Insane AVCHD (.mts) problems after CC 7.1.0 update

Similar Questions

• is there an easy way to comply (AVCHD) .mts files after editing?

  I made a mount and I would like to send an xml at will, but I just noticed that solve nog play .mts files...

  It would be useful to get somehow only edited shots to the right timecode even in my calendar, but with a different format such as prores.

  1. use the prelude to transcode the original media in a friendly format Resolve.  Keep the same clip names.

  2. with Premiere Pro closed, rename or move the folder with the original media.

  3. When you reopen the project, PP will ask where are the media.  Point to the new files.

  4. export your XML file from there.

• Outlook 2007 POP3 problems after the installation of security updates

  After the updates of security for December 2010 has been installed on my computer, my Gmail POP3 does not. My access code are rejected.

  The i uninstall KB2288953 and after this operation bit is working again.

  See...

  • Microsoft Outlook 2007 may have problems to send/receive or performance after a recent update has been installed on the computer (17 Dec-10)
    http://support.Microsoft.com/kb/2485531

• Sony Xperia P has battery problem after 4.1.2. Update

  This morning I updated my Sony Xperia P to 4.1.2 Jelly Bean. The update itself was completed without problems.

  But after the update used battery very fast, without being used. And it's hot.

  I tried to reboot (several times) does not.

  When we look at the use of the battery, it says my Exchange (build-in app email) is constantly active and is the main reason for my use of the large farm. I tried to change my sync to push manual, without significant difference.

  I activated the ENDURANCE (why isn't this by default?). In doing so, it tells me I have the long lag time, but it still really drains my battery...

  This afternoon I used about 50% battery in 2 hours, without the use of mobile telephony.

  Finally, I forced the app Exchange stops, which effectively stopped the battery drain.

  But it seems to me like incompatibility or similar between Jelly Bean and the application of the Exchange.

  Anyone who has had, or has ideas for what?

  Hello

  Well, I made some progress with it. The "Exchange" Service unused by my outlook e-mail reader but by the mail client by default when you access my Hotmail account. It seems to keep the phone in a continuous "awake" State which will obviously flow fast enough (tiny) battery.

  The solution is to remove the Hotmail account, and then reconfigure. I also took the opportunity to try another customer, but I don't think that makes the difference. The Exchange Service must return to its normal use and you should also see the phone not being is not in the State 'awake' all the time. This is visible in the form of advanced battery via the power management menu.

  See you soon,.

  Jon

• Problem after installing winsow 8.1 update

  After installation of window 8.1 - updated Hp and have 3 update iussues

  Card reader Raltek map

  Realtek LAN driver (LAN)

  Realtek Lan Driver for Microsoft Windows

  I'm cL hane 15-e037 HP Pavilion Notebook PC

  Product number: E8820UA

  Serial number: [personal information]

  Hello

  Try to install the following.

  Realtek LAN Driver.

  Realtek card reader driver.

  If you also need the wireless driver, try the following:

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63317.exe

  Kind regards

  DP - K

• Problems after last-vista windows security update

  I have problems with the network I am on.  It has to do with stay connected. Every time I have to install or update a program - I get starts off it says unable to connect with the dns server. The message is 'reset NIC '.  I seem to be alone in my apartment with this complex problem.

  Selig,

  See if this article helps not at all

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• Sculpture of filter automation problems after put 10.2.1 update?

  Since I've updated, I can't find the filter cutoff or controls resonance in the list of options selectable automation more. I have a track I worked on where I got "Morphpnt 0 filter Cutoff" control the filter cut on the sculpture, but now, even in the same project, that option is not available to select in the list of automation. It seems to me that the option is missing from the list since the update, but maybe I'm wrong, and I'm looking in the wrong place. Any help would be appreciated.

  In virtue of which the Automation subcategory have this setting allows to reside?

  I remember a particular where my question that you're right, I can't locate less 10.2... but I think it's a bug, error or perhaps a change of design for reasons unclear.

  However, there is a clue...

  In the smart controls... When you go to the Non automatable section... (this is why it seems to have been deleted or excluded from the list of normal Automation) it lists filter Cutoff for the Sculpture, but you can select it and then save automation using the assigned smart command...

  

  

• Problems after installing KB978338 on Windows Vista SP2

  I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.

  System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.

  I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.

  Please tell us how can I still troubleshoot or solve this problem.

  Thanks in advance.

  JohnBrown

  Halifax, NS

  So I "hid" the update and you call this one closed without resolution.

  While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.

  Repost:

  See the section "How to get help" of http://support.microsoft.com/kb/978338

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Transcode. AVCHD MTS for use in PP CS3

  Question a bit strange but here goes.

  I have a number of. AVCHD MTS files I want to change in PP CS3 on my work computer. The files are mainly 1920 x 1080 50i but is 1440 x 1080 50i, all with Audio A52 (akaAC3) (a52): I didn't check!

