Inspiron 15 3521. Media [Fail] error checking. I just got a new hard drive

Similar Questions

• Failed to retrieve the system on a new hard drive

  Hi all

  I've owned a large Pavilion s5325UK that the last few months, threw up Smart new warnings on the disk may fail.

  Yesterday, I bit the bullet and paid for a new HDD to be brilliant.

  Copied all my user data etc. to offshore on an external drive OK.

  I got the system once before after a kidnapping missed an infection by the virus.

  Installed the new drive is a Seagate Barracuda 500 GB SATA 600 7200 RPM 16 MB 3.5 "

  The party went well past and that seems to be made of conservation treatment unit to restart.

  Windows cannot be installed on this material,

  Then it's a series loop of reboots everything ending in the same error.

  The old drive is a Western Digital Caviar Blue of the same size.

  The problem with the new hard drive.  I dropped on a XP Pro image and mounted the drive to an old pc from redundant and it starts very well even if I do not mind that install drivers etc chip that was only to check the disc.

  I'm a bit confused now as I have now tried the recovery process 3 right now with the same error at the end of each attempt.

  Any suggestions are most welcome, thank you

  Hello:

  Make your own Windows 7 If installation media you can read all 25 characters of the product key of MS Windows 7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• 'operating system error' at startup after installing a new hard drive

  Original title: sys.error of operation

  I replaced my hard drive on another pc. power computer peripheral ireconizes but then goes to black screen saying operating system error.  What should I do?

  Install an operating system on the new drive.

  All WinXP installation CD legitimate are bootable and access the capability of deleting, creating and formatting partitions.

  Simply boot from the Windows XP installation CD.  You will be offered the possibility to delete, create, and format partitions as part of the installation process. (You may need to rearrange the order of the boot devices in the PC BIOS to boot from the CD.)

  How TO install Windows XP
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;316941

  http://www.michaelstevenstech.com/cleanxpinstall.html

  http://www.webtree.ca/WindowsXP/CLEAN_INSTALL.htm

• Hard disk failed to keep windows 7 for the new hard drive or SSD

  Hi, windows told me recently there is a problem with my hard drive and that I would back up my data to an external storage device, in case it fails, but don't want to backup my files because they aren't important. When I tried to access file Explorer the next day I got the warning my computer froze. I'm not him have not restarted the laptop since then in fear that it could make it more worn, since I may still need it.

  I try to order a new hard drive or SSD and won't buy windows 10 because it's expensive. Instead, I want to keep my current operating system, which is windows 7 Home premium, which is preinstalled on my laptop.  I have no recovery disks and I didn't do all the backups at all, but here is a windows 7 product key stuck on the back of the laptop.

  I was wondering if I can use the product key to install windows 7 on the new HDD/SSD and if yes, how, I would go to this topic. Also, if I can't do the wrench is it another way (because I may be able to use it yet), because I don't want to have to buy any other OS.

  Specifications:

  Laptop: TOSHIBA Satellite A660

  OS: Windows 7 Home Premium

  (Let me know if you need more details)

  Thanks for any help.

  If you are still able to boot from the Windows 7 Desktop on the current hard drive, try to create a set of recovery disks. See the instructions in the following article:

  https://NeoSmart.NET/wiki/Toshiba-Recovery-disk/#Create_disc_for_Windows_7

  After you create the defined recovery disc, close, install the new SSD, then use the updated recovery disk to reinstall Windows 7 on new disk SSD.

  You will need 4 blank DVDs.

• Reinstall Windows Media Center under Windows 7 Ultimate after the new hard drive, installed using Microsft Windows 7 disc

  I had the misfortune I had to replace my hard drive on my Toshiba laptop after reinstalling my Windows 7 Ultimate disc, I find that I am unable

  load the Windows Media Center software. When I click on the location of the file, some files are visible, but it does not load.

  Can I use the disk window to replace or repair the Windows Media Center files without causing other problems?

  Don Winston Hills NSW Australia

  Open your Start menu by pressing the Windows key and type FEATURES in the search box. Select 'Windows turn features on or off ". When the Panel opens, expand the category "Media Features" and place a check in the box "Windows Media Center". You may need to restart after Windows reconfigures itself.

