
  
  
  ***************************CUT HERE***********************
  
  
  We lack of RDBMS Oracle 11 g 2 (11.2.0.3.2) and Oracle Enterprise Manager Grid Control 11 g on Linux x 86-64. I searched on the usual sites (e.g. My Oracle Support, Oracle 11 g of baseline, this forum, AskTom and Google) and I'm not having any luck finding what parallelsyspls_obey_force is or what it does, and why, it is set to TRUE is apparently 'bad' (i.e. non-standard). Before I change to FALSE (I guess that will make happy OEM), I would like to know a little more about it.
  
  Can someone tell me what is this parm and what potential impact it can be if I set it to FALSE?
  
  Thank you!
  
  Jon

  Hi Jon;

  Please see:
  Violations of the false for political use DB initialization parameter not Standard PARALLELSYSPLS_OBEY_FORCE [ID 1378266.1]

  Respect of
  HELIOS

• Table query result using prepared as a parameter in the prepared statement later

  Hi all

  Very new to PHP. A series of 3 prepared statements (see code below), I'm trying to sink.  This page is triggered from a link on a page that lists the individual and all candidates which works well.  Prepared statement 1 works and displays the data in the columns line wanted specific, bottom access so I would call it record and areas, but I think it is called line and columns here.  Prepared Statement 2 which hands on a table of cross references (we have a many-to-many relationship between candidates and positions, therefore for the table of cross references) works and I can say the $selected_positions charges table, because I can see position_id data in the < body > of the file using this:

  <? PHP

  foreach ($selected_positions as $item) {}

  echo $item. "< br / > ';

  }

  ? >

  Can't take this $selected_positions table and use it as parameter in the prepared statement 3, at least not how I try to do.  So obviously he manages not prepared statement 3 no way is a table that I called $the_positions which is supposed to contain the ID of the post, position of securities and to position the position_id numbers that are in the array $selected_positions.  I can say that 3 of prepared statement is a failure because there is no indication in this table that is in the < body > of the file:

  < table class = "stripes table" >

  < b >

  Identification of the Position < /th > < th >

  < /Th > < th > post number

  Title < th > < /th >

  < /tr >

  <? PHP while ($stmt-> fetch()) {? >}

  < b >

  < td > <? = $position_id;? > < table >

  < td > <? = $position_number;? > < table >

  < td > <? = $title;? > < table >

  < /tr >

  <? PHP}? >

  < /table >

  Here is the PHP script:

  <? PHP

  require_once '... /includes/session_timeout_db.php';

  ? >

  <? PHP

  require_once '... /includes/Connection.php';

  initialize the flag

  $OK = false;

  $conn = dbConnect ('read');

  initialize statement

  $stmt = $conn-> stmt_init();

  If (isset($_GET['candidate_id'])) {}

  $sql = ' SELECT candidate_id, last_name, first_name, society, mas_number, last_modified, notes

  CANDIDATES WHERE candidate_id =?'; }

  If ($stmt-> {prepared ($sql))}

  bind the query parameter

  $stmt-> bind_param ('i', $_GET ['candidate_id']);

  run the query and fetch the result

  $OK = $stmt-> execute();

  bind the results to variables

  $stmt-> bind_result ($candidate_id, $last_name, $first_name, $company, $mas_number, $last_modified, $notes);

  $stmt-> fetch();

  free resources for the second query database

  $stmt-> free_result();

  }

  get the associated positions candidate

  $sql = 'SELECT position_id FROM pos2cands WHERE candidate_id =?';

  If ($stmt-> {prepared ($sql))}

  bind the query parameter

  $stmt-> bind_param ('i', $_GET ['candidate_id']);

  run the query and fetch the result

  $OK = $stmt-> execute();

  $stmt-> bind_result ($position_id);

  Browse the results to store in a table

  $selected_positions = [];

  While ($stmt-> fetch() {)}

  [] $selected_positions = $position_id;

  }

  }

  find data on the position of the table

  $sql = ' SELECT position_id, position_number, title

  FROM place WHERE position_id =?';

