Inspiron 1545 Webcam not found in Device Manager

Similar Questions

• Satellite A300 PSAG4A: Webcam not detected in Device Manager

  I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
  The webcam is not working and it is not detected in Device Manager.
  When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

  The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
  However, I hope that this is a setting that I can fix myself.

  I had restored the laptop to factory also and I've updated the bios.
  I tried to uninstall all the USB controllers and reboot the PC.

  Is there something I can do?
  It's maybe a software problem?
  There may be a setting?

  Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

  So if cam still doesn't work properly, I fear that there is a problem with the hardware.
  It cannot be matter of software because the recovery image contains the driver for the cam.

• Dongle not found in Device Manager

  I bought msi cr620, n installed windows 7. Problem is I can't find webcam in device manager, n when I try to find drivers online, I met that she uses the necessary drivers to the operating system. If anyone can help, thanks

  Hello

  Check with the MSI Support, their documentation and online drivers.

  Support MSI
  http://www.msi.com/index.php?func=service

  MSI - Downloads (drivers and BIOS)
  http://www.msi.com/index.php?func=downloadindex

  MSI - Forums
  http://Forum-en.msi.com/

  MSI - Service
  http://us.msi.com/index.php?func=service

  MSI - Live Update online
  http://www.msi.com/index.php?func=downloadindex

  MSI - Contacts - USA - North America value
  http://www.msi.com/index.php?func=HTML&name=aboutus

  ============================

  If the system and the camera will run on Windows 7 and Windows 7 drivers for the camera.

  Vista references apply to Windows 7.

  You probably need to recharge the device drivers and any software control of the'IF' camera, there is
  everything for Windows 7.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No sound. Audio device not found in Device Manager.

  Original title: where no sound is

  I can't install audiodrivers for msi ms-7267 VER: 5.0 mainboar. I had tried to unistal and install again, but he can not yet found on legacy manages the window.

  What should do? I have no sound?

  Best regards, Modestas

  Hello

  Step 1: Run Microsoft fix it. This automatically the diagnosis and repair of problems with devices when Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click on this link to run the fix it: http://support.microsoft.com/mats/hardware_device_problems/en-us

  See also: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/sound-cards-frequently-asked-questions

• Treo 800w not found in Device Manager and does not connect to ActiveSync

  I just got my Treo 800w and I have ActiveSync it once.  After that, I had a lot of trouble trying to get activesync to say that it was connected to the computer.  After doing some research on Google and help forums looking around, I discovered that the Treo should appear in my device manager when you are connected to the computer.  I went to my device manager and of course, it wasn't there.  After a lot of time trying to make it work, I found that the best thing to do is remove the battery and plug it in again.  Then the computer will find again.

  However, I also learned what was causing my problem and I don't know if it's a windows or a problem of palm, but it is a question.  If you connect a Treo 800w on a WinXP (I don't have Vista so I don't know if this problem exists) and even if you touch it connected the power button on all Windows POPs a message saying a USB device has malfunctioned and will cease to recognize the device.  I then told my wife (the main user of the Treo) to never touch the power button and even less the Treo at all while it is plugged into the computer.

  If this question has already been posted... I'm sorry that I'm not looking for it...

  If you read my entire post it says I already found the solution.  Try all the things you listed didn't work for my problem.  I write only because I believe that it is a bug/problem with palm or windows and the device.  Take the battery, put the battery back in, and reconnect the unit is the only thing that works.

  I also tried to uninstall ActiveSync, reboot, install ActiveSync and the battery... it works too, but it's much faster to just remove the battery then put it back and reconnect the device.

  To answer your other question on ActiveSync Yes, I've got 4.5.

  Message is about: Treo 800w (Sprint)

• Satellite A500-17 x - wifi does not work - not found in Device Manager

  Hi people,

  I need help please.

  My wireless adapter does not work.
  It worked perfectly until I connected to a wired connection in a hotel I was staying in and since then I can not connect to my wireless router.

  I tried restoring the tosystem several times to old dates, but it has not solved the problem. When I restart the computer laptop and go into devices and printers, I thought that the computer needs to be troubleshooted.

  The program runs and try to install the driver for the Wlan but returns with errors. Namely, windows could not load the driver or can verify the digital signature.

  There is also no icon in the network for lan wlan connections only. When I use the radar in connectivity doctor tells me that the WiFi network is disabled but I can't understand how to activate it.

  When I start in safe mode and go to Device Manager I see the wireless network adapter, but when I try to install the driver I leave safe mode and restart. I did and then the WiFi network is displayed in the Device Manager but when I try to load the driver, I thought that the driver is updated and then the adapter disappears from the Device Manager.

  I'm so frustrated at this point and I'm very close to a full erase and start over.

  I also tried to reload and load the default configuration settings in the installation program, but didn't make any difference.

  My laptop is a Satellite A500-17 x with windows 7 64 bit.
  The WiFi network is Realtek RTL8192E Wireless Lan 802.11 PCI - ENIC

  Hello

  Go to BIOS (press F2) and set it to default settings.
  Save the changes and restart the device.
  Then try to reinstall the WLan driver again.

  If that does not help, download the most recent and updated BIOS to BIOS first day.
  Then, restart the device and try reinstalling the Wlan driver.

