Laser Jet P1102s: Win7Control Laser Jet P1102s Panel question

Similar Questions

• HP Office Jet 6700 Premium: question of power supply?

  Printer was working fine. In the middle of the night, there was a power failure. Now, the printer does not illuminate. The power indicator led lights when the power supply is plugged into the wall. It will remain on until the adapter is connected to the printer. Then the light goes off. The light not come back up until the power supply is disconnected and then reconnected the wall. The printer is almost 3 years old in April. The brilliant minds of ideas of the internet?

  Does not look good. Be sure to try combinations of unplugging and pressing the power button to see if you can get the printer to wake up. If you are out of luck... no luck.

• Windows 8.1 update, my documents, and control panel questions

  I have a laptop HP Envy m6 and a few weeks ago, put PC updated to Windows 8.1 Windows 8. It was working fine until yesterday.

  When I open Explorer file it says that the 'My PC' folder is empty. Other times it works fine when the file Explorer is the first open but will not work if it is closed and reopened without restarting the computer. I also discovered that the Panel does not work. It opens but the window is empty. I can not access anything which would be normally accessed through the control panel as change the wallpaper, add or modify the equipment, etc.. Finally, with the exception files, icons indicating the type of file for example the Word Document, Pdf etc. do not appear when displayed in the file Explorer, but view correctly on the desktop computer. The computer works - I can access the internet, save, and create documents, but struggle to access later (if possible).

  Thanks for your help.

  NeedHelp55,

  If the upgrade has been done for weeks, while the problem is probably not the upgrade itself, although something is certainly wrong since then.

  Thoughts on the subject...

  ==========================================================================

  Windows updates

  If you have not done recently (or at all) be sure that you have all of your updates to Windows Installer.  Some people are 'Anti update' and the world can be a scary place with updates that don't always work as planned.  You have not to install updates for Windows 8.1 after the upgrade - this isn't a choice.  You can always disable them again later.

  ==========================================================================

  System Restore - back in time

  If the system has recently installed updates, and then if the system has created a Restore Point before these updates applied, then you can "back track" to a date / time before the changes have been made.

  Using Microsoft System Restore (Windows 8)

  Don't forget: you can create a Restore Point manually any time you want if you have these "back points."  This occasionally - it of a good thing and could save your back one of these days.  The smile.

  ==========================================================================

  New user account

  You could try to create a new account - create with administrator privileges, just in case you need the account later.

  If you can get the PC settings, then you might be able to create a new account.

  Long way around:

  Windows key > type anywhere pc > click PC config > other accounts > add account

  You can name the account that you want, and you can use with your current Microsoft account, login if you wish.  You may need to obtain a new Microsoft login code - you can use another device (phone, Tablet, another computer) to pick up the email containing the new code that will be sent to Microsoft.

  Log in to the new account and put in place the "settings" for this account.  Check if the new account actually works as expected.

  IF the new account is working and that your old account is messed up, then - use the new account, at least until you have one fix for the other.  You can always copy your documents.  Configure the settings for the account manually, however, to minimize the chances that 'break you' the new account.

  ============================================================================

  Click on the thumbs-up Kudos to say thank you.

  While I strive to reflect best practices of HP, I do not work for HP.

• Want to 5640 matter Panel & question Photo printing via the web

  [update]

  -the solution of JERENDS on the first question did.

  -discovered what is the second problem: you can only print photos on paper special photo via the photo tray. not entirely what I expected, but at least I know what is happening.

  [/update]

  I just install the 5640 want and it works reasonably.

  Two problems though:

  -try to get to any screen outside the home screen in the home Panel jumps me to the homescreen within seconds, so I can't change settings or get anything done.

  -Try to print one or more photos via the e HP Android app results in nothing, where to print a PDF file through the same e application results in a nicely printed PDF.

  Hope that someone has seen this before and knows a solution.

  Thanks in advance!

  Hello SierraMikeDelta,

  Welcome to the Forums of HP Support!

  I think the first question that needs to be addressed is the problem of touch screen. It is a generic guide, but still has the necessary steps: touch screen is unresponsive.

  Let me know if that solves this problem, if so we can examine the App does not print photos.

  See you soon,.

• Panel question reducible Spry

  Uses DW CS5.5.  In order to save some real estate on my main page, I intend to create a Spry Collapsible Panel, approx 250 px in width.  Each of the 4 panels I want to create will contain links to other pages of my site.  When the user clicks on one of these links, I assume it will automatically open the page intended as a page full size within the browser, is this correct?  Good number of removable panels I've seen normally open content only within the Spry himself object.  I just make sure my viewers will be automatically taken to a page of size whenever you click on a link, or if I need to code differently for that to happen.  TKS.

  Just make 3 or 4 drop down menus or the normal menus and give the title of each category names.

• Chronology of the Panel questions

  Hi - hoping someone can help here.

  1 I recently 'hit' the editing panel as it is is very well placed in the usual position of . I tried by drag autour but it just will not "slot" position. The problem is that I can't use the whole workspace effectively

  2. anyone can sharpen me the shaded bar representing blue vertical is about 2/3 of the way on the script?

