Inject third-party drivers during the restoration

Similar Questions

• Where to install third-party drivers for LabVIEW

  Hi, I have not used LabVIEW in several years.

  I downloaded many third party drivers and saved locally on my C:\.

  Where should I move these .lib files so that I can use their throught it works Palette?

  Is there a certain structure should I use when registering these?

  Also, what is the difference between user.lib & instr.lib files?

  I tried to find the folder as shown in the following tread but I can't seem to find the file:

  How to install my third-party instrument Drivers?

  It is what the recommended action:

  

  Can anyone help?

  Kind regards

  Seamus

  InStr.lib is for instrument drivers.  User.lib is your own private libraries.

  I'm guessing that you are on a 64 bit OS.  So you should look in C:\Program Files (x 86) \National Instruments\LabVIEW (20XX) \instr.lib

• During the restore system to a previous restore point, I got this error 'access denied 0x80070005.

  original title: 'access denied 0x80070005.

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  Possibilities:

  1. you are not the administrator. You don't have to enter the admin password valid when he asked for it.

  2. you probably have the problem with the infection by the virus.

  If you ARE the admin, suggestions:

  a. run a full scan.

  b. If the machine is clean, do your Safe Mode system restore.

  How to go in safe mode?

  Restart > immediately and repeatedly tapping the F8 key until you see a black and white scree > top? Touch down arrow, and then select Safe Mode > Enter > now that you are using safe mode. Make your system restore.

• I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.

  Original title: Windows 7 system restore always fail.

  I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.  I don't have Norton AntiVirus.

  If anyone can help solve me this problem I would be very grateful.

  Thank you for your response.  I forgot to mention in my first post, I tried both methods without success.  However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.

  Thanks again.

• Is it possible to add extensions of party 3rd during the trial period for the PS?

  Is it possible to add extensions of party 3rd during the trial period for the PS?

  Yes it is possible.

• Need drivers for the C-UV35, a bluetooth Logitech dongle.__Wiil be installed by XP only or I need third-party drivers?

  Logitech C-UV35 comes with bluetooth Logitech BT + mouse combo.

  It's a usb bt dongle.

  Win XP install drivers or I need a third party s/w.

  It will work s/w - http://www.broadcom.com/support/bluetooth/update.php

  If a win XP installs drivers will I get a bluetooth icon in the taskbar - BTTray.exe - so that I can pair my cell phone there and use services likethe OBEX file transfer and Object Push.

  Maryse Agarwal

  I did it

  There was a WIDCOMM setup exe in the folder of set point.

  I ran the installation and after I plugged the dongle and installed xp 'Enumerator of Bus Bluetooth' & 'Bluetooth wireless Hub' and bingo I m ready to go.

  Maryse Agarwal

• Running Exchange Server application of hotfixes and service pack to the server mailbox without loss of data during the restore?

  People,

  I would like to know how can I safely ask the Exchange Server service pack or cumulative update for the server role mailbox (no DAG) without loss of e-mail during the downtime and roll back the snapshot?

  If I can do the following:

  1. stop all Exchange Server services.

  2. unplug the vNIC on the mailbox server

  3 take a snapshot of the virtual machine

  4. apply the service Pack of Exchange Server / Cumulative Update or Windows Update

  5 reset

  6 reconnect the vNIC, if the server online with no problem, commit / remove the snapshot, if not, then disconnect the vNIC followed to restore.

  would be - this sense being or support for Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?

  If yu have any other suggestions, please let me know here.

  Thanks in advance.

  Hey AlbertWT,

  I'll start by saying that I would not do.  Microsoft is explicit that snapshots are not supported with Exchange when virtualized.  See below (from Exchange 2013 Virtualization: help Exchange 2013):

  Some hypervisors include features to take snapshots of virtual machines. Virtual machine snapshots capture the State of a virtual machine while it is running. This feature allows you to take several snapshots of a virtual machine and then return the virtual machine to a previous state by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that manages the data of the State, such as Exchange. Accordingly, making snapshots of the virtual machine to a virtual guest computer Exchange only is not supported.

  Even if we ignore the statement of support from shadow copies that isn't always a good idea.  Here are some things to consider.

  (1) cumulative updates for the Exchange to modify the Active Directory schema.  Roll back the snapshot on the mailbox server is not undo changes made to RFA, which could cause functional supported questions.  See this link to give you an idea of how there is pattern AD updates in each CU Exchange and service pack: the Active Directory in Exchange 2013 schema changes: Exchange 2013 help

  (2) it is possible to send to come during the time you test the update, and if you need to restore you would need a plan to retrieve this e-mail.  Third party services may work, or you can prevent the email to come in your environment completely during this period, but these aren't the ideal solutions.

