input/output error 0x8007045D

Similar Questions

• Mathematical functions with input/output error

  Please refer to the attached picture. Where do you find these mathematical functions with input/output error? I saw these in response to a message.

  I think they appear when you connect a waveform or dynamic data type.  Since I rarely use these data types (just give the table!), I'm not positive.

  Lynn

• Ghetto VCB / Input/output error (327689)

  Hi all!

  I set up the ghetto of VCB backup script to our ESXi 3.5 servers.

  The way backup target is a Starwind iSCSI connected as a data store. With the data browser I can create and delete its file without problem.

  but when I try to run the script he replys error:

  Impossible to clone the drive: input/output error (327689)

  I have no idea what this could be. A google search gave me an indication which is something with vkmfs tools.

  But the really Wired is the first 5 time of the backup, run smothly thrue...

  Does anyone have a hint for me how to solve this problem?

  Regars @all

  • Alex

  Please take a look at this VMware KB: http://kb.vmware.com/kb/2116375 for the reply

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• RMAN > backup of level 0 > ORA-27072: file IO error... Input/output error

  Hi, all.
  
  I get the following error messages when executing a level 0 backup. Please help!
  
  ====================================================================================================
  RMAN-03009: failure of the backup command on the channel of d1 at 2008-11-17 01:08:34
  ORA-19502: write error on file ' / NEW_backups/backups/admin/CCPROD/bkups/CCPROD.5313.1.670986008.DB ', blockno 82945 (blocksize = 8192)
  ORA-27072: IO file error
  Linux-x86_64 error: 5: input/output error
  RMAN-03009: failure of the backup command on the channel of d2 at 2008-11-17 01:08:34
  ORA-19502: write error on file ' / NEW_backups/backups/admin/CCPROD/bkups/CCPROD.5314.1.670986008.DB ', blockno 84609 (blocksize = 8192)
  ORA-27072: IO file error
  Linux-x86_64 error: 5: input/output error
  Additional information: 4
  Additional information: 84609
  Additional information:-1
  D2 disabled channel, job failed on it will run on another channel
  output channel: d1
  output channel: d2
  output channel: d3
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on the channel of d3 to 2008-11-17 01:08:34
  ORA-19502: write error on file ' / NEW_backups/backups/admin/CCPROD/bkups/CCPROD.5315.1.670986008.DB ', blockno 98433 (blocksize = 8192)
  ORA-27072: IO file error
  Linux-x86_64 error: 5: input/output error
  Additional information: 4
  Additional information: 98433
  Additional information:-1

  Since this is a clerical error, I look at the permissions on the target directory and available disk space on the target file system.

• Error input/output of the VMFS5 local data store

  Hello

  I have 3 locally on the hard drive on my server from IBM. 1 250 GB drive, I used to create the data store Linux (datastore1) and other 2 disks that I created the Windows data store (datastore2)

  Couple of VMS is deployed on the two databases. Over the weekend, suddenly vms Windows Data Store (datastore2) went down. When I checked Monday concluded that data store is visible to ESXi host but I am unable to navigate to virtual machines.

  If I Directory VM cd I get below error:

  ~ # cd/vmfs/volumes/Windows\ Data\ store/Win - 2 k 8-2.

  SH: getcwd: input/output error

  # (unknown)

  ~ # esxcfg - scsidevs - l

  MPX.vmhba32:C0:t0:l0

  Device type: Direct access

  Size: MB 1911

  Full name: USB Direct-access Local (mpx.vmhba32:C0:T0:L0)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/mpx.vmhba32:C0:T0:L0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba32:C0:T0:L0

  Seller: SMART model: USB - IBM Revis: 0000

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: true

  Is Local: true is SSD: false

  Other names:

  VML.0000000000766d68626133323a303a30

  VAAI status: unsupported

  MPX.vmhba33:C0:t0:l0

  Device type: CD-ROM

  Size: 0 MB

  Full name: Local USB CD-ROM (mpx.vmhba33:C0:T0:L0)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/cdrom/mpx.vmhba33:C0:T0:L0

  Devfs Path: /vmfs/devices/cdrom/mpx.vmhba33:C0:T0:L0

  Seller: KVM model: vmDisk-CD live again: 0.01

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: true

  Is Local: true is SSD: false

  Other names:

  VML.0005000000766d68626133333a303a30

  VAAI status: unsupported

  NAA.5000c500478aee93

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478aee93)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478aee93

  Devfs Path: /vmfs/devices/disks/naa.5000c500478aee93

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478aee93535439333030

  VAAI status: unknown

  NAA.5000c500478b8d3b

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478b8d3b)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478b8d3b

  Devfs Path: /vmfs/devices/disks/naa.5000c500478b8d3b

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478b8d3b535439333030

  VAAI status: unknown

  NAA.5000c500478d724f

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478d724f)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478d724f