  Thanks ad!

  Jacques
  

  

  At the top right, there is a drop-down of work space. The third substantive item should reset the workspace to try it.

• Panel question book

  InDesign CS5 Mac:

  When I have the Panel open book and I'm going to a different workspace, the book panel disappears.

  Then when I go back to the original workspace, of the book Panel also went.

  When I go the the book Panel file and open it, it does not appear on the screen; However, when I go to leave InDesign, I get the message, do you want to save the changes to your file of book panel.

  So, is this book disappears Panel a bug or something I do not correctly?

  Thank you

  Eden

  And the book panel appears in the list window?

• myDropDownList.onChange buttons hide/visible, staticText etc., but scrolling through albums of all components

  Here is my code, but the thing is when I change my ddList that all objects of the Panel remain in the same place, so the thing is that I want to hide things but scrolling upward things have ordered more of my Panel.

  C5 ToolKit v1.0

  An after effects Script by Adrian Wülfrath

  // [email protected]

  Estudio Voraz

  VARIABLE CALL PARA A LAS DISTINTAS IMAGENES

  var imageName0 = "_vorazimg/voraz.png";

  var imagePath0 = File($.fileName).path + ' / ' + escape (imageName0);

  var imageName1 = "_vorazimg/off.png;

  var imagePath1 = File($.fileName).path + ' / ' + escape (imageName1);

  var imageName2 = "_vorazimg/sni.png";

  var imagePath2 = File($.fileName).path + ' / ' + escape (imageName2);

  var imageName3 = "_vorazimg/sna.png";

  var imagePath3 = File($.fileName).path + ' / ' + escape (imageName3);

  var imageName4 = "_vorazimg/proyectoBtn.png";

  var imagePath4 = File($.fileName).path + ' / ' + escape (imageName4);

  var imageName5 = "_vorazimg/sva.png";

  var imagePath5 = File($.fileName).path + ' / ' + escape (imageName5);

  Voraz Explorer button

  var winBrowserCmd = "C:/Program Files/Internet Explorer/iexplore.exe."

  var macBrowserCmdStart = "osascript-e ' open location------" ";" "

  var macBrowserCmdEnd = ' \ ' "";"

  AQUI BEGINS HAS CREARSE VENTANA DEL PANEL

  {

  function myScript (thisObj) {}

  function myScript_buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ("palette", "Estudio Voraz Panel', undefined, {resizable: true}");

  res = "group {orientation:"column",-}".

  groupOne: Panel {text: 'Master', direction: "column", alignment: ['fill ', ' fill'], alignChildren: ["fill", "fill"],------}

  ddPanel: DropDownList {properties: {items: ['OFF', 'Salida No. Image', 'Salida No. Astérix', 'Salida Ventana Asterix','-']}}, \

  },\

  groupTwo: Panel {text:' template:', direction: "column", the alignment: ['fill', 'top'], alignChildren: ["fill", "fill"],------}

  imageDemo: IconButton {text: 'Model Salida No. Image',}, alignment: ["fill", "fill"],

  },\

  groupThree: Panel {text: 'Color System + line selector', direction: "column", alignment: ['fill ', ' fill'], alignChildren: ["fill", "fill"],------}

  ddColorSystem: DropDownList {properties: {items: ['Amarillo', 'Morado', 'Blue', 'MidBlue', 'DarkBlue','Roj o ']}}, \

  ddLineSelector: DropDownList {properties: {elements: ['line 1' ", ' 1 Hashtag + line" ", ' 1 line + Info", 1 Line + Info + Hashtag ','-', "2 lines","2 lines + Hashtag" ", ' 2 lines + Info", 2 lines + Info + Hashtag ',' '-', ' 3 lines "", ' 3 lines + Hashtag "", ' 3 lines + Info ' ", ' 3 lines + Info + Hashtag"]}},

  },\

  BtnGroup: Panel {text: 'Botones' orientation: 'row', alignment: ['fill', 'top'],------}

  editText: button {text: 'Edit text', alignment: preferredSize ['fill', 'left'],: [80,25]},

  editCaritas: button {text: 'Edit Caritas', alignment: preferredSize ['fill', 'left'],: [80,25]},

  editIconos: button {text: "Edit Iconos", alignment: preferredSize ['fill', 'left'],: [80,25]},

  editImage: button {text: "Change image", alignment: ['fill', 'left'], preferredSize: [100,25]},

  },\

  groupFour: Panel {text:'Caritas / Iconos, direction: "column", alignment: ['fill ', ' fill'], alignChildren: ["fill", "fill"],------}

  ddArreglosAsterix: DropDownList {properties: {items: ['OFF', "Caritas Astérix", 'Iconos Astérix']}}, \

  },\

  groupChecker: Panel {text: 'Options', orientation: 'row', alignment: alignChildren ['fill ', ' fill'],: ["fill", "fill"],------}

  ddPatterns: DropDownList {properties: {items: ['Models OFF', '-', "Acción", "Comedia", "Deportees", "Girly", "Geek", "Todo",' -','EXTRA ','-',' ASTERIX ']}},