  If ($stmt-> {prepared ($sql))}

  bind the query parameter

  $stmt-> bind_param ('i', $_GET [$position_id]);

  run the query and fetch the result

  $OK = $stmt-> execute();

  bind the results to variables

  $stmt-> bind_result ($position_id, $position_number, $title);

  Browse the results to store in a table

  $the_positions = [];

  While ($stmt-> fetch() {)}

  [] $the_positions = $position_id;

  }

  }

  Get the error message if the request fails

  If (isset ($stmt) & &! $OK) {}

  $error = $stmt-> error;

  }

  If (! $stmt) {}

  $error = $conn-> error;

  } else {}

  $numRows = $stmt-> num_rows;

  }

  ? >

  Thank you in advancel

  You want to use the value of request 1 or query2 as a parameter in the query 3, right? Rather than build a table, you can simply use the value returned by each line that the query returns. I use PDO, no MySQLi, so I can't knock out quickly the MySQLi example for you.

  While ($result = $sql-> fetch (PDP::FETCH_ASSOC)) {}
  $field = $result ['domain'];

  Now we can use the value of $field as parameter for the next query.

  The brace that closes the while loop is placed after the last query

  so no need to fill an array with values

  }

  Your approach is doable with a few changes to the way in which you go through the table, but it is unnecessarily complicated.

  You might be able to use a single query to get all the data if you use left joins. With this approach, you start with the table that SHOULD return a result or which requires no dependencies to other tables. The structure is like this:

  SELECT field1, Field2, field3 FROM (SELECT * FROM table1 WHERE field3 = param1) has

  LEFT JOIN (SELECT * FROM table2 WHERE A.field4 = table2.field4) B

  LEFT JOIN table3 ON table3.field5 = B.field5 ORDER BY Field1

  A and B above are aliases for subsets of the table. You can image a (tacit) sign = equal A

• Relationship between physical memory and oracle initialization parameter

  Hi all
  
  I had been confused with the oracle initialization parameter setting.
  
  When set us the oracle initialization parameter. For example: Shared pool size, db_cache_size, target memory.
  
  What to consider about the physical memory to the operating system. If so, how to address the issue?
  
  Please notify. Thank you.

  SagiGal wrote:

  Review you mean that if the physical memory is 2gig, and you are ready to set the SGA greater than this, it will work or not, the answer would be that it would be a very bad thing to do. These parameters represent the SGA, which must be restricted in respect of the maximum physical memory available on the server.

  See the link given by Rp. From 10 g, it rarely need this kind of tuning.

  Aman...

  Understand. Thank you. Can answer me another question?

  SQL > show sga parameter

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  lock_sga boolean FALSE
  PRE_PAGE_SGA boolean FALSE
  very large integer SGA_MAX_SIZE 1152 M
  SGA_TARGET large integer 0
  SQL > show the spfile parameter

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  chain of SPFile

  in the above scenario, the database do not use EAMA and spfile
  If I wan to increase db_cache_size parameter, do I rebounce instance?

  Could be very easily answer this question for yourself by searching for the parameter in the docs. See here,
  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams052.htm#REFRN10033

  Its a dynamic parameter and does not need a db bouncing to change.

  Aman...

• Is it possible to access the task flow parameter in the EOImpl.create () method?

  Hello
  
  Is it possible to access the task flow parameter in the EOImpl.create () method? In the affirmative, please let me know how to access.
  FYI... I have a CreateInsert < xxx > activity in the workflow, which, I believe, called the EOImpl.create () method internally. During the creation of the entity, I want to assign a default value based on the parameter of workflow.
  
  Thank you

  A way to pass parameters from workflow for the model is during the initialization of the workflow. To do this, you can create a prepare() method in the Module of your Application and call it from the workflow. By defining this method by default in your workflow, it will be called every time that the workflow starts. You can pass any task rate desired as the arguments of a function prepare() method. In the prepare() method, save the workflow of the values for parameters in the transient variables EO or VO. These variables will then be accessible in the create() methods.