  A much better solution would be to create a lab environment that is isolated from the production.  You can either take clones of your Exchange and AD VMs and put them in a closed network environment, or create a laboratory and import the structure of your ad if it matches the production.  I think it is a much better way to test than to try to rely on stereotypes in production.

  Hope that helps!

  Matt

• Windows digitally errors of signature for the audio drivers, after the restoration of windows 7

  After restoring windows 7 in a laptop asus restore disk of asus assistance, I still had to missing drivers, Wi - Fi and audio. I went to downloadd and site of asus drivers, two drivers, but during the installation I got the error "digital signature failed" and will not install the drivers, help please

  Hi Jorge,.

  What is the model of your Asus system and audio drivers and wireless models? Have you tried to go to the website of the manufacturer of the hardware? (For example, if your wireless card is a card Intel going on their site of drivers)

• Error snapshot VSS «file too small startup...» "during the restore point creating eventlog ID 12289 in Windows 8

  I am unable to do a restore point. There is plenty of space on both partitions.
  Config: A single drive with 2 partitions, one primary and one extended logical partition with Windows 8 on logic in dual boot with Windows 7 on the primary. The restore point creation in Win7 works OK but in Win8 it never worked alhthough all parameters seem to be OK.
  Device configuration:
  DISKPART > select disk 0
  Disk 0 is now the selected disk. NOTE: there is only 1 disc
  DISKPART > list disk
  Disc # status size free Dyn Gpt
  --------  -------------  -------  -------  ---  ---
  * Online drive 0 93 GB 1024 KB
  DISKPART > list volume
  Volume # Ltr Label Fs Type size status Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0 DVD - ROM 0 B G no media
  Volume 1 - D drive of W7 NTFS Partition 54 GB healthy system
  Volume 2 C disc W8 NTFS Partition 39 GB Healthy Boot
  DISKPART > list partition
  Partition # type Offset size
  -------------  ----------------  -------  -------
  Partition 1 primary 54 GB 31 KB
  0 39 extended 54 GB GB partition
  Partition 2 logic 39 GB GB 54
  ---> Note: I do not understand partition 0, there are only two partitions!

  Extract from the event log. Error ID 12289 0 x 80042306:
  The volume shadow copy Service error: unexpected error
  DeviceIoControl (\\?\Volume{6fae1bd1-6bbe-11e2-af9b-806e6f6e6963}
  (- 0000011C, 0x0053c008, 007FB8D0, 0, 007FC8D8, 4096, [0]).  HR = 0 x 80820001,
  The startup file is too small to support persistent snapshots
  Operation:
  Treatment EndPrepareSnapshots
  Context:
  Execution context: System Provider
  ---> NOTE: occurs 4 to 5 times

  Cannot create (process = restore point
  'C:\Windows\system32\systempropertiesprotection.exe ';
  Description is W8 FDC shadow;. Error = 0 x 80042306).
  ---> NOTE: 1 times

  VSS commands: WRITERS, WMI and MSsearch system has failed...
  _________________________________________________________________________
  List writers C:\Windows\System32>vssadmin
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line too
  (C) copyright 2001-2012 Microsoft Corp.

  Author name: 'Task Scheduler Writer'
  The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
  Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
  Status: Stable [1]
  Last error: no error

  Writer name: 'recorder VSS metadata store.
  The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
  Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
  Status: Stable [1]
  Last error: no error

  Writer name: 'Performance Counters writer. "
  The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
  Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
  Status: Stable [1]
  Last error: no error

  The writer's name: "System Writer".
  The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
  Writer Instance Id: {b796dce1-206a-472b-bb86-5417041b341c}
  State: [7] failed
  Last error: Timed out

  Author name: 'ASR Writer.
  The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
  Writer Instance Id: {eaf13613-1a24-44b5-8622-8e691f1fb074}
  Status: Stable [1]
  Last error: no error

  Writer name: 'writer of Service MSSearch.
  The writer ID: {cd3f2362-8bef-46c7-9181-d62844cdc0b2}
  Writer Instance Id: {43272e0e-d81a-4aa5-abe9-f6bbbfa6f3b0}
  State: [7] failed
  Last error: Timed out

  Author name: 'Shadow Copy optimization Writer. "
  The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
  Writer Instance Id: {20038d53-ecd7-4332-b2f5-ad9a5c465220}
  Status: Stable [1]
  Last error: no error

