Inspiron 1525, no audio when connect you via HDMI cable to the HDMI to Plasma

Similar Questions

• Latitude E6440 display blink when connect you to an external monitor via hdmi to VGA Converter

  Hi Dell Community,

  Please help me diagnose what's wrong with my new laptop.

  My laptop is Dell Latitude E6440, but whenever I connect external monitor to my laptop HDMI via HDMI port to the converter VGA, the external monitor still flashes randomly every two seconds. This VGA HDMI converter / works fine when I used it on the other laptop.

  Currently I still have the chance to try my laptop HDMI port to connect directly to a HDMI monitor because I don't.

  Is it that someone has the same problem with me? Thanks for your help.

  Dell currently manufactures replacements of main card to resolve this problem. They will be available at the end of July. Please make sure you have a current subscription and contact support to be eligible for replacement.

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• BlackBerry smartphones < my blackberry lost day and time when connect you the bb to computer!

  Hi, my lost bb day and time when connect bb to the computer, the change time bb and another area, it is normal?

  My phone says dealer "it's normal in this smart phone" is really true?

• Laptop computer connection TV via HDMI cable... no image. ?

  I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable.  Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty.  He continues to tell me that there is no signal, but both devices are connected.

  Any help is greatly appreciated!

  Hi Ashley... B,

  Thank you for visiting Microsoft Answers.

  Which version of Windows Vista is installed on your computer?

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
   
  Link to view:
  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
   
  Hope the helps of information. Please post back and we do know.
  Kind regards
  Joel S

• Inspiron 530 s displays only half screen via HDMI or DVI

  I have a strange problem that I'm seeing with an Inspiron 530 s that I'm trying to get up and running again.  It seems to work fine if I use the default VGA port, but if I try to connect it to a TV via HDMI or DVI, it only appears on half of the screen.  The left side of the screen looks normal (be it screens start Dell or actually in Windows).  The right side of the screen is a series of vertical lines.

  I checked the video card isn't the issue.  I swapped another video card in and it does the same thing.  Both cards work fine in another machine.  I also checked the TV working properly.

  I hung the 530 s on a normal 17 "monitor via the VGA port and I see the entire screen.

  The version of the BIOS is 1.0.0.18 that I understand to be the latest version.

  I really want to get this working, but I'm not sure what to look at this point.

  Other tests established that the 530 s as well as the 531 s (which I could test on both) must have problems with some video cards.  Once I established that the question could be reproduced on both models, I decided that this must be an incompatibility problem rather than a problem with the motherboard.

  I decided to try to get Windows installed despite the half of the screen.  Once I had Windows installed, I changed the resolution to the native resolution of the TV (1366 x 768) and the damaged screen went away.  Somehow, it was fixed even if I rebooted the machine, at this time there and I was able to navigate through the BIOS with a normal screen.  In fact, I was not able to reproduce the problem again until completely stop the machine and remove the power completely.  After that, the machine would still start with display messed up, which would remain until when you start Windows, it changed the resolution of the screen at native resolution and there again it would be "fixed".

  The video card is not really new, but I think that it may have been written in a more recent specification of the standard PCI-E that this motherboard can be expected.  If I were so inclined, I could probably find a video card that does not have this problem, but instead, I think I'll just this weird issue.

• infinite loop when connecting to time warner cable

  I get an infinite loop when you try to connect, it keeps going to connect and flashing then go back to the login page.  This site allows me to watch TV via my internet connection that works normally, including HBO, pay-per-view movies, guide, etc.  Currently only Firefox works, but I prefer to use Safari who has this problem.

  I suggest you only begin by taking the measures recommended in this support article.

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• After running System Restore my computer asks for a password when connecting and I don't remember the password.

  I am running Vista Home Premium on a laptop Toshiba Satellite L305.  I ran the system restore due to a problem of "Internet Explorer cannot display the website" (by Microsoft troubleshooting guide for this problem) and selected restore point earlier.  Now the computer asks for a password that I don't remember.  I tried all the possible passwords I can think.   There is only a single user account on this computer.  The administrator account should be disabled, it is not an option when connecting safe mode.  I don't have a system repair disc set.   Is it possible to run the system back restore to select a more recent restore point which does not require a password?  Or y at - it another way to connect to the computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  If you tried to use the system restore to solve a problem, but the problem remained or other problems were introduced, you can undo the restore operation. After you cancel the system restore, you can try using a different restore point.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• Can't play BluRay from PC via HDMI on plasma TV

  Im having a problem playing a bluray to PC via HDMI on the sanyo plasma TV

  Introduction page of the fine BD functions with the sound, but the actual sound when the movie plays dosent work.