  CBfoto: Case {text: "Foto"},

  CBWipper: Case {text: 'Wipper In'}, \

  CBSting: Case {text: 'Hashtag Sting'}, \

  },\

  groupRender: Panel {text: "Add al Render tail", orientation: 'row', alignment: ['fill ', ' fill'], alignChildren: ["fill", "fill"],------}

  renBtn: button {text: 'Add al Render tail'}, \

  },\

  groupVoraz: Panel {text: "www.estudiovoraz.com", of orientation: 'column', alignment: ['fill ', ' fill'], alignChildren: ["fill", "fill"],------}

  myIconButton: IconButton {text: 'IconButton',},

  },\

  }";

  myPanel.grp = myPanel.add (res);

  Default values (Practicamete're nada mas para indicate en position default por goes a permanecer cada cosa).

  myPanel.grp.groupOne.ddPanel.selection = 0

  myPanel.grp.groupFour.ddArreglosAsterix.selection = 0

  myPanel.grp.groupThree.ddColorSystem.selection = 0

  myPanel.grp.groupThree.ddLineSelector.selection = 0

  myPanel.grp.groupChecker.ddPatterns.selection = 0

  myPanel.grp.groupVoraz.myIconButton.image = imagePath0

  myPanel.grp.groupTwo.imageDemo.image = imagePath1

  myPanel.layout.layout (true);

  Home default

  myPanel.grp.groupTwo.visible = true;

  myPanel.grp.groupThree.visible = false;

  myPanel.grp.BtnGroup.visible = false;

  myPanel.grp.groupFour.visible = false;

  myPanel.grp.groupRender.visible = false;

  myPanel.grp.groupChecker.visible = false;

  myPanel.grp.groupTwo.imageDemo.image = imagePath1

  AL HACER CLICK IN THE IMAGEN MANDA UNA ALERTED

  myPanel.grp.groupTwo.imageDemo.onClick = function)

  {

  Alert ("Primero debes seleccionar una opcion del Menu drop-down. ADVERTENCIA esto solo con works the paquetería of channel 5. \

  ("If need more information you can consultarlo con www.estudiovoraz.com");

  }

  From aqui to add todo el código than dedicate con sus variable mandas is a call desde tus variable y functions.

  Sub-panels: (Cuando mandas a con call variable in a number of a specific algo to you UI)

  var BtnURL = myPanel.grp.groupVoraz.myIconButton

  var BtnText = myPanel.grp.BtnGroup.editText

  var BtnCaritas = myPanel.grp.BtnGroup.editCaritas

  var BtnIconos = myPanel.grp.BtnGroup.editIconos

  var BtnImagen = myPanel.grp.BtnGroup.editImage

  var ddSelectPanel = myPanel.grp.groupOne.ddPanel

  var myPanel.grp.groupThree.ddColorSystem = ddColor

  var ddPatterns = myPanel.grp.groupChecker.ddPatterns

  var ddLineSelector = myPanel.grp.groupThree.ddLineSelector

  var ddOpciones = myPanel.grp.groupFour.ddArreglosAsterix

  var rendaBtn = myPanel.grp.groupRender.renBtn

  var myPanel.grp.groupChecker.CBfoto = CFoto

  var CWipper = myPanel.grp.groupChecker.CBWipper

  var CSting = myPanel.grp.groupChecker.CBSting

  var patInp = myPanel.grp.groupFour.patInp

  MANAGER PARA AS VEAN O SE ESCONDAN LAS THINGS LED PANEL

  ddSelectPanel.onChange = function()

  {

  Switch (ddSelectPanel.Selection.Text)

  {

  //PRIMER CASE                                                                                                                                            ---------  SALIDA NO IMAGE   ---------

  case "Salida No. Image":

  myPanel.grp.groupTwo.visible = true;

  myPanel.grp.groupTwo.imageDemo.image = imagePath2

  myPanel.grp.groupThree.visible = true;

  myPanel.grp.BtnGroup.visible = true;

  myPanel.grp.BtnGroup.editImage.visible = false;

  myPanel.grp.groupFour.visible = true;

  myPanel.grp.groupRender.visible = true;

  myPanel.grp.groupChecker.visible = true;

  myPanel.grp.BtnGroup.editCaritas.visible = true;

  myPanel.grp.BtnGroup.editIconos.visible = true;

  myPanel.grp.BtnGroup.editImage.visible = false;

  myPanel.grp.groupChecker.CBSting.visible = false;

  myPanel.grp.groupChecker.CBfoto.visible = false;

  CUANDO SE EN EL MENU SELECT DROPDOWN SALIDA NO. IMAGE O LO THAT MATCH, LO ABRE EN EL VIEWER

  projectItem ("_Render Salida No. Image") .openInViewer ();

  CUANDO SE HACE CLICK IN IMAGE TREE MODEL USED

  myPanel.grp.groupTwo.imageDemo.onClick = function)