  Name of the author: "COM + REGDB Writer".
  The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
  Writer Instance Id: {bf7bd8e4-5aa8-412a-a401-528d6100203a}
  Status: Stable [1]
  Last error: no error

  Author name: 'Registry Writer'
  The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
  Writer Instance Id: {77018269-1865-4b89-b810-e4a9b6a3b5ab}
  Status: Stable [1]
  Last error: no error

  Author name: 'BIT Writer'
  The writer ID: {4969d978-be47-48b0-b100-f328f07ac1e0}
  Writer Instance Id: {6a7abc2b-e868-45cb-be06-f63e19fb1510}
  Status: Stable [1]
  Last error: no error

  Author name: 'WMI Writer'
  The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
  Writer Instance Id: {848fabfd-fc83-4c67-ba79-92b274dab8eb}
  State: [7] failed
  Last error: Timed out
  _________________________________________________________________
  Mountvol

  C:\Windows\System32>mountvol
  Creates, deletes, or lists a volume mount point.

  The possible values for VolumeName along with current mount points are:

  \\?\Volume{6fae1bd0-6bbe-11E2-AF9B-806e6f6e6963}\
  D:\

  \\?\Volume{6fae1bd1-6bbe-11E2-AF9B-806e6f6e6963}\
  C:\

  \\?\Volume{6fae1bd6-6bbe-11E2-AF9B-806e6f6e6963}\
  G:\
  ----------------------------------------------
  Lists of C:\Windows\System32>vssadmin providers
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
  (C) copyright 2001-2012 Microsoft Corp.
  The provider name: 'Microsoft Software Shadow Copy provider 1.0 '
  Provider type: System
  Provider ID: {b5946137-7b9f-4925-af80-51abd60b20d5}
  Version: 1.0.0.7
  _____________________________________________________________________

  C:\Windows\System32>vssadmin list shadowstorage
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
  (C) copyright 2001-2012 Microsoft Corp.

  Shadow copy storage association
  Volume: (D :) \\?\Volume {6fae1bd0-6bbe-11e2-af9b-806e6f6e6963} \)
  Shadow copy storage volume: (D :) \\?\Volume {6fae1bd0-6bbe-11e2-af9b-806e6f6e6963} \)
  Memory copy ghost used space: 0 bytes (0%)
  Storage space copy allocated Shadow: 0 bytes (0%)
  Maximum space memory copy Ghost: 3.78 GB (7%)

  Shadow copy storage association
  Volume: (c) \\?\Volume {6fae1bd1-6bbe-11e2-af9b-806e6f6e6963}.
  Shadow copy storage volume: (c) \\?\Volume {6fae1bd1-6bbe-11e2-af9b-806e6f6e6963}.
  Memory copy ghost used space: 0 bytes (0%)
  Storage space copy allocated Shadow: 0 bytes (0%)
  Maximum space memory copy Ghost: 3.13 GB (8%)
  ---------------------------------------------------------------------

  Material:
  _________
  Computer brand name: Hewlett - Packard HP Pavilion dv6000 (RG892EA #UUG)
  Operating system: Microsoft Windows 8 Professional build 9200
  Processor: AMD Turion64 X 2 TL - 50 (1600,0 MHz)
  Motherboard: Quanta 30B 8 (nVidia GeForce Go 6100 (C51MV) + MCP51)
  Memory: 2 GB (dual channel)
  Hard drive: FUJITSU MHV2100BH (95 396 MB (100 GB))
  Optical drive: HL-DT-ST DVDRAM GSA - 4084N (DVD + R DL)
  Graphics card: nVidia GeForce Go 7200 [HP]

  Hard drive
  --------------------------------------
  Drive model: FUJITSU MHV2100BH
  Variable speed drive: SATA 1.5 Gb/s
  Drive serial number: NW12T662BYPM
  Firmware revision: 892C
  Disk capacity: 95 396 MB (100 GB)

  Hi Francis,.

  Thanks for posting the query on the Microsoft Community Forum.

  From the description, it seems that the error revceive you associated with VSS snapshot.

  1. What security software is installed on the computer?
  2. Do you have any third-party backup program installed on the computer?

  To begin troubleshooting, I would suggest that you do Check Disk

  • Press Windows key + R
  • Type "cmd" to open the command prompt.
  • Type Chkdsk/r , and press enter.

  Note:

  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  Reply with more information about the issue so that we can help you further.