  Last but not least you could test the WLan feature on laptop running with factory settings current (after using the Toshiba Recovery)

  PS: in order to use the WiFi network you must use the FN + F8 key combination and must turn on the WLan (in front of the laptop) switch to position.

• Re: Tecra M11 - 15W - Parallel Port LPT1, not found in Device Manager

  Hello

  I have Tecra M11 with PA3680E-1PRP Docking Station. BIOS Version 2.9.

  Problem is, I want to use the Parallel Port LPT 1, but in anchorage additive dosent device manager there.

  Thanks much for the tips

  Hey Buddy,

  What device is connected to the LPT1 port? Usually if you connect a device to LPT port and you turn on you will be asked for drivers. AFAIK the LPT device drivers must be installed before connect you.

  Several years ago I also used LPT connection for my printer but one day it didn't work. The problem was only a defective cable. I replaced it with a new one, and then the connection to the printer has been recognized again correctly! :)

• Connect a camera, camera not found in Device Manager? -Updated!

  I've had problems with my camera for a few months now. Yesterday, I got fed up and took off all my files and reset the computer. When I open the camera it worked for about a second, then come back onscreen "connect a camera". I use an ASUS Q200E with a built-in webcam. Given that I have restored the laptop, I was using windows 8, and when I tried to install updates before installing 8.1, which took an hour or two, they failed.

  When you go to the ASUS site I can't find a driver of webcam 8 windows (or 8.1). I tried for hours to find a.

  Told me the troubleshooting of hardware and devices that "material changes may not have been detected.

  I followed the steps for the option in the BIOS, but when I got to the stage where I had to find the configuration of the system, it was not there.

  Any help would be greatly appreciated, I'm getting very frustrated with all these questions about a freshly delivered to zero laptop.

  UPDATE: I installed all available updates finally. When I open the camera app, I was able to use the webcam and take a picture of me. However, when I moved my computer on my lap the webcam has stopped working and I had returned to the page "connect a camera".

  Is this a hardware problem?

  Hi EmmaAyubi,

  While the webcam is running for a few seconds, it stops working when the laptop is moved, there is a possible connectivity problem. Please, contact the ASUS technical support and see if they can help you with this.

  http://VIP.ASUS.com/Forum

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• Re: Unable to use webcam - not found in the Satellite L670 Device Manager

  Hi, I'm french, sorry for my English.

  I can't use my webcam. not cam in Device Manager.
  I have download the latest drivers and it installed.
  I looked in the bios, cam is on, I am trying to turn off / restart / turn on. Updated BIOS updated.
  facial recognition work to, say "use by another program or not found" something like that.

  Can you help me?

  Thank you

  Hello

  It s not recognized in Device Manager?
  You have a few unknown devices in Device Manager?

  The webcam should be included under point: imaging devices
  You should see peripheral USB video.

  You see that?

• Webcam does not appear in Device Manager

  I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam.  YouC'm software was bundled with it and worked.  Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...

  I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which?  If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.

  Hello world

  I have windows 7, in the balk suggestion you type cmd

  then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.

  Greetz

  Steve

• I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  Hello

  ·         What is the brand and model of your laptop?

  Method 1:

  Try running the fixit from the link next and if it helps: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Try to update the drivers for your webcam and check if it helps: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

• not found boot device. Please install a drive of system.hard of operation (3FO) past all the hard drive test

  not found boot device. Please install a drive of system.hard of operation (3FO) passed all the test drive I get this message after the recovery disc 1 stops at 36% and tells me to put in disk 2, I just discovered that my grandson was trying to help me by resetting my computer from factory settings off he thinks about 27% complete , it is only 8 and just trying to help this computer is only a few weeks was a Christmas gift its my fault for complaing about windows 8, can someone help me please thanks in advance

  I solved this problem myself thanks all syudents there to post what you've tried I went to bios and disabled the startup enabled legacey mode sucure tried to go to the Boot Manager it was my boot devices tried to use recovery disc recived the same message I have reset to factory settings and was able to reinstall windows normally

• PA: Uninstalled my webcam drivers and now webcam is missing from Device Manager

  Hello

  I had trouble with my webcam I decided to uninstall the driver to try reinstalling one from scratch.

  The problem is that now my webcam is still not displayed in Device Manager, so I can't access its settings to try to update the driver.

  It was a very stupid thing to do, and now I don't know what to do...

  Thanks in advance!

  Cecilia

  Hi Cecilia,.

  Unless you have already done, the first thing I would say is just to reboot the laptop and see if Windows RE-discovered the Webcam and load a driver for it.

  If this does not work, try to run the system restore to return the machine to a point in time before that you deleted the windows driver - see Option 2 below.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html#option2

  Kind regards

  DP - K

• CD/dvd drive is not listed in Device Manager

  my laptop is a hp pavillion entertainment pc dv6605us, running windows vista. the cd/dvd drive is not read / write any CD and it is not listed in Device Manager. I tried to fix this problem by using the microsoft fixit tool, but I'm still having the same problem. I checked the system registry and found no upperfilters and lowerfilters.
  Please, how can I solve this problem?

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista
  After starting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.