  {

  projectItem ("_Render Salida No. Image") .openInViewer ();

  }

  ACCION BOX WIPPER

  CWipper.onClick = function)

  {

  if(CWipper.Value == true)

  {

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("Wipper In").setValue([1]);

  }

  if(CWipper.Value == False)

  {

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("Wipper In").setValue([0]);

  }

  }

  COLOR SYSTEM OF MENU DROP-DOWN

  ddColor.onChange = function)

  {

  Switch (ddColor.selection.text)

  {

  case "Amarillo":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([1]);

  break;

  case 'Morado ':

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([2]);

  break;

  case "LightBlue":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([3]);

  break;

  case study 'MidBlue ':

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([4]);

  break;

  case "blue":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([5]);

  break;

  case "Rojo":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([6]);

  break;

  by default:

  Alert ("error: perhaps no none option selected, brought Nuevo...");

  break;

  }

  }

  LINE SELECTOR DROPDOWN LIST

  ddLineSelector.onChange = function)

  {

  Switch (ddLineSelector.selection.text)

  {

  case "1-line":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([1]);

  break;

  case "1 line + Hashtag:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([2]);

  break;

  case "1 line + Info:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([3]);

  break;

  case "1 line + Info + Hashtag:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([4]);

  break;

  case "2 lines:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([6]);

  break;

  case "2 lines + Hashtag:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([7]);

  break;

  case "2 lines + Info:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([8]);

  break;

  case "2 lines + Info + Hashtag:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([9]);

  break;

  case "3 lines":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([11]);

  break;

  case '3 lines + Hashtag:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([12]);

  break;

  case '3 lines + Info:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([13]);

  break;

  case '3 lines + Info + Hashtag:

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([14]);

  break;

  by default:

  Alert ("error: perhaps not a stereo none option, select una opcion del Line Selector");

  break;

  }

  }

  LIST DROPDOWN CARITAS / ICONOS

  ddOpciones.onChange = function)

  {

  Switch (ddOpciones.selection.text)

  {

  case "OFF":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property (Caritas Asterix").setValue([0])";

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("Iconos Asterix").setValue([0]);

  break;

  case "Caritas Astérix":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property (Caritas Asterix").setValue([1])";

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("Iconos Asterix").setValue([0]);

  break;

  case "Iconos Astérix":

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property (Caritas Asterix").setValue([0])";

  projectItem("Salida_No_Image").layer ("_Control") .property ("Effects").property("Control_v2").property ("Iconos Asterix").setValue([1]);

  break;

  by default:

  Alert ("error: perhaps no none option selected, brought Nuevo...");

  break;

  }

  }

  EDIT TEXT BUTTON

  BtnText.onClick = function)

  {

  projectItem ("NIS _EditTxt") .openInViewer ();

  }

  CHANGE CARITAS BOTON

  BtnCaritas.onClick = function)

  {

  projectItem ("NIS _EditCaritas") .openInViewer ();

  }

  CHANGE THE BOTON ICONOS

  BtnIconos.onClick = function)

  {

  projectItem ("NIS _EditIconos") .openInViewer ();

  }

  MODELS OF MENU DROP-DOWN

  ddPatterns.onChange = function)

  {

  Switch (ddPatterns.selection.text)

  {

  case 'OFF models':

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([1]) of control. "

  break;

  case "acción":

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([3]) of control. "

  break;

  case "Comedia":

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([4]) of control. "

  break;

  case "deportees":

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([5]) of control. "

  break;

  case "Girly":

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([6]) of control. "

  break;

  case 'Geek ':

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([7]) of control. "

  break;

  case "Todo":

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([8]) of control. "

  break;

  case 'EXTRA ':

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([10]) of control. "

  break;

  case "ASTERIX":

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([12]) of control. "

  break;

  by default:

  Alert ("error: perhaps no none option selected, brought Nuevo...");

  break;

  }

  }

  ACCION BOX FOTO

  CFoto.onClick = function)

  {

  if(CFoto.Value == true)

  {

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Foto").setValue([1]) of control. "

  }

  if(CFoto.Value == False)

  {

  "projectItem("Salida_No_Image").layer ("_Control").property("Effects").property (v2").property("Foto").setValue([0]) of control. "

  }

  }

  ADD TO RENDER QUEUE

  rendaBtn.onClick = function)

  {

  var QTtemplate = "Lossless." Select el model

  salt1 var = projectItem ("_Render Salida No. Image"); Search the model that will has Renderizar por su number

  var newPath = ('Salida No. Image');  Este are el number del path knew the asigna para salida to

  If (salt1! = null & & salt1 instanceof CompItem) {}

  var theRender = app.project.renderQueue.items.add (salt1);

  If (salt1 == salt1) {}

  theRender.outputModules [1] .applyTemplate (QTtemplate);

  theRender.outputModules [1] mpfprojectdir\dev10\src\csharp\projectbase.file = new queue (newPath);

  }

  }

  }

  break;