• Check read the code 0000 T500 failed error even with a new hard drive

  Hello

  My T500 was slammed very hard one day, once I reboot, he worked for half an hour and gave up. I tested via the BIOS, he gave me code 0000 read failed error check.

  I presume that the HD is dead, inserted an a healthy Interior and works very well for a few hours and give up once again, tested by BIOS gave me the same error code.

  I was wondering what problem could be?

  best,

  Sy

  Yuanshi wrote:

  I presume that the HD is dead, inserted an a healthy Interior and works very well for a few hours and give up once again, tested by BIOS gave me the same error code.

  You can also prove that it is a SATA interface error by testing two hard drives in a box USB or Firewire. If you can live without portability, then perhaps this is also an option to use the T500 in the future.

• Hard drive, at default, installed the new hard drive, Windows XP Home Edition won't start more additon error 800b0100 does - is what I do?

  My computer is 4-5 years: Inspiron 530, my operating system is Windows Home Edition SP. My hard drive has failed. I installed another hard, formatted drive with the CD that accompanies the Service Pack 2 computer, and then tried to install (from CD) Windows XP Home Edition, has received the error 800b0100 message.  What should I do?

  Hello

  1. what kind of hard drive you are using? IDE or SATA
  2. What is the full and exact error message?

  Check if the following steps will help:

  1. While the installation program is running and the error message appears on the screen, press SHIFT + F10 to start a command prompt.
  2. at the command prompt, type cd\windows\system32\ and then press ENTER.
  3 type rename catroot2 catold, press ENTER, and then restart the computer.
  4. check again the issue.

• NB200-10 - new hard drive and media test failure

  We have 2 NB200 if we take hardrive out 1 and in the other data on the disk will be lost.

  I mounted new NB200-10z hardrive when turn on I get the error message 'media test check the cable to break. There is no cable as hard drive just plugs into t he average new hard drive is faulty?

  > f we take hardrive out 1 and in the other data on the disk will be lost

  Of course, you won't lose any data. If only you don't drop it on the ground. :)

• Windows 7 Home Premium loading of a new hard drive. Error 0 x 80070017, driver manager couldn't do.

  Windows 7 Home Premium loading of a new hard drive. Get error 0 x 80070017. Can not find the driver manager. How can I solve this problem and get Win 7 responsible?

  This is a new generation, the motherboard Intel DZ68DB Media Series for processor LGA1155 albums, office.

  I am a bit stuck!

  Check out this link

  http://search.Microsoft.com/en-us/results.aspx?q=0x80070017&x=11&y=8

  Good luck.

• Desktop HP Pavilion p6-2123: New Hard drive with Windows 7 but cannot get online... need adapter... network error 0 x code 80070017

  I installed a new hard drive and clean installed Windows 7 from a dvd, so I could then install Windows 10 from a record since the upgrade on my pc failed repeatedly.

  After I installed 7, everything worked except that I can't go online. I get error code 0 x 80070017 that tells me to install a network adapter or reinstall a driver. My internet connection in our House work that my husband is able to get online. We have Verizon DSL internet via a network cable.

  My husband downloaded the necessary driver for my pc to a website of HP flash drive, but it Wouln't install/run on my pc.

  Thank you for your help.

  At any time.

  I am pleased to have been of assistance.

  If you still have problems with the flash player and this file, the only other suggestion I can offer would be to burn the file to a CD and run the executable file I've first validated from the CD or transfer the 2nd file I posted from the CD to the hard drive, or find the driver on the CD folder.

• 0xe0f00013 (new hard drive) retrieving error code

  Laptop model: HP envy 14 beats 1260se, windows 7 64 bit.

  OK, here's the story. A couple of weeks ago, I did a test drive and this error 'problem of intelligent control' came, and after spending some time on the internet, I discovered that I need to change my hard drive. I created a post as well, here is the link:http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/Smart-check-issue/m-p/2337229

  So now, I bought a new hard drive and the model is: 750Go momentus XT (link:http://www.amazon.co.uk/Seagate-750GB-Momentus-Serial-Hybrid/dp/B0068QO82G/ref=sr_1_1?ie=UTF8&qid=13... )

  I replaced my HD and so my recovery disks to reinstall windows and basically copy all the original files in the new HD. However, at the end of the restore process (7 discs), I received this error: "Recovery Manager could not restore your computer by using the original image. Please contact HP support. "Error code: 0xe0f00013.