  I had the same problem with a HP dv5000 has an Intel Dual Core processor, after installed the 10 Pro Update window cleaning, after the update sent by Windows Update Service left me with this problem.

  Thank you post I did check in the menu properties C: Tools.

  After that, I was able to create a Restore Point.

  Thank you very much for your message.

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• If the third party amendment by the authorized service center which is then liable to a client in good faith?

  Dear Sir/Madam,

  I'm an avid user of your iphone device 6 more, I bought my iphone 6 more 64 GB on aug-2015 but I just use this device only for a month and the rest of the time machine is with the service center or a lot of problem. I bought the iphone as a better phone in my life, but since the day I bought this phone I have faced the problem and until today, I had a same problem. For this problem, I called your service the customer more than 100 times and I visited your center customer service more than 10 times, including 7 times, they supported my phone without even looking at what the problem is all about, and 3 times, they have just updated the software of the phone and return to me , on January 15, 2016 when I presented my iphone with kamla nagar service center, they had my phone with them for a week and after a week they just gave my phone back by saying simply that there was a software problem that is updated by our care. 28 January 2016 again I need the visit to your service center of kamla nagar for the same question and they are with themselves for 2 week and after that they called and said that on device rear panel is pregnant by third party do, thereafter for 2 weeks, I presented my phone with the PSN Service Center and they said that your phone is already open by third party.

  I bought this phone because of its good will and after-sales service, but after seeing so many obstacles in first 6 months of the purchase I would please mention its my humble request to pay my money back because now somewhere down the line I would prefer not to use any Apple product and I probably make sure that none of my friends use it either. And Apple is such a renowned brand, I'm sure they won't be happy to see themselves in the Court of the consumer.

  Make sure that the worksheet

  You do not discuss Apple here. It is a forum for technical support to the user. Is this service center you mention an Apple authorized Service provider, or is it a real Apple Store? If it's an Apple authorized service provider, then you will need to start your question with them. If you want to try to contact Apple, you can use this support document to see if there is a number that you can use in your area. Contact Apple for support and service - Apple Support

• Sign third-party LDAP in the Profile Manager

  Hello

  We have implemented the LDAP authentication against our OpenLDAP Ubuntu Server that works very well for all services except the Profile Manager. I can't see groups or users in the web UI of PM. Connection under server.local/mydevices does not work too.

  The paper says 'missing externalID' oder '[user] not found' when a ldap user tries to connect to mydevices.

  Unfortunately it does not help:

  OS X Server: the use of the Profile Manager or Wiki with Active Directory service or third-party LDAP services - Apple Suppor...

  I appreciate your help.

  Thank you

  OSX Server on El Capitan 10.11.2 5.0.15

  is there someone who can help me with this?

  Thank you!

• He can't save images/files DVD and CD__Do I need a "third party" to do the job properly?

  Hello:

  XP with SP3

  For the past few weeks, I tried to save Photoes and files in DVD - R or a CD, but I get message 'error' whenever I try to save,... error message popping up in the middle of the screen,... "there are some problems or similar phrases with his background, 'Retry', ' jump, and 'Cancel'."

  My question is;

  How to save photoes and files in DVD - R or a CD successfully?  This is XP/SP3.

  Do I need to buy a third-party to record these photoes and folders?

  Thanks for any help on this, above.

  Hello:

  XP with SP3

  For the past few weeks, I tried to save Photoes and files in DVD - R or a CD, but I get message 'error' whenever I try to save,... error message popping up in the middle of the screen,... "there are some problems or similar phrases with his background, 'Retry', ' jump, and 'Cancel'."

  My question is;

  How to save photoes and files in DVD - R or a CD successfully?  This is XP/SP3.

  Do I need to buy a third-party to record these photoes and folders?

  Thanks for any help on this, above.

  Hi, I use picasa3 to store, view and difficulty and save photos on dvd free etc.its.

• Laptop stuck closed during the restoration of the system

  Laptop is stuck during the system restore? If I turn off computer manually by pressing the power button / stop it will mess up computer?  How can I fix it? The display shows 'Shutting Down' he was slaughtered like that for 2 hours now. Help, please?

  It is likely mean restoration of the system has failed for any reason any and therefore find it difficult to restart because of this.

  You may want to wait for someone a little more expert than me but normally peak I power the laptop through the main switch off and restart it.  At the start of the computer laptop once again he can ask you to start windows normally or in safe mode and you can then happily that we restart the PC and the system of cancellation/restore again.