  //SEGUNDO CASE                                                                                                                                    ---------  SALIDA NO ASTERIX   ---------

  case "Salida No. Asterix":

  myPanel.grp.groupTwo.visible = true;

  myPanel.grp.BtnGroup.editImage.visible = true;

  myPanel.grp.groupTwo.imageDemo.image = imagePath3

  myPanel.grp.groupThree.visible = true;

  myPanel.grp.BtnGroup.visible = true;

  myPanel.grp.groupFour.visible = true;

  myPanel.grp.groupRender.visible = true;

  myPanel.grp.groupChecker.visible = true;

  myPanel.grp.groupChecker.CBSting.visible = false;

  myPanel.grp.groupChecker.CBfoto.visible = false;

  myPanel.grp.groupFour.visible = false;

  myPanel.grp.BtnGroup.editCaritas.visible = false;

  myPanel.grp.BtnGroup.editIconos.visible = false;

  myPanel.grp.BtnGroup.editImage.visible = false;

  CUANDO SE EN EL MENU SELECT DROPDOWN SALIDA NO. IMAGE O LO THAT MATCH, LO ABRE EN EL VIEWER

  projectItem ("_Render Salida No. Asterix") .openInViewer ();

  CUANDO SE HACE CLICK IN IMAGE TREE MODEL USED

  myPanel.grp.groupTwo.imageDemo.onClick = function)

  {

  projectItem ("_Render Salida No. Asterix") .openInViewer ();

  }

  ACCION BOX WIPPER

  CWipper.onClick = function)

  {

  if(CWipper.Value == true)

  {

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("Wipper In").setValue([1]);

  }

  if(CWipper.Value == False)

  {

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("Wipper In").setValue([0]);

  }

  }

  COLOR SYSTEM OF MENU DROP-DOWN

  ddColor.onChange = function)

  {

  Switch (ddColor.selection.text)

  {

  case "Amarillo":

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([1]);

  break;

  case 'Morado ':

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([2]);

  break;

  case "LightBlue":

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([3]);

  break;

  case study 'MidBlue ':

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([4]);

  break;

  case "blue":

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([5]);

  break;

  case "Rojo":

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([6]);

  break;

  by default:

  Alert ("error: perhaps no none option selected, brought Nuevo...");

  break;

  }

  }

  LINE SELECTOR DROPDOWN LIST

  ddLineSelector.onChange = function)

  {

  Switch (ddLineSelector.selection.text)

  {

  case "1-line":

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([1]);

  break;

  case "1 line + Hashtag:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([2]);

  break;

  case "1 line + Info:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([3]);

  break;

  case "1 line + Info + Hashtag:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([4]);

  break;

  case "2 lines:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([6]);

  break;

  case "2 lines + Hashtag:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([7]);

  break;

  case "2 lines + Info:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([8]);

  break;

  case "2 lines + Info + Hashtag:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([9]);

  break;

  case "3 lines":

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([11]);

  break;

  case '3 lines + Hashtag:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([12]);

  break;

  case '3 lines + Info:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([13]);

  break;

  case '3 lines + Info + Hashtag:

  projectItem("Salida_No_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([14]);

  break;

  by default:

  Alert ("error: perhaps not a stereo none option, select una opcion del Line Selector");

  break;

  }

  }

  MODELS OF MENU DROP-DOWN

  ddPatterns.onChange = function)

  {

  Switch (ddPatterns.selection.text)

  {

  case 'OFF models':

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([1]) of control. "

  break;

  case "acción":

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([3]) of control. "

  break;

  case "Comedia":

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([4]) of control. "

  break;

  case "deportees":

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([5]) of control. "

  break;

  case "Girly":

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([6]) of control. "

  break;

  case 'Geek ':

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([7]) of control. "

  break;

  case "Todo":

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([8]) of control. "

  break;

  case 'EXTRA ':

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([10]) of control. "

  break;

  case "ASTERIX":

  "projectItem("Salida_No_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([12]) of control. "

  break;

  by default:

  Alert ("error: perhaps no none option selected, brought Nuevo...");

  break;

  }

  }

  EDIT TEXT BUTTON

  BtnText.onClick = function)

  {

  projectItem ("_EditTxt SNA") .openInViewer ();

  }

  ADD TO RENDER QUEUE

  rendaBtn.onClick = function)

  {

  var QTtemplate = "Lossless."   Select el model

  var SEL2 = projectItem ("_Render Salida Asterix No.");  Search the model that will has Renderizar por su number

  var newPath = ('Salida No. Asterix');  Este are el number del path knew the asigna para salida to

  If (sel2! = null & & sel2 instanceof CompItem) {}

  var theRender = app.project.renderQueue.items.add (sel2);

  If (sel2 == sel2) {}

  theRender.outputModules [1] .applyTemplate (QTtemplate);

  theRender.outputModules [1] mpfprojectdir\dev10\src\csharp\projectbase.file = new queue (newPath);

  }

  }

  }

  break;