  CS3 allows me to import in this format, so I need to transcode the files, maintaining a maximum quality. Unfortunately, a cash strapped student so I cannot afford to buy a professional transcoding software. I can, however, install a trial PP CS 5.5 on my computer at home and use that if it works well, then replace the files video to work (my work computer only runs win XP. Vista or 7 are system requirements and prevent installation of CS 5.5).

  Essentially, what is the best free way to transcode these files and what format they should go to? Test on my computer desk or other freeware CS5.5? I have been searching around the forum and the web although but can not find a lot of useful answers which contradict each other.

  See you soon

  Nick

  Most converters will do a horrible job and convert in a still difficult to change format.

  Don't size your money on AVCHD MECHANISM (as shown in the connection of John).

  Best thing and I just not free is Cineform.

  It will give you Visual lossless images, easy to edit.

  Download the trial version.

  If it's one thing when only to convert all your videos in the trial period.

  After that, you need only the neoplayer of Cineform (download) to edit in first. You cannot export of Cineform, but this isn't a problem.

  There are many other formats.

  Do not install the ac3 codec first (just the file .dll at first to adapt won't) otherwise you will not be able to convert files with Cineform.

• Chronology of Lag with AVCHD (MTS) files

  We have been editing with AVCHD MTS files for years without any problems.  In the last week we have timeline lag when editing.  When the timeline scrub the video pauses for 30 seconds before starting again.  He's playing very well until you stop it.  Move to another part of the timeline and you sit and wait.

  We test and all passed: processor, hard drive, RAM, video card

  System:

  Windows 10

  OS & software on SSD, media on separate disk

  CPU Intel I7 4930K

  T.I. card video GeForce GTX 780

  32 GB OF RAM

  Hello

  Please go to Edit Menu of Premiere Pro > Preferences > Media and uncheck the option "Enable accelerated h.264 decoding Intel."

  Once done restart Premiere Pro and check the performance.

  Vinay

• Huge problems after updateing to 31.1.2

  Hello

  I encountered several problems after the update to 31.1.2.

  1. I can't send emails from one of my accounts, or it only downloads the messages from this account. When I connect to this account's web e-mail messages are there. When I try to send the mail, I get the message:

  The message send failed.
  The message could not be sent using SMTP server mail.vista - consulting.hr for some unknown reason. Please check that your SMTP server settings are correct and try again or contact your network administrator.

  I have control over the mail server and reflected on the Messaging log and it said:

  2 Oct 17:08:37 droplet postfix/smtpd [10916]: connect from unknown [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: lost connection after unknown STARTTLS [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: disconnect from unknown [xxx.xxx.xxx.xxx]

  When I try to send mail.

  2. the update of enigmail and ligntening had stuck somhow. In the Add-ons Manager window, I see the old versions and new (lightning 2.6.3 and 3.3.1 enigmail 1.6 and 1.7.2). However, the new versions has dimmed. Restaring Thunderbrid does not help.

  3. all my entries in the missing calendar which is a very big problem for me.

  Best regards

  Andrija

  Close Thunderbird and go to your profile folder.
  There is a subfolder "extensions".
  Find the folder for both the lightning and Enigmail under "extensions" and delete them.

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• problems after the automatic updates

  I have Pavilion g7-2235dx with Windows 8.1 operating system. Almost all automatic up-to-date mess to the top of my ability to get on the internet. The only way I can connect is to uninstall all updates. The icons on my desktop has also stopped working. When I click it, it will immediately on the desktop. Cannot pin them to the taskbar either. Those on the taskbar does not open by clicking on them either. Have to click straight and say to open. Also problem get my Norton antivirus to open. Says it works but can not open it.

  Hello
  
  It might be, the upgrade to Windows 8.1. I've seen people with complications get the upgrade to go "smoothly".
  
  You can try, do a system update that would take you back to Windows 8. See if you have the same problems after updates.
  
  If you choose to update again, make sure that everything is already successfully updated.

• TFncKy.exe problem after upgrade to XP SP3 on Satellite A200

  Hello

  After upgrade of XP SP3, I have problem with TFncky.

  _System_:
  A200/PSAE7
  -XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)

  _Problem_:
  After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:

  + AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
  + ModVer: 5.1.2600.5512 Offset: 00012ace +.

  With one of the following keys on keyboard always results in above described error pop up but key are functional:
  WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.

  My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.

  As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.

  BTW:
  What driver package includes "tfncky.exe? Toshiba controls?

  Thanks in advance for any information or advice for this problem!

  Best regards
  Andreas

  Hello

  the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082

  The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.

  In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.

  See you soon

• I'm having problems after the restart with docking station, applications, etc.

  OS X: 10.11.3

  Mac Pro 2010 2 x 2, 66 GHz 6-Core

  Graphics NVIDIA Quadro 4000 card

  24 GB Ram

  50 GB of free memory

  4 additional hard disks

  Hello community,

  I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.

  Help, please.

  Lars

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.