• Update failed during the restoration of Win10 for Win7

  Hello

  There was a update failed while he was in the process of restore. Once the process is finished, I noticed that, so I clicked on "Install updates". Which also failed.

  I've never met update of the issues before the restore Win10 to Win7.

  Name of the update problem :

  -Microsoft .NET Framework 4.6.1 for Windows 7 for x 64 (KB3102433)

  Type of computer / OS :

  -Hewlett-Packard desktop computer bought in 2011, AMD Athlon (TM) II X 4 955 processor 3.20 GHz, 8.00 GB of RAM

  -Windows 7 Home Premium (preinstalled at the factory), Service Pack 1, 64-bit

  Antivirus applications installed before the upgrade and at a Win10; those after cancellation for Win7 :

  -Windows Defender (off)

  -Malwarebytes Anti-Malware free (do not prompt for reinstallation, update to Win10, have not opened since rollback)

  -AVG AntiVirus Free (relocation for upgrade to upgrade to Win10 successful, reinstall to update to Win7 after restoration, failure)

  Previous programs anti-virus installed / uninstalled :

  -factory pre-installed Norton Internet Security 2011 (60-day trial subscription). Uninstalled in 2011.

  -ISP provided security: Shaw Secure powered by F-Secure. Uninstalled in 2012.

  These are in the downloads folder (but I don't know more what/why and can't tell if they are installed programs or not) :

  -Windows-KB890830 - x 64 - V5.20.exe: Microsoft Windows Malicious Software Removal Tool, version 5.20.11000

  -msert.exe: no details of properties (no version, no digital signature, etc.), but I think that it is supposed to be the Microsoft Safety Scanner

  -windows-kb890830 - v3.21.exe: Microsoft Windows Malicious Software Removal Tool, version 3.21.5103.0

  -NPE.exe: Norton Power Eraser, version 2.0.0.52 the file, version 2.0 product, year 2011

  Latest updates successfully and the repetition does not install of KB3102433 :

  

  Error codes for KB3102433:

  -26/08/2016: 80200001

  -29/08/2016: 13EC

  -03/09/2016: 643

  -03/09/2016: 643

  Measures taken and the results:

  1) has no installation by the restore process: (KB3102433), 80200001 Code

  -revealed by timestamp in the update history

  (2) Windows Update interface: 1 important update available (KB3102433)

  -Click on install updates

  Result (s):

  -Failed / update history does not record the event

  3) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error during installation"

  -Updated story does not connect me

  (4) download and run the Windows 7 update (wu10.diagcab) troubleshooting tool

  Result (s):

  -Popup: An error occurred when troubleshooting: a problem is preventing start the troubleshooter.

  Identifier of the package: WindowsUpdateDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: (me, user Admin account)

  Context: restricted

  (5) run the System File Checker tool

  Result (s):

  

  (6) Windows Update interface: 1 important update available; KB3102433

  -Click on install updates

  Result (s):

  -This time the story recorded event update:

  Installation date: 29/08/2016

  Installation status: failed

  Error details: Code 13EC

  (7) download and run other troubleshooting of Windows 7 update (WindowsUpdateDiagnostic.diagcab)

  Result (s):

  -He scored a few points set except one:

  -"" Problems: Windows Update, error 0 x 80070057 do not set ""

  -This stage caused the update Interface to turn red on the theme and lose all it's information. such as:

  -1 important update available / 8 optional updates available <> before - now -online NO update available

  -Final check of updates: front: 29/07/2016 - now: never

  -Updates have been installed: front: 22/07/2016 - now: never

  -"Install updates" button "Check for updates" has disappeared, replaced by

  8) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error when installing... See log file»

  -Updated history do not log the event

  

  (9) click on ' Check for updates ' hopefully bring "updates available".

  Result (s):

  -He kept checking for about 2 hours without change

  -I didn't know how to cancel the verification process, then...

  (10)... Computer restarts

  Result (s):

  -updates stops

  -Updated Interface:

  -Does not display available updates

  -Final check of updates: never

  -Updates have been installed: never

  * 3 days later, without getting any change, it automatically installed 9 updates successfully. Now, the update Interface is once again changed. "Show all available updates" option appears, horodateurs, replacing '' never. ''

  (11) select problem update (KB3102433), and then click on install

  Result (s):

  -A failed; Error Code 643

  -Click on 'Try' again: same results

  Any help would be greatly appreciated.

  Thank you

  Proceed as follows: Set "Never search updates" automatic updates, restart, and try again.

  Best regards, VZ :)