  //TERCER CASE                                                                                                                                            ---------  SALIDA VENTANA ASTERIX ---------

  case "Salida Ventana Astérix":

  myPanel.grp.groupTwo.visible = true;

  myPanel.grp.groupTwo.imageDemo.image = imagePath5

  myPanel.grp.groupThree.visible = true;

  myPanel.grp.BtnGroup.visible = true;

  myPanel.grp.BtnGroup.editImage.visible = true;

  myPanel.grp.groupFour.visible = false;

  myPanel.grp.groupRender.visible = true;

  myPanel.grp.groupChecker.visible = true;

  myPanel.grp.BtnGroup.editCaritas.visible = false;

  myPanel.grp.BtnGroup.editIconos.visible = false;

  myPanel.grp.BtnGroup.editImage.visible = true;

  myPanel.grp.groupChecker.CBSting.visible = false;

  myPanel.grp.groupChecker.CBfoto.visible = true;

  CUANDO SE EN EL MENU SELECT DROPDOWN SALIDA NO. IMAGE O LO THAT MATCH, LO ABRE EN EL VIEWER

  projectItem ("_Render Salida Ventana Asterix") .openInViewer ();

  CUANDO SE HACE CLICK IN IMAGE TREE MODEL USED

  myPanel.grp.groupTwo.imageDemo.onClick = function)

  {

  projectItem ("_Render Salida Ventana Asterix") .openInViewer ();

  }

  ACCION BOX WIPPER

  CWipper.onClick = function)

  {

  if(CWipper.Value == true)

  {

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("Wipper In").setValue([1]);

  }

  if(CWipper.Value == False)

  {

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("Wipper In").setValue([0]);

  }

  }

  COLOR SYSTEM OF MENU DROP-DOWN

  ddColor.onChange = function)

  {

  Switch (ddColor.selection.text)

  {

  case "Amarillo":

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([1]);

  break;

  case 'Morado ':

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([2]);

  break;

  case "LightBlue":

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([3]);

  break;

  case study 'MidBlue ':

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([4]);

  break;

  case "blue":

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([5]);

  break;

  case "Rojo":

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("colour System").setValue([6]);

  break;

  by default:

  Alert ("error: perhaps no none option selected, brought Nuevo...");

  break;

  }

  }

  LINE SELECTOR DROPDOWN LIST

  ddLineSelector.onChange = function)

  {

  Switch (ddLineSelector.selection.text)

  {

  case "1-line":

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([1]);

  break;

  case "1 line + Hashtag:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([2]);

  break;

  case "1 line + Info:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([3]);

  break;

  case "1 line + Info + Hashtag:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([4]);

  break;

  case "2 lines:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([6]);

  break;

  case "2 lines + Hashtag:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([7]);

  break;

  case "2 lines + Info:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([8]);

  break;

  case "2 lines + Info + Hashtag:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([9]);

  break;

  case "3 lines":

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([11]);

  break;

  case '3 lines + Hashtag:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([12]);

  break;

  case '3 lines + Info:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([13]);

  break;

  case '3 lines + Info + Hashtag:

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("line Selector").setValue([14]);

  break;

  by default:

  Alert ("error: perhaps not a stereo none option, select una opcion del Line Selector");

  break;

  }

  }

  EDIT TEXT BUTTON

  BtnText.onClick = function)

  {

  projectItem ("SVA _EditTxt") .openInViewer ();

  }

  BtnImagen.onClick = function)

  {

  projectItem ("SVA _EditFootage") .openInViewer ();

  }

  MODELS OF MENU DROP-DOWN

  ddPatterns.onChange = function)

  {

  Switch (ddPatterns.selection.text)

  {

  case 'OFF models':

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([1]) of control. "

  break;

  case "acción":

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([3]) of control. "

  break;

  case "Comedia":

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([4]) of control. "

  break;

  case "deportees":

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([5]) of control. "

  break;

  case "Girly":

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([6]) of control. "

  break;

  case 'Geek ':

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([7]) of control. "

  break;

  case "Todo":

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([8]) of control. "

  break;

  case 'EXTRA ':

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([10]) of control. "

  break;

  case "ASTERIX":

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Patterns").setValue([12]) of control. "

  break;

  by default:

  Alert ("error: perhaps no none option selected, brought Nuevo...");

  break;

  }

  }

  ACCION BOX FOTO

  CFoto.onClick = function)

  {

  if(CFoto.Value == true)

  {

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Foto").setValue([1]) of control. "

  }

  if(CFoto.Value == False)

  {

  "projectItem("Salida_Ventana_Asterix").layer ("_Control").property("Effects").property (v2").property("Foto").setValue([0]) of control. "

  }

  }

  ACCION BOX FOTO

  CWipper.onClick = function)

  {

  if(CWipper.Value == true)

  {

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("Wipper In").setValue([1]);

  }

  if(CWipper.Value == False)

  {

  projectItem("Salida_Ventana_Asterix").layer ("_Control") .property ("Effects").property("Control_v2").property ("Wipper In").setValue([0]);

  }

  }

  ADD TO RENDER QUEUE

  rendaBtn.onClick = function)