  Devfs Path: /vmfs/devices/disks/naa.5000c500478d724f

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478d724f535439333030

  VAAI status: unknown

  ~ # esxcfg - scsidevs - m

  NAA.5000c500478d724f:1 /vmfs/devices/disks/naa.5000c500478d724f:1 4f83af28-52abeaf2-6475-5cf3fcba46f2 0 Linux Data Store

  NAA.5000c500478b8d3b:3 /vmfs/devices/disks/naa.5000c500478b8d3b:3 4f7cfc39-4d17993a-a08c-5cf3fcba46f2 0 Windows Data Store

  Data store of Windows NAA.5000c500478aee93:1 /vmfs/devices/disks/naa.5000c500478aee93:1 4f7cfc39-4d17993a-a08c-5cf3fcba46f2 1

  Here is the output of dmesg: I suspect to be a hard drive problem

  (2014 06-16 T 10: 46:25.385Z cpu5:382346) WARNING: UserObj: 675: could not crossdup fd 8, / dev/ptyp0 CHAR type: busy

  (2014 06-16 T 10: 46:25.385Z cpu5:382346) WARNING: UserObj: 675: could not crossdup fd 10, / dev/ptyp0 CHAR type: busy

  (2014 06-16 T 10: 46:25.385Z cpu2:382348) WARNING: UserLinux: 1340: unsupported: (void)

  (2014 06-16 T 10: 46:52.510Z cpu16:4112) NMP: nmp_ThrottleLogForDevice:2318: Cmd 0 x 28 (0x412440db9c40) to dev 'naa.5000c500478b8d3b' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0x4 0x32 0x0. Bill: NO

  (2014 06-16 T 10: 46:52.510Z cpu16:4112) ScsiDeviceIO: 2316: Cmd (0x412440db9c40) 0 x 28, CmdSN 0x2a to dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  (2014 06-16 T 10: 47:34.631Z cpu18:4114) NMP: nmp_ThrottleLogForDevice:2318: Cmd 0 x 28 (0 x 412441635000) to dev 'naa.5000c500478b8d3b' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0x4 0x32 0x0. Bill: NO

  (2014 06-16 T 10: 47:34.631Z cpu18:4114) ScsiDeviceIO: 2316: Cmd (0 x 412441635000) 0 x 28, CmdSN 0x1c to dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  (2014 06-16 T 10: 47:41.476Z cpu18:4114) ScsiDeviceIO: 2316: Cmd (0x412440da3500) 0 x 28, CmdSN 0 x 21-dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  Please guide me to solve this problem. Thank you all in advance

  /virtu4

  This problem is solved.

  Thanks to the communities for not responding, that made me to fix this myself

  /virt4

• How to upgrade output during input/output synchronized?

  Hello

  We use an input/output series card m PCI-6289 to provide participants sound while recording the EEG.

  Our inputs and outputs are synchronized using the diagram that is attached.

  To date our output audio segments have been relatively short. However, now we want to output sounds which last a long time. I've run into shortages of memory by using the current diagram.

  Could someone suggest how I could update the audio output, regularly with pieces short 1 sec, in the loop in the diagram attached?

  I tried to move the DAQmx Write.vi (point 4 on the diagram) inside the loop, but the output signal was not correct.

  Thank you very much for your advice!

  Frenk

  Hi Frenk,

  Can you be more specific about the error that you are experiencing?

  Have you heard of the regeneration of analog output? It can be used with a property DAQmx writing node.

  Regeneration is the repetition of the data already in the buffer. Standard regeneration is when the PC buffer data are continually downloaded on the FIFO to write. If the data buffer is smaller than the size of the FIFO, it is copied as many times as possible in the FIFO before the start of the generation. This is done to reduce the risk of errors of bandwidth by transferring is not the new data down to the FIFO fairly quickly. Once started, the generation of the copies of the data are no longer manufactured to fill the buffer. New data can be written in the buffer of PC at any time without interrupting the output.

  You can also use the FIFO regeneration. With regeneration of the FIFO, the entire buffer is downloaded on the FIFO and regenerated from there. Once the data is uploaded, new data cannot be written to the FIFO. To use the FIFO regeneration, the whole buffer must fit within the size of the FIFO. The advantage of using the FIFO regeneration is that it requires no communication with memory primary host after the operation started, thus avoiding any problems that arise due to the excessive movement of buses.

  Take a look at this link which travels with the regeneration: http://www.ni.com/product-documentation/3874/en/

• Portege 3490CT - inputs/outputs

  I have a problem caused by drivers being removed from the machine according to me. I can't input/output using the external remote diskette, CD Rom, or USB port.

  How can I install new drivers without internet access?

  Hi Thom,

  If you have isolated your notebook all your i/o devices, your only way to restore access will restore your full operating system of your recovery disks.

  However, before I do something drastic, that you can try to start in safe mode to see if this will allow you to access your external devices, or you can try to restore your system to a previous restore point (assuming you are using XP) before your drivers has been removed.