• ORA-25138: HASH_JOIN_ENABLED initialization parameter has depricated

  Hi all
  
  I'm migrating a database (9.2.0.7.0) from one windows server to another windows server. The goal I created 10.2.0.1 database.
  
  I copied the pfile file even the 9i database and when I put the command I get below error below
  
  ORA-25138: HASH_JOIN_ENABLED initialization parameter has been deprecated
  
  Please help me solve this. I searched in metalink, but there is no help.
  
  My pfile file contains more entries
  
  +###########################################+
  + # Optimizer +.
  +###########################################+
  hash_join_enabled = FALSE
  query_rewrite_enabled = FALSE
  star_transformation_enabled = FALSE
  
  Concerning
  Arun

  But is this going to affect my database anyway?

  If the current value is as shown below

  hash_join_enabled = FALSE

  How behavior does not change when it is deleted?
  DB did not begin with this option.

• Problem of initialization parameter

  Hi all
  I use Oracle 10 g and spfile.
  Please, I would like to know that if it is possible when an initialization parameter P is not dynamic, these commands have the same effect (I guess p_value is a value that the parameter P can be set):
  First command: change the entire system P = p_value deferred;
  Second comand: change the entire system P = p_value scope = spfile;
  Thanks in advance for your answers.

  user639304 wrote:
  Hi all
  I use Oracle 10 g and spfile.
  Please, I would like to know that if it is possible when an initialization parameter P is not dynamic, these commands have the same effect (I guess p_value is a value that the parameter P can be set):

  You mean validated commands can be used to change the dynamic settings.

  First command: change the entire system P = p_value deferred;

  Depends on and you can find out by checking the column isses_modifiable of the parameter $ v

  Second comand: change the entire system P = p_value scope = spfile;

  Yes, it can be changed.

  Thanks in advance for your answers.

  Concerning
  Anurag

• How to set the NLS_COMP parameter to the instance level?

  In Oracle 11 g, we can change the NLS_COMP and NLS_SORT setting at the session level. But how to put at the instance level. It has been said (see http://www.orafaq.com/node/91) which can be donw with the operating system environment variables. I did on Linux

  export NLS_COMP=linguistic
  export NLS_SORT=BINARY_CI

  Then check with

  select * from NLS_INSTANCE_PARAMETERS where parameter in ('NLS_SORT','NLS_COMP');
  PARAMETER                      VALUE
  ------------------------------ ----------------------------------------
  NLS_SORT
  NLS_COMP                       BINARY

  The parameter are undefined.
  
  ALTER instance does not work:

  ALTER SYSTEM SET NLS_COMP=ANSI; 
  ORA-02096: specified initialization parameter is not modifiable with this option

  How to configure the instance parameter?

  Try: -.

  ALTER SYSTEM SET NLS_COMP = ANSI scope = spfile;

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28320/initparams135.htm

• * ORA-32006: SQL_TRACE initialization parameter has been deprecated *.

  Oracle 10.2.0.1
  
  SQL > startup pfile='/home/oracle/product/10gR2/dbs/uni2init/initora01.ora '
  ORA-32006: SQL_TRACE initialization parameter has been deprecated.
  ORACLE instance started.
  
  Total System Global Area 1879048192 bytes
  Bytes of size 1220072 fixed
  184549912 variable size bytes
  1677721600 of database buffers bytes
  Redo buffers 15556608 bytes
  Mounted database.
  Open database.
  