  {

  var QTtemplate = "Lossless." Select el model

  salt1 var = projectItem ("_Render Salida Ventana Asterix"); Search the model that will has Renderizar por su number

  var newPath = ('Salida Ventana Asterix');  Este are el number del path knew the asigna para salida to

  If (salt1! = null & & salt1 instanceof CompItem) {}

  var theRender = app.project.renderQueue.items.add (salt1);

  If (salt1 == salt1) {}

  theRender.outputModules [1] .applyTemplate (QTtemplate);

  theRender.outputModules [1] mpfprojectdir\dev10\src\csharp\projectbase.file = new queue (newPath);

  }

  }

  }

  break;

  //DEFAULT CASE                                                                                                                                    ---------  DEFAULT CASE  APAGA TODO  ---------

  by default:

  myPanel.grp.groupTwo.visible = true;

  myPanel.grp.groupThree.visible = false;

  myPanel.grp.BtnGroup.visible = false;

  myPanel.grp.groupFour.visible = false;

  myPanel.grp.groupRender.visible = false;

  myPanel.grp.groupChecker.visible = false;

  myPanel.grp.groupTwo.imageDemo.image = imagePath1

  AL HACER CLICK IN THE IMAGEN MANDA UNA ALERTED

  myPanel.grp.groupTwo.imageDemo.onClick = function)

  {

  Alert ("Primero debes seleccionar una opcion del Menu drop-down. ADVERTENCIA esto solo con works the paquetería of channel 5. \

  ("If need more information you can consultarlo con www.estudiovoraz.com");

  }

  break;

  }

  }

  ACCIÓN PARA EL ESTUDIO VORAZ LINK

  BtnURL.onClick = LinkToURL;

  function LinkToURL()

  {

  alert ("http://www.estudiovoraz.com");

              var URL = " http://www.estudiovoraz.com "; your web page

  If ($.os.indexOf ("Windows")! = - 1).

  system.callSystem (winBrowserCmd + "" + URL);

  on the other

  system.callSystem (macBrowserCmdStart + URL + macBrowserCmdEnd);

  }

  FUNCION WHAT TODOS LOS OF THE INDEX OF THE ITEM PROJECT DETECTA Y IN ASIGNARLE LUGAR DEL LO DETECTA POR SU NUMBER NUMBER

  projectItem (name) function

  {

  var items = app.project.items;

  i = 1;

  While (I < = items.length) {}

  If (items [i] .name = name)

  {

  Return app.project.item (i);

  break;

  }

  i ++ ;

  }

  }

  END PANEL - NO PONER NADA ESTA LINEA ABAJO.

  Return myPanel;

  }

  var myScriptPal = myScript_buildUI (thisObj);

  If ((myScriptPal! = null) & & (myScriptPal instanceof window)) {}

  myScriptPal.center ();

  myScriptPal.show ();

  }

  }

  myScript (this);

  }

  OK, apparently it does work well with panels, because even if the height is 0, something is from the Panel...

  You can try the panels inside the packing groups. It will start to be a little heavy, but it works.

  Here's a toy example to illustrate:

  var w = new Window("palette", "test");
  w.content=w.add("group{orientation: 'column', margins: 0, spacing: 0,\
                                  alignment: ['fill', 'fill'], alignChildren: ['fill', 'top'],\
                                  gr1: Group{orientation: 'row', margins: [0,5,0,5], spacing: 10, alignChildren: ['fill', 'center'],\
                                                  titleST: StaticText{text: 'Option Level', alignment: ['left', 'center']},\
                                                  menu : DropDownList{properties: {items: ['0', '1', '2', '3']}},\
                                                  },\
                                  gr2: Group{orientation: 'row', margins: [0,5,0,5], alignChildren: ['fill', 'center'],\
                                                  content: Panel{orientation: 'row', margins: [5, 10, 5, 5], spacing: 0, alignChildren: ['fill', 'center'],\
                                                                      text : 'Option 1',\
                                                                      menu : DropDownList{properties: {items: ['A', 'B', 'C', 'D', 'E']}},\
                                                                      },\
                                                  },\
                                  gr3: Group{orientation: 'row', margins: [0,5,0,5], alignChildren: ['fill', 'center'],\
                                                  content: Panel{orientation: 'row', margins: [5, 10, 5, 5], spacing: 0, alignChildren: ['fill', 'center'],\
                                                                      text : 'Option 2',\
                                                                      menu : DropDownList{properties: {items: ['A', 'B', 'C', 'D', 'E']}},\
                                                                      },\
                                                  },\
                                  gr4: Group{orientation: 'row', margins: [0,5,0,5], alignChildren: ['fill', 'center'],\
                                                  content: Panel{orientation: 'row', margins: [5, 10, 5, 5], spacing: 0, alignChildren: ['fill', 'center'],\
                                                                      text : 'Option 3',\
                                                                      menu : DropDownList{properties: {items: ['A', 'B', 'C', 'D', 'E']}},\
                                                                      },\
                                                  },\
                                  gr5: Panel{orientation: 'row', margins: [5, 10, 5, 5], spacing: 10, alignChildren: ['fill', 'center'],\
                                                  text : 'Commands',\
                                                  btnA: Button{text: 'A'}, btnB: Button{text: 'B'}, btnC: Button{text: 'C'},\
                                                  },\
                                  }");
  w.content.gr1.menu.onChange = function(){
      // set visibility of options groups (gr2 to gr4)
      var x = this.selection.index + 1;
      var k;
      for (k=1; k<=3; k++){
          w.content.children[k].maximumSize.height = x>k ? 1000 : 0;
          };
      w.layout.layout(true);
      };
  //==============================
  w.content.gr1.menu.selection = 0;
  w.show();
  