  HTH

• Focusrite scarlett 2i4 unable to use as audio input/output device

  I just bought a Scarlett 2i4 hoping that time would have been solved compatibility problems. However, I'm unable to use it as an input/output device. Site Web Focus rite has a class compatible mode download that is supposed to solve this problem. And I installed it three times without success. Has anyone else had this problem and found a workaround. Thank you! I have a macbook pro mid 2012, el capitan 10.11.3.

  Don't know if this will help.

  I have a 2i2. When I got it, a few BONES in there, I couldn't make it work. I went back and forth with tech support Scarlett. They really tried, even sent several beta drivers. Nothing works.

  Then I uninstalled all the software of Scarlett and restarted - and it works.

• Satellite L550 - 1 8: error 0X8007045D code and code error 24-380136-00000000

  I have a new Toshiba L550 8 1 computer with Windows 7 64 bit.

  The problem is that I can t burn my files on my DVD PIONEER DVD - RW DVRTD09A preinstalled!

  If I right click on the file and choose send to E:DVD - I got the error 0X8007045D drive code.

  If I use the preinstalled Toshiba Disc Creator, I got the error code 380136-24-00000000.

  What s wrong.

  OLE.

  Hello

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  also, try to use high quality like Verbatim and tdk media. Some cd/dvd rom will not burn, weak brand, media.

• Lack of analog input/output range

  Hello!

  I LV 8.6 installed on my PC with XP OS and my card is 6024E. I noticed that the analog input/output palette is not appearing or missing. I tried searching but no luck. NOR-Daq traditional 7.4.4 currently installed.

  Try reinstalling the device driver CD/DVD and make sure you have selected traditional DAQ.

  Say you you installed NOR-DAQ 7.4.4.  But if it was made before you install LabVIEW, LabVIEW and then see.

• OR 9403: Digital Input/Output slows timed loop?

  Hi all

  I use a loop timed sample of 7 current channels (NI 9023), 3-channel (NI 9025) voltage at 1000 Hz in scan mode and it works fine. However, when I add for 8 output channels of the input/output module digital module NI 9403 for timed loop, CAPAS sampling cannot exceed 1000 Hz. According with time stamp data I wroten in file, it seems that I have in all ten milliseconds, I missed a miliseconds.

  I would like to ask is there a reason for this? The digital I/o module affect the timed loop?

  Thank you much in advance.

  I'm not familiar with the FPGA code, so I can't comment there.  However, I noticed that you call writing to text file twice in the timed loop.  Can you only collect data and then write the files after the time loop?  This would save a lot of time.  For each entry, the program needs to access the hard disk, find the end of the file, add him and return to write on the hard drive.  A lot of your time, especially since the files are getting bigger.

• Configuration of the inputs/outputs of NI9401 in labview FPGA

  Hello

  I am very new to Labview FPGA. In fact, I'm implementing the very first example introduced by OR for learning Labview FPGA. I need to connect an entry of a NI9401 on one exit from the other.

  However, when I drag and drop the input/output units, the two act as inputs:

  

  I also changed the propties one of the NI9401 to act as output. But the problem persists.

  

  It is the example that I am building.

  I'd appreciate any suggestions.

  https://www.YouTube.com/watch?v=mv112V-P030&index=1&list=PLbCk9hRe-ziECXQjE--fN29C_kcx7CHnA

  Right-click on the output node, and then select "change to write."

• Error 0x8007045D when copying files from computer to external hard drive

  I am trying to copy some files from my drive HARD outside., but I get this error (error 0x8007045D: the request could not be performed because of an i/o device error).

  I run windows check disk on my external hard drive, I tried to run windows defrag, but it takes too Lowe and cancel (external HARD disk is 1 TB). I download a software defrag and defragmented my hard drive using fast (the software is O & O Defrag). I tried on another computer and got the same error. Is it a hardware problem. Y at - there any possibility to fix it. Thank you for helping

  Hello Nyfixen,

  1. have you changed the permission for the external hard drive or files you are trying to copy?

  2. you have all important data (files) stored on the external hard drive?

  3. are you able to copy the external hard drive to the computer?

  The Autorun.inf could not be a problem for that. It always seems to be a problem of permission for me. Some hard drives have a jumper on them for write protection. You should check the configuration of jumpers, thank you consult the manual that came with the hard drive for permissions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-know-before-applying-permissions-to-a-file-or-folder

  Format hard drive:

  Read this article for more information on this:

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x8007045D

  I'm trying to delete files on my USB, but all I get is this error message.

  Oddly I don't understand on the laptop itself when I'm either remove, copy or adding files then why is what is happening with the flash player?

  Hello

  Follow the steps by Gokul T

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-0x8007045d-the-request-could-not-be/17d085c8-BAB4-4d31-9a2b-e7a4ba38d387

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.