  Someone at - it ideas

  Hello

  Pleas check contrl Panel-> sound-> read if HDMI has been defined by default.
  This is necessary if you want to have the sound of the TV connected to the laptop via a HDMI cable.

  Welcome them

• No Satellite A300-1MC no sound when connect you to the LCD

  When I connect by Satellite A300-1MC HDMI port for my Toshiba Regza 37 "AV LCD series 37AV555DB and play a movie the sound comes out the laptop and not from the TV...?

  I have to do something to the settings? I tried other HDMI port and have the same problem...! Please can someone help?

  Do I need an another audio connecting cable? I used a VLC Player on the laptop, if this can be the problem?

  Any suggestion is welcome.

  Thank you

  Hello

  I checked Toshiba basic knowledge about the Toshiba support page and found some interesting documents that can help you:
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm - This document is written for Qosmio laptop but the principle must be the same.
  Is under audio playback are peripheral digital (S/PDIF) or HDMI output?

• No sound when connect you external speakers

  original title: external speaker problem

  I have a small speaker set external USB connected to my laptop.  Recently, I disconnected them and change the sound settings to use the laptops speakers.  When I plugged the speakers external back in, I have no sound.  There is no installation CD and my drivers seem to be OK, although I'm not sure.  I search for drivers and everywhere that I go I thought that my audio drivers are up to date.  Help!

  Hi, George,

  I am happy to know that the problem is resolved, the problem related to the system restore, I ask allows you to create a new thread to help you better. You can create a new topic by clicking on the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp

• AutoPlay does not illuminate when connect you camera

  original title: AutoPlay

  Hello! I have a problem with a camera Fuji Finepix J12 and is that when I connect the camera to the PC via the USB of the PC bleeps port as if he found something being plugged, but no AutoPlay appears and there is no sign of the drive in my computer. If I Plug one of my readers, flash etc. they show all with Autoplay and show in my computer. So annoying because it seems like this device which is the problem, but it worked OK in the past. In the AutoPlay list Finepix J12 watch. Help, please

  After turning on the camera and pressing the button for approx. 1 second reading, that the PC should recognize the camera automatically, Fuji FinePixViewer should start automatically if it is installed and load photos window is displayed, otherwise you can try to uninstall and reinstall the software, please refer to your manual.

  When there are a lot of images stored in the memory card, it takes time to display on the screen of your PC. In addition, it may take some time to import images or you may be unable to save pictures. In this case, use a picture memory card reader.

  I hope I could help

• When connect you to my group residential-why do I receive a message indicating that the bidirectional support is disabled

  When I'm connected to my home group, so I could share a printer. Everything was wonderful, but I get a flashing message indicating 'bidirectional support is disabled. It is in the printer properties, or perhaps something that should be changed also? I checked everywhere I know to turn it on, but I'm starting to think that I am interested in this problem the wrong way. Can anyone help? Oh, the printer is a Kodiak 9200 and connected via usb.

  Thank you
  Raven

  The following can help (note also the Note at the bottom that says you need to do from computer connected via USB): http://support.en.kodak.com/app/answers/detail/a_id/1294/selected/true

• Satellite Pro M50: Lobos SkyMe internet phone will not be installed when connect you

  I would welcome suggestions for a USB problem.

  A Lobos SkyMe internet phone will not install when it is connected to a USB port, but will install when plugged into my Shuttle PC.
  Historical precedents with the USB ports on this Satellite Pro M50, I'm pretty much at my wits end.

  Apparently, no driver is necessary, but I wonder if there is a registry hack to force recognition?

  Hello

  Could you describe in detail what does not work? You get an error message?

  I m not an expert in internet phone installation and didn t install similar devices in the past, but I imagine that the phone should recognize the new plugged the USB with no problems.

  If there is a problem with the USB device recognition go to Device Manager and remove all the controllers and the USB ports.
  Reboot the laptop.

  After that process, the operating system installs the ports again.
  Then you could try to connect the external USB device to the laptop USB port.

  PS; to make sure that the USB ports will provide enough power, you must disable USB energy saving properties.