  init.ora
  
  ORA01.__db_cache_size = 1677721600
  ORA01.__java_pool_size = 16777216
  ORA01.__large_pool_size = 16777216
  ORA01.__shared_pool_size = 150994944
  ORA01.__streams_pool_size = 0
  *.audit_file_dest='/home/Oracle/product/Admin/ORA01/adump '
  *.background_dump_dest='/home/Oracle/product/Admin/ORA01/bdump '
  * full = '10.2.0.1.0'
  *.control_files='/home/oracle/product/oradata/ora01/control01.ctl','/home/oracle/product/oradata/ora01/control02.ctl','/home/oracle/product/oradata/ora01/control03.ctl'
  *.core_dump_dest='/home/Oracle/product/Admin/ORA01/cdump '
  * .db_block_size = 8192
  * .db_domain = "
  * .db_file_multiblock_read_count = 16
  * .db_name = "ora01".
  *.db_recovery_file_dest='/home/Oracle/product/flash_recovery_area '
  * .db_recovery_file_dest_size = 2147483648
  *. Dispatchers ='(Protocol=TCP) (SERVICE = ora01XDB)"
  * .job_queue_processes = 10
  * .log_archive_dest_1 = ' LOCATION = / u06/ARCHIVE_LOG.
  * .log_archive_max_processes = 3
  * .open_cursors = 300
  * .pga_aggregate_target = 791674880
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .resource_manager_plan = "SYSTEM_PLAN".
  * .sga_max_size = 1879048192
  * .sga_target = 1879048192
  * .sql_trace = FALSE
  * .undo_management = "AUTO".
  * .undo_retention = 18000
  * .undo_tablespace = "UNDOTBS1.
  *.user_dump_dest='/home/Oracle/product/Admin/ORA01/udump '
  * .utl_file_dir ='* '
  
  Published by: user618704 on March 3, 2009 21:37

  Hello

  Remove the parameter sql_trace of the init.ora file and try again.

  * .sql_trace = FALSE

  Concerning

• Dynamically Open VI and him pass a parameter to the dynamically open VI

  I want to open a vi dynamically, at the same time I have to pass a parameter to the dynamically open VI. Is it possible to do?

  Thank you

  Chrystelle Roy

  Passionate about LabVIEW

  Check here https://zone.ni.com/reference/en-XX/help/371361M-01/lvconcepts/dynamic_loadcall_vis/

• Ramping blamed the parameter in the profile of Stimulus Editor.

  Hello

  I am trying to familiarize themselves with the new Stimulus profile editor and encounter a problem I don't know how to solve.

  I have a model-driven setting. In one of my unit tests that I want to make a mistake on this parameter and the fault should scale the value exactly as the ramp function.

  I can do this within the profile of Stimulus editor himself or how can I do?

  / Johan

  You can do this with a custom real-time sequence. The easiest way would be to make a copy of the sequence of integrated ramp and modify it slightly to a fault of the parameter output instead of a simple assignment. You can open this sequence simply by double clicking it in the palette in sequences. If you open the sequence in real time of the ramp in the standard library, you will see the line where he attributes the current value of the ramp to the output parameter:

  RampOut = (I * Increment) + InitialValue

  All you have to do to change this from a standard to a fault assignment as assignment follows:

  fault (RampOut, (I * Increment) + InitialValue)

  Note there is a bug in the VM of real-time sequence that could not completely error a channel of the system unless another channel is currently failing. The easy solution is to create a dummy user and fault channels it in Manager fault channel of dialogue for the duration of your test.

• HP-Envy 100 D410a just shows (INITIALIZE) is on the screen!

  HP-Envy 100 D410a was printing then stopped. When I turned it back on, just shows the printer (INITIALIZE) is on the screen! It was after I left the power for hours. Can't do anything to the screen.  My firmware Version is: SLM1CN1039FR

  Hello

  If your printer is connected wireless, make sure temporary connect the USB device, and then follow the patch below:

  Windows:

  http://ftp.HP.com/pub/softlib/software12/COL37748/MP-92513-1/D410Envy_FWUpdate_4684_HPCOM_x86_v2.exe

  Macintosh:

  http://FTP.HP.com/pub/softlib/software12/COL37909/MP-92884-2/HP_Firmware_Updater.dmg

  Please let me know if this is useful,

  Shlomi

• During the installation of Windows, shows that an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  Hello Stephen,
  try to run the "Startup Repair" utility located on your installation DVD.
  hope this helps
  Eddie B.