Inspiron 1750 lcd cable

I bought a new lcd cable for an inspiron 1750 that does not display on screen, but displays correctly when an external monitor is connected to the vga port. The screen light up (backlights). Now that I installed the new cable, the display on the laptop is not even light to the top more.

My question is, "what is the difference between, or is there a difference between the part # G600T, 0G600T, 50.4CN05.101 and G600T, 0G600T, 50.4CN05.001." My old cable number is the last, and the one I bought is the first. Could it be the problem? Help, please.

The cables are the same - so assuming have not two cables defective (unlikely), it is much more likely, that the motherboard itself is defective, not the cables - assuming that the LCD is working (to check this, hold down the key of D through power until you see in alternation of solid - color screens if you get that far the screen is OK).

Tags: Dell Laptop

Similar Questions

  • My network card on my Inspiron 1750 has stopped working suddenly.

    My network card on my Inspiron 1750 has stopped working suddenly. I left the computer, while I was working online, went for about 2 hours, and when I came back, I wasn't online more. I can't reconnect to the internet. I was on the phone with the cable operator for two hours Tuesday night, and they said that I probably need an updated adapter. My computer tells me it is good, but then again, I can't connect to the internet to check. I tried an ethernet connection, but it is not recogniziing either. What should I do?

    Hi Joyce,

    Thanks for posting your query in Microsoft Community.

    I understand from the description of the issue that you are facing problem with Internet connection in Windows 7. I will certainly help you in this matter.

    Were there any changes made to the computer before the show?

    Please follow the steps in the link.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Using the windows-related issues feel free to post on the Microsoft Community Forum.

  • Tecra 8100 did poster need nothing on LCD - LCD cable

    Hi, my Tecra 8100 13.3 "laptop does not display anything on the LCD screen. It works with the VGA. I'm looking for a LCD cable for this laptop. Any body know where I can buy one. Any body know what is the part number FRU for this. Not the cable of the LCD screen for this model and other model is different?

    Aryabhatta

    Hello

    You will be very happy if someone has so much information for you. In my opinion, you should check if you can find the same parts and don't forget that you can exchange it. Tecra 8100 is about 6 years old and find new parts can be difficult.

    I put t know which country you live but try to pick up a few pieces of notebook offering online in your country. Second option is to check eBay. From time to time, you can find there defective laptops, but many pieces can be used for replacement.

  • Equium U400/146 - I need a replacement lcd cable/Ribbon

    Hello
    Please help I have searched for days.
    I need a replacement lcd cable/Ribbon. Identification number (DDOBU2LC000)

    My laptop is Toshiba Equium U400/146 PSU42E-00400SKS model number. Sound off out of warranty, so I took it to
    my local repair shop, but they could not get the part. The problem with the LCD is that it starts in green
    I can still use the programs, the grays and whites shine through.

    When it is connected to a crt monitor, the laptop is fine. Return to the cable, the screen number is REC-NI3311-LOL. C1

    If someone could point me in the right direction for this part, I would be most gratefull

    Thank you

    Hello

    All laptop parts can be ordered from the local ASP (certified partner).
    I think that guys should be able to order this cable/Ribbon.

    Here you can find the database with all FSA worldwide:
    http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

    Good luck

  • Versions of Y500 lcd cable

    Hello

    I have a y500 lenovo with HD (not Full HD) screen and the LCD cable is broken. The service seems to have no cable in stock so I decided to buy it on the internet. After looking at the number of RUF in the maintenance manual, I found only fru in the manual for the LCD cable. Does that mean that the same cable works for both HD and Full HD? What is the DC02001ME0J cable itself has two versions? As in ebay all sellers say in the description that this is for the HD or Full HD.

    Thanks in advance.

    Hi aakmel,

    Well Yes, posted a false image, it is the Y500, on the next page in the Manual:

    the manual makes no difference that I could find on HD or Full HD, so it must be the same cable.

  • HP Compaq 610 laptop computer lcd cable

    Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX.   Sorry for my English...

    K_Szabi wrote:

    Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX.   Sorry for my English...

