Inside the VM, determine if it is ESX or workstation

Similar Questions

• PIX501 customer VPN - cannot access inside the network with VPN Session

  What follows is based on the config on the attached link:

  http://www.Cisco.com/en/us/Partner/Tech/tk583/TK372/technologies_configuration_example09186a008009442e.shtml

  PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC

  We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.

  Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!

  We have the same problem with the customer 4.0.3(c)

  Thanks in advance for any help!

  =======================================

  AKCPIX00 # sh run

  : Saved

  :

  6.2 (3) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  hostname AKCPIX00

  domain.com domain name

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  fixup protocol sip udp 5060

  names of

  access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

  pager lines 24

  interface ethernet0 10baset

  interface ethernet1 10full

  Outside 1500 MTU

  Within 1500 MTU

  external IP address #. #. #. # 255.255.240.0

  IP address inside 192.168.1.5 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool akcpool 10.0.0.1 - 10.0.0.10

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address akcpool pool akcgroup

  vpngroup dns 192.168.1.10 Server akcgroup

  vpngroup akcgroup by default-domain domain.com

  vpngroup split tunnel 101 akcgroup

  vpngroup idle 1800 akcgroup-time

  vpngroup password akcgroup *.

  vpngroup idle 1800 akc-time

  Telnet timeout 5

  SSH #. #. #. # 255.255.255.255 outside

  SSH timeout 15

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd dns 192.168.1.10

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:XXXXX

  : end

  AKCPIX00 #.

  Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:

  mymap outside crypto map interface

  ISAKMP allows outside

  Enter these two commands should be enough to reset the ipsec and isakmp.

• Run the script inside the virtual machine the user when the user connects or reconnects

  Hello

  is it possible to detect the user that the user has connected or reconnected to his office inside the virtual machine and run a script?

  It is also possible within the VM user to determine if the user is connected and how long?

  One way to do this is via the following powershell command, but this only works if the user is connected through PCoIP Protocol.

  Get-WmiObject-class Win32_PerfRawData_TeradiciPerf_PCoIPSessionGeneralStatistics - SessionDurationSeconds property

  Best regards

  > it is possible to detect the user that the user has connected either reconnected to his office inside the virtual machine and run a script?

  You can run scripts as user on login and reconnect, this has been a feature since 3.0. See running commands on the desktop view.

  > It is possible inside the VM user to determine if the user is connected and how long?

  I don't think that we expose, but you should be able to query Windows for the connection time, or you could write the last time to connect with a script (maybe that is the reason for your first question?).

  Mike

• Caught in the trap of mouse inside the VM console

  Hello

  We are currently running VSphere Client Ver 4.  We have 2 ESX, running a total of 7 VM servers, two of which are Terminal Server servers.  Due to software compatibility issues, we have currently use Server 2003 on the TS.  I recently had to upgrade the Terminal Server 2003 R2 servers.  Now, given that the upgrade has arrived, the mouse is trapped inside the console of the virtual computer.  Using ctrl + alt it will come out, but before the upgrade, all our VM did not get caught the mouse.  Is there a way to configure the s TS do not trap the mouse?

  Thank you!

  Just do a right-click the virtual machine in vSphere and select comments--> installation / upgrade VMware Tools

  You will need to restart your virtual machine after the installation.

  Kind regards

  Mario

• Microsoft Clustering and iSCSI disks (inside the VM)

  Hello.

  We are in a situation where we would like to build a virtual Microsoft Cluster test and development (no use of production). Ive been reading this article: http://www.vmware.com/pdf/vsphere4/r41/vsp_41_mscs.pdf that describe the configurations are possible, but my idea is not mentioned.

  I thought create two Windows 2008 R2 VMs (on the same ESX hosts) and inside the guest OS use iSCSI initator to connect to a (physical) SAN iSCSI for Quorum disks and the resource.

  That should we not possible even though it is not mentioned in the article above?

  Don t worry not... will be stable, but follow the document on MSCS ok?

  And create an irtual vinternal without Teddy BEARS for the pulse switch.

• Does someone have a MagSafe 2 power adapter whose serial number is located inside the space where the two pins?

  Hi guys!

  I want to know if the power adapter of MagSafe2 that I just bought is genuine or counterfeit.

  I bought a MagSafe2 power adapter that has its serial number located inside the space where the two pins. Its model # is A1424. All the power MagSafe adapters I've seen always have serial number located under the round metal head big (I guess it's called head male or female?). Please see photo for reference.

  If any of you have or had any Apple Store, can you let me know?

  Thank you!

  

  My 85 Magsafe is exactly identical to your image.   It was 'inside the box' with a new MBP computer.

• Cannot scroll inside the drop down Menus

  I just got a new laptop (Windows 7 Home Premium 64 bit) HP, installed Firefox 11 (now updated to 12) and discovered that when using the touchpad (Touchpad Synaptics v8.1. Driver provided by Synaptics, version 15.3.29.0 as of 10/13/2011), I can't scroll inside the drop down menus.

  To replicate, go to this link: http://sacramento.craigslist.org/sss/

  Click on the drop down menu to the search category. Use the touch pad to scroll through the list. Mine closed list and returns focus in the browser instead of scrolling of the list. It then scrolls the window of the browser instead. This works fine in IE. I tried the things:

  Safe mode
  Unchecking scroll smoothly
  Uncheck auto-scroll
  Uncheck the hardware acceleration

  And about all the various combinations of the above things. I also tried to restart Firefox every time I made a change. Nothing seems to solve this problem.

  Oddly enough, if there is a window of text within the page (as I write this), I can scroll than fine. Once I move my mouse out of the box, it scrolls the homepage very well. I don't think that it is a matter of the development following the mouse, there something to scrollable drop-down boxes that specifically seems.