  Xavier

• HP Laser Jet P1102 wireless linux OS... ?

  How can I set up a wireless HP Laser Jet P1102 printer to work with an OS linux.. ?

  Dave

  DWArveyess,

  This site should help with drivers and install:

  http://hplipopensource.com/hplip-Web/index.html

  Good luck!

• When I give a print, only blank page comes my printer is HP Laser Jet P1102

  When I give a print, only blank page comes my printer is HP Laser Jet P1102

  Hi aremps,

  1 did you changes to the computer before the show?
  2. what operating system you have installed in the computer?

  This problem can occur because the print settings cartridge. Check your ink cartridges to see if you are out of ink. Refer to the printer manual for settings and troubleshooting.

  Please select the operating system and follow the instructions to solve the problem:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&DLC=en&LC=en

  Please report if you are still having the problem. I will be happy to provide you with additional options.

• IHAVE hp laser jet p1102 and hp laser jet1020

  IHAVE hp laser jet p1102 and hp laser jet1020 and ihve macbook air iwont software for printers thank u

  Here is a link that will provide you with the software and the driver for the LaserJet P1102.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=219&LC=en&cc=us&DLC=en&sw_lang=&product=4110304#n190

  Sorry, the LaserJet 1020 is not compatible with the Mac software.

• laser jet p1102: survey

  How do I know when I need ink or ink level?

  Hi @eslam_shehata,

  Welcome to the Forums of HP Support!

  I understand that you are looking for information on how to check the level of ink for your printer HP Laserjet P1102. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Here are a few ways to check your printer ink levels.

  • Please download and run the print and Scan of the doctor, it displays the ink levels.
  • HP LaserJet Pro printers - print a configuration or State Page

  Print a Configuration page

  Use one of the following methods to print a Setup page.

  Method: Print a Configuration page from the printer driver

  1. Open the Printers folder.

• power of incompatibility input (laser jet p1102 pro hp)

  Hello

  I bought a printer p1102 considering that it will work for 110 ac and AC 220 but when I tried to install the CA 220-240, 50/60 Hz wrriten system on the back of the it. Is it posible that it will work on 110 AC because my current environment doesent supports 220 AC

  Based on the technical specifications, there are two type of difference in the model:

  MODEL specification 110 volts 220 volts

  Power supply requirements	115 to 127 V (+/-10%)

• My printer print 2 Facer habit any more laser jet P1102 hp

  I'm running Mac os x 10.8.2 and until there is about 3 weeks, I was able to print double-sided (manual feed) I would get a little pop box telling me to push go once I put the 1 series of documents that came the printer threw it into the tray to paper to begin the second side.

  I get MORE than the box more and now nothing will print 2 sides because of this, the printer says he's waiting for me, but no. box *.

  Normally, I have to print PDF slides for the school with 100 + slides by chapter, so I use slides mutiple by option of the page and use the front two but now nothing will print 2 Facer. Not even the Pages, or text editior will print on 2 sides, due to the printer "pop up box" just never came up. Help, please

  I tried to delete the printer, adding the printer again, update drivers, I even restored my count to an earlier saved version of the Jan 4. I'm willing to try anything at this point and I ran out of my own ideas.

  On another forum, someone suggested opening and closing of the compartment of toner instead of press 'ok '.

  Low Tech, but maybe it will work.

  HGW

• HP Jet P1102w laser: find IP address of HP P1102, WiFi Internet connection

  It is the step of forst at e-printing or remote printing. But first the printer must obtain an IP address.

  It's hopeless.

  The printer is 1 meter form the router, which extends WiFi autour, with the access code.

  Device configuration page says:
  Status = not connected.

  IP is 0.0.0.0, of course.

  Manual said to go to the windows start page and run the HP application.

  However, it's for Windows 7.

  In windows 8, I do not see any app to launch and control my printer.

  Reinstaling of CD does not help.

  Time already invested in this theoretically simle question to print via wifi is too already!

  What to do to see: connected! and see the IP address?

  Hey, big progress. Now I can e - print from my Mac.

  I said, the struggle for the IP address was a step toward printing of my Mac.

  Now the printer is conectrd to a PC with Windows 10.

  The Mac is remote and I managed to: get the IP address and the code for the printer and print my first page via e-print now!

  Even better would be to print directly via wifi.

  Not required but wishful.

  W