    Hello

    You can buy a complete kit under this part number: 538463-001

    http://www.lambda-Tek.com/538463-001-HP-SPS-LCD-cable-kit~CS/B569917&viewSpec=y

    Useful information be found here as a way to replace it etc...

    http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=3958407&targetPage=http%3A%2F%2Fbizsupport2.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc01787889%2Fc01787889.pdf

  • Laptop Inspiron 1750 with Windows Vista. Windows 7 upgrade query

    Hello. I bought a laptop computer Inspiron 1750 in Nov 2009 with Windows Vista. Now, I need to upgrade Windows 7. Would I get a free window upgrade. Reference Dell provides a free upgrade? Thank you

    That the system was sold after the release date of Windows 7 and you should have had Windows 7 pre-installed... otherwise you were entitled to a free upgrade... were, however, intends to take advantage of it between 2009 and 2010.

    Dell Windows 7 OEM System locked preinstallation work on this model should however you have Legacy BIOS revision A06. See here for more details:

    http://dellwindowsreinstallationguide.com/Windows-7-SP1-ISO-download/

    After clean installation Windows 7 OEM with system drivers, you should immediately perform an inplace upgrade to Windows 10 using the tool of creation of media:

    http://dellwindowsreinstallationguide.com/upgrading-to-Windows-10/

    The free update from Windows 7 to Windows 10 is only available for the next 10 days.

  • E6420 - Bios A07 - false positive diagnosis - Lcd Cable

    Hello world!

    I found a weird bug with update bios A07 on the E6420 (i5 - 2520 m). The utility disgnostics report "error Lcd 2000-0415. When I return to A06, the problem disappear.

    Anyone can repeat this mistake? I had opened a case to replace my lcd cable and I will contact Dell to cancel the replacement of the cable. But if no one can repeat the problem may be that the cable is really damaged and better A07 bios detects it.

    I have no problem using the computer.

    Thank you.

    There is a long and a short version of this... As I understand it, Dell has implemented a change to the hardware level allowing the cable test for the work they have released newer versions of systems and enabled in the BIOS.  For systems with the old cables, it always generates a false positive.  It is not an error in the BIOS, it's just this test is not supported by the hardware you have.

  • Dell Inspiron 1750, Windows 7: HL-DT-ST DVD +-RW GT10N not working after critical updates from MS

    I'm having a problem with my Player DVD - HL - DT - ST DVD +-RW GT10N.  I have a Dell Inspiron 1750, Windows 7.

    It was working fine, then after 3 critical updates from MS, it stopped reading/writing on the DVD player.  The only way I can access the DVD (read or write) is to restart.  A subsequent loading of different or even the same DVD finished with the issue of not being able to recognize the DVD.

    When I click on the properties of the DVD drive in Device Manager, it clocks.  However, after a reboot, the properties has worked well and said that the driver does not work properly.

    I got to the period before 1st update was installed and the DVD player worked as before.  However, Ms. downloaded the same (I assume) updated critical shortly after.  Low and behold, the DVD player does not work yet.

    The MS CD/DVD patch could not fix.

    I also tried UpperFilters/LowerFilters regedit deletions, but it is impossible to find these entries (http://support.microsoft.com/kb/982116 > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}).  Thank you Osprey4 for your help continues.

    I hope someone can help me.

    Thank you

    Duane.

    Open Device Manager, right-click on the component, and then select uninstall.

  • Which LCD cable for laptop HP DV7 4020sa

    Hi, I have a difficulty to determine which cable I need for my computer HP DV7 laptop 4020sa.

    The serial number of the device is {content removed}, and the LCD cable has a tag with "replace with HP spare...". 605324-001 "and"7F1074"below.

    I tried speaking with HP direct and received the wrong information about the part I need. They said that I needed part number 71CI0832001 with 480449-001 below.   I bought this article and concluded that, although the two are cable of the lcd screen, they have completely different connectors.

    Either way, the cable must be replaced because he was stuck against the leg that is used to tighten the body! It has generated a huge amount of heat and melted the paw and burnt the cable!

    If anyone has any information, I would be very grateful, and it can restore my very low opinion on defects of HP and very poor customer relations

    Thanks in advance

    Steve

    I did some research and according to your maintenance manual, the part number is 605333-001, look on page 72.

    http://h10032.www1.HP.com/CTG/manual/c02642701.PDF

    Yours is an LED screen and there is no ups, so the cable will be thinner then the person using an inverter.

    Here is a picture of e - bay for reference.

    http://CGI.eBay.Ph/WS/eBayISAPI.dll?ViewItem&item=300486312385

    It is also strange that when I googled the part number which is on your old cable he refers to all of the LED screen.

    If you look on page 68 of the manual it mentions that part number 605324-001 is a replacement of the screen.