  Also, I must point out that all the pages I have problems with work well in IE how they SHOULD work in Firefox.

  I had this exact problem, the same features of HP and the driver Synaptics. I went to synaptics site and downloaded their latest driver which is lower 15.3.29.0 for some reason any. There 15.2.20, I got this one for 64 bit since that's what I have. You must uninstall the 15.3.29.0 first because it is "newer". He now works properly in FF and IE and everything else. If for any reason any the last FF has a confrontation with the latest version of the synaptics driver and FF devs had to include a fix in the next patch.

• HP 24-g080na all-in-one: disk lost inside the PC

  I put a dvd in the drive and it should not have been broken in properly because I heard him fall into the machine.
  
  I have no idea how to do to get it out again, (searched forums and found a similar topic in this section, but different model PC instructions so unnecessary!) or if it will do no harm, although it is there :/

  Thanks in advance for any help!

  Hi there @Rebecca89,

  Welcome to the Forums of HP Support!  I understand that a DVD came loose and dropped inside the DVD player or on your computer.  I'm happy to help you with this.

  You can try to remove the DVD drive and see if you can get the disc from the drive, if this is where he is, or open the computer to gain access to the drive if it is in your case.  Please see maintenance and Upgrade Guide that is in several languages, but has illustrations on how to open the case and remove the DVD drive.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Information inside the urlclassifier.sqlite

  Does anyone know if this file can be of any help, trying to find the browsing history? He was erased on my PC and it is the only file that has not been affected.

  Also, when the Firefox cache is deleted, can it be moved using a hard disk removal tool?

  The data are collected inside the places.sqlite file and because there is no function cancel as when editing a document, the data is permanently lost. Sorry to say this, but I think the only chance would be a backup or an earlier version.

• My Tablet stolen inside the car to Boisar

  My bag stolen inside the car to Boisar (Thane, Maharashtra) and my Tablet has the inside of the bag, I have a complaint, but you know how our police service is, so please track my Tablet using the IMEI number and help me get it back. That will offer you the IMEI number please contact [personal information deleted]

  Thank you

  Hi @Salmansk

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• Toshiba KIRA-102 with dust inside the screen

  Hello

  Big disapointement! It's my 4th Toshiba (first back in 1997... and still works!)
  My Satellite M30X with 10 years (ok) and my Tecra R840 with 3 years works 24 hours a day from the last August :-)

  The las one... a 102 Kira bought las November!
  Never had this problem: a task of dust about an inch or two the upper of the screen... but inside the screen!

  Now what?
  It's really annoying because it's the perfect... Toshiba advertising ultrabook!

  Paulo

  Hello

  To be honest, I never read on the problems of dust inside the display area.
  However, the mentioned absence looks like hardware related issue with material in question must be reported to the Toshiba authorized service provider in your country.

  In my opinion you should talk to the ASP guys on this problem of dust and probably they will replace the display panel

  On this page you will find all the Toshiba ASP available worldwide:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Computer laptop HP G60-230US, - power connector inside the computer laptop seems to be losing

  HP G60-230US laptop

  I started to notice that my laptop power connection has been a little lost; a little later, I needed to play a bit with the connection so that the power would not disconnect; now, it seems that something got completely lost inside the connector and I get no power in my laptop.  How can I get this connector and replace or tighten?  I already tried to open the lid, but did not see an easy way to access it.  Thank you very much for your suggestions.

  Levega.

  Your power supply is not on the system board.

  Here's an Ebay link for your jack.

  http://www.eBay.com/ITM/HP-G60-230US-AC-DC-power-Jack-port-socket-cable-harness-/281245790468?PT=Laptop_Adapters_Chargers & Hash = item417b8e3104 #ht_101wt_1312

  Here is the link for your manual. "Page 4-46.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  I hope this helps.

  REO

• Satellite P200 - 1 K 9 - dirt inside the LCD screen

  Hello

  I have a problem with my screen, it works fine, but there seems to be a specification of the dirt of somekind inside the screen, it is not dead pixels because you can see them when the screen is off. another poster commented on this problem, but the response was not very helpful. any suggestions?

  And yes my warranty ran out. the laptop is a P200 - 1 K 9, about 3 years now and it is very annoying. about a dozen small spots around my screen, they look almost like chips little plastric, nothing more than 5 mm long, and in different directions. This laptop has never been anywhere except in and around my house.

  I put t know what kind of suggestions you want to read here.
  If you want to clean screen must be disassembled, cleaned and put together.

  Either ask the service to do this on the professional track and for costs or try to do it on your own including risk of damaging something.

  Out of curiosity, what kind of answers you have before?

• My light inside the laptop goes dark Sun, suggestions why?

  In the last two days my light in my laptop guard fluttering and from dim to dark, this morning I couldn't see all the screen. This HP laptop was purchased almost four years ago brand new costs nearly 1, ooo don't know could be suggestions? Need help.

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq has made thousands of different computers. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number.

  

  In general, sceen 'floating', 'gradation' and the screen goes dark, point to lamps backlight and/or inverter of backlight out. These parts may be available for purchase, if you want to try to replace them.

  Please click the White Star of KUDOS to show your appreciation

• How to redefine the function in nsLoginManager.js inside the omni.jar

  I want to redefine a function. I find the definition inside the omni.jar in the nsLoginManager.js file. If I rename omni.jar in omni.zip, I can see the content, but if I try to drag a nsLoginManager.js update to archive, Windows 7 complains that the archive is corrupt. I tried to put an extra copy in nsLoginManager.js in the components directory, but it does not prevail on the definition on the other.

  How can I edit omni.jar to include my new nsLoginManager.js with my update funtion?

  You can watch/issues/799489