  And then after I pressed 'Finish', he went on the screen of my laptop which basically a HP logo appears and it stops right there!

  I have no idea what to do now and it becomes really annoying!

  Thank you, Aria.

  Hi Aria,

  It seems that you bought a hybrid car and this is probably what causes the error when you try to use your initial recovery disks.

  Here is another solution, you can try which should allow you to load Windows 7 on your new HARD drive.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version that originally came with your laptop - IE Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is Here. These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• Errors in the world when you try to reinstall Windows XP on a new hard drive.

  Original title: errors everywhere!

  Hi all:

  I recently bought a new hard drive (seagate momentus xt) for my older PC toshiba M70 laptop. I tried to re - install Win XP on the recovery disk (which came with the laptop) but I got a black screen with cursor. I repeated the collection, same thing. To check that all was well with the disc, I scanned and then installed ubuntu 9.04 it work perfect! What is interesting is that in the prior installation, he showed that win xp has been installed on the disk. Then I tried to re - install win xp - then I got this error Grub 17... I went back with the facilities and now I'm at a point where I get a message "error: unknown filesystem grub rescue >" (after the installation of ubuntu 11.04, then windows again). I don't know what to do. What I want is my xp back, I can't get ubuntu. Help, please.
  Thanks in advance.

  Hi ARolle,

  ·         It is reinstall drive?

  Method 1: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: Try to boot from the CD and see if you can start the installation.

  Contact Toshiba to get more information on the type of disc you use to reinstall Windows.

• Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

  Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

  Here's the situation.

  I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

  I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

  Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

  Thank you in advance!

  Maybe not...

  The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

  I looked at your system and found this article that you can read to see if it sounds like your original question:

  Windows Setup could not configure Windows on hardware on this computer.

  http://www.Dell.com/support/article/us/en/19/SLN293812/en

  Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

  Could you take the issue in the Dell online community where experts hang out (especially your amber light).

  Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

  http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

  The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

  If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

• Validation windows w/new hard drive error hr = 0 x 80070002.

  Separated from this thread.

  I also have this problem after getting a new hard drive and it's prevent me from being able to update windows. Here are the results of the diagnosis that I had

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {6B58A49B-9836-446B-A3B4-3A834348FFD9} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 114 blocked VLK 2
  Microsoft Office XP Professional with FrontPage - 114 VLK blocked 2
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {6B58A49B-9836-446B-A3B4-3A834348FFD9}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1437691717-1050004825-4251990486Shuttle Inc.SG31Phoenix Technologies, LTD6.00 PG20071115000000.000000 + 000814F3707018400F804090409Time(GMT-08:00) Standard Pacific03Shuttlshuttle 114114Microsoft Office XP Professional with FrontPage1039476F84C4B40044iCnywwNW1w4s9ukTIwGMGxyGic = 54185-640-0000025-17197 14

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7601.0000-0712014
  Installation ID: 006674868471826234198492419413600685441546958305595883
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: Notification
  Reason for the notification: 0xC004F07C.
  Remaining Windows rearm count: 3
  Trust time: 14/09/2014 14:09:04

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x80072EFD
  Beyond: 0 x 0000000000000000
  Event timestamp: 7:17:2014 10:53
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAJJTousKPADSqdkjkZI6qGU6GipuiLxn0Rso =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Shuttl shuttle
  FACP Shuttl shuttle
  HPET Shuttl shuttle
  MCFG Shuttl shuttle
  SLIC Shuttl shuttle

  Installation of Windows and Office are counterfeits.

  You use an OEM_SLP for Windows key that is valid ONLY for machines shipped with Windows 7 pre-installed - your machine was made two years before Win7 is released and may not support such a key.

  The Office installation is based on a stolen Volume license key.

  You must reformat and reinstall real media and keys.