    The they gave you is for a backlit display for a CCFL lamp with and the inverter.

    http://www.impactcomputers.com/480449-001.html

    http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=08568760B8124A33B9679669BA127BE9&SearchIn=PartNumber&SearchPN=605333-001  It should be correct.

  • Satellite L665D - No POST after LCD cable Strip

    I have a Satellite L655d S5550 and a few months ago, it has no video after a break caused by the process of closing LCD I've ever done.

    After her, I try:
    a power draining
    turn to the memory of RAM slot
    Turn on with just a memory
    Odd and band and reaset hdd cables
    Clear CMOS

    None of this works, the computer displays leds and its hard drive, cooler works normally but still no video.
    I forgot for a couple of months so I try to fuel once and 2 times it displays video normally, but after the third time without problem the video returns.

    After it, I opened the laptop and with it under tension, I did strip the cable of the LCD of the motherboard, then the system closed immediately.

    So, since it does not supply the computer power with or without baterry.
    The power led flashes and don't fill POST heatsinhk does not work.

    Any idea? I fear it's a motherboard burned, because I am of the Brazil and there is no replacement for it.

    I think that there is a hardware problem but from my point of few Interior/LCD display isn t the troublemaker.

    The point is that even if the internal screen would be defective, the laptop must turn on correctly and in an external monitor, it should be possible to use the laptop.

    For me, it seems that the motherboard or card mother as GPU (graphics processing unit) could be faulty.
    This malfunction is a worse because the replacement of the motherboard is a very expensive procedure and I think that it s not worth to fix it in case the warranty isn't valid more.

  • Satellite A500 - new LCD cable

    Hello

    My Satellite A500-13f laptop got his damaged cable lcd and now I need a new.

    When I went to tech support, they said they found itself without a reference number on this issue, and they need the number of the room as well as the model number to make me a new cable of the LCD.

    apparently even model laptops are sometimes with different lcd screens and so different video cables

    My laptop is the exact same in this [page | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?DISC_MODEL=0&ACTION=PRI NT_WITH_BACK & service = EU & PRODUCT_ID = 1070219]

    {color: #000000} so can you help me with the number please?
    {color}

    To be honest I don't understand the problem. Toshiba service can identify the right display and the cable for your laptop model. They can find this info in the Toshiba database so I put t understand why you need to find the part number for the service.
    > When I went to technical support
    Is - this Toshiba technical support?

  • Inspiron 5100 - LCD Inverter and BIOS

    Hello

    Is it possible to disable the detection of inverter LCD in Bios Dell Inspiron 5100 A32?  The backlight or inverter is trashed - my computer running only with the possible brightness setting the lowest (if you set higher, the screen will turn completely black until reset is performed).

    I want to make the main display a source external VGA, but the system keeps crashing, or since I unplugged and removed the lock screen - diagnosis gives a FAILURE when it reached the LCD inverter.  I guess that's the problem.  I tried to reconnect the ordinary LCD, but it is still giving me grief (lock up during startup, has not detected the same and external VGA is locked in safe mode).


  • Equium U400-145 - part number for the LCD cable

    I have a Toshiba Equium U400-145 (series 88102623W). The display acted during the last two weeks by going all blurry with a sort of static green.

    When I move the front cover and back it corrects sort of himself. I am out of warranty and used to be a satellite for the Navy engineer, so I know how to fix the printed circuits, etc. (in other words), that I felt competent to investigate). I found that there is a cable near the left hinge that if I push it sideways slightly corrects the flaw of the screen. If I let go he returns to the 'fuzz '.

    The problem is that explaining that parts team left me a little frustrated because they could not decide if it was one of these two part numbers: A000020640 or A000022790.

    I'm inclined this is the first judging by their description of the element (thick cable that leads from the motherboard), but I was wondering if someone could possibly shed light on this for me?

    Thank you

    VJ

    Hello

    I understand your problem very well, but if they can't help you even that they can identify and check the Toshiba database how we can help you on this forum users?

    Have you contacted Toshiba authorized service provider in your country?

  • How can I fix a problem with my Dell Inspiron 1750 internal speaker?

    I started having problems with the internal speakers on my Dell 1750. Everyone knows about this problem? Is there a solution?

    Hello

    For hardware problems, you will need to contact the manufacturer of the computer. Here is a link for your convenience.

    Dell Contact technical support: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&cs=19&l=en&s=dhs& ~ ck = mn

    Concerning

Maybe you are looking for