Recovery of satellite m30x-155 DVD would not start

Similar Questions

• Liquid fell on my Satellite M30x - now it does not start

  Hey there,

  yesterday, some orange juice fell on the side of my toshiba M30X laptop.
  Immediately, he came out. I manipulated the laptop carefully, she held so that some of the juice could go out again, then I tried to dry near the heating.

  Now: there's a light running, when I try to put it, but after 5 seconds it turns off again.
  So is there anything I can do? Is is useful to try to get their hands on the hard drive?

  I know it was my mistake with the juice, but I would be very thankfal for each tip that you can give me!

  Thank you very much
  Kurt

  Something like that happened to my girlfriend some time ago.
  She spilled a coke and the closed laptop.
  It was not possible to turn on the laptop. I have noticed the same behavior.
  The LED was on but the laptop didn't start up.

  Finally, laptop technician found one of the memory modules was defective because of the liquid in the Bank of memory.

  After the replacement of the laptop starts fine.

  Maybe my story might be useful for you!

• Satellite M30X-155: is he ready WLan?

  Hello, I wanted to know if my Satellite M30X-155 is ready wireless, and I can simply plug in the mini PCI WLAN card. I have some experience as a service person, but I don't want to open my laptop so ther in any already built on air.

  Greetings...

  Hello

  Just reply: no, the WiFi network is not available on your device.
  In this case you must use an external solution such as a USB WiFi key.

• Satellite A - USB issues and would not start

  It started with my computer (laptop) from freezing. Then my USB mouse leave, make me use this tablet (I hate that seriously), then the computer would not simply start so I removed the battery, the computer starts, and then it froze again, put the battery back in, computer started again. Things continue to go.

  Today, I got the Toshiba (my baby) at Staples (free checking up), they found nothing wrong. Got home, starts very well - the 1st time, I tried to reinstall my USB mouse and quess what - would not start. Out the battery, and here we are.
  Oh and by the way - I would like my rear USB mouse - I said "I hate this tablet.
  Battery has been for about 2 hours now without any problems

  Can anyone HELP?
  Thank you

  What computer Satellite phone do you have?

  Have you tested without USB mouse? Maybe this is causing the problem.

  And have you tried a BIOS update? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

• Satellite A660/0MR - upgrade after RAM, Windows would not start

  I have expressed in this thread: http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=228520#228520
  But having a slightly different model (A660/0MR). Same question.

  Improved from 4 GB to 8 GB. He would not accept any 4 GB sticks at all (I tried 4 different 4 GB sticks in all - all of the correct sticks) and operation in other machines. BIOS would recognise them, the BIOS is the latest version (1.80), but windows would not start.

  Any suggestions?

  Hi Farreg,

  What new RAM modules you tried exactly?
  Is it pretested module RAM Toshiba from an authorized service provider?

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Uninstalled emet but after the applications would not start.

  Uninstalled emet but after the applications would not start. Internet Explore tries to start but flashes and disappears, even with Excel. Word starts but gets an error when you try to save. Lucky got Google chrome from another pc and installed so I can at least access the internet. Reinstalled Explorer, office repaired, cleaned the registry, but still no start. What should I do?

  A moderator has moved this thread to the programs Windows of Feedback Forum Forum.

  tried, nothing worked so I uninstalled office and re-installed from disc. Explorer 8 still does not work, but I uninstalled a with explore 7 updates and automatic update started and explore 7 worked. Thought I'd try installing explore 8 new. It worked, even if it failed with the Download Manager. Now all back to normal. I would be careful about the use of EMET, unless you know exactly what you are doing. Not a lot of faith in either the Download Manager.

• My Live View would not start or start...

  Had this problem until I saw all of a sudden screen cleared and I could not start no matter how hard I pressed the buttons. In order to reset I took it to the store I bought. The display took the piece and after almost 2 days he returned saying that COMTEL would not cover up for accessories. I called the service center and asked how when offers a limited warranty, they are supported. This gentleman had no answer, but that he would accept neither of my room. Instead he suggested me to get a replacement from the store, I bought. As we were talking about the issue, the display has tried to load my mode live view and the red light on to my great surprise, which indicates that it worked. Then he started to initiate and work. When I got home, I got to know the mode Live View has had an update, I did. 2 months after there was no question too... But still today, after a full charge, it would not start again. I tried to plug into my laptop to update the software, but my laptop indicates that the USB malfunction, indicating that the Live View mode is a.

  I don't know what to do... I love my Live View... Its great use while driving, on a session and in places outside, where the silent noise your cell phone ringing...

  But, I think that the problem starts, if we have to charge the unit. Which could be considered if you are developing a software update for the same.

  Sorry to be too eloborate... Thank you for your time.

  First of all - welcome to the forum!

  Where are you from and how old is your LiveView? All the accessories are getting 12 months warranty on most of the markets (6 months in some markets).

  It might be that the service contracted by your dealer Center isn't HVC (high volume Center). They should, however, help and if so send the LiveView to a service center that allows to fix it.

  You can try to contact local support Office and ask for a service center that can fix your LiveView.

  Click on this link: http://www.sonymobile.com/gb/support/contact-us/

  Be sure to choose your country in the drop-down menu for the displayed correct phone number.

  What do you think on this forum? Let us know by doing this small survey.

• Installation of 12 elements PShop DVD does not start, no autorun.exe

  New installation of Photoshop elements 12 DVD, will not start. It IS in a DVD player, and Win Explorer shows no Autorun.exe, as suggested in the troubleshooting information.  What should do?

  You can download a trial version and activate it with your serial number http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

• Satellite A110-293 Windows does not start at the top. Ntoskrnl. No recovery CD

  I have a Toshiba Satellite A110-293 with Windows XP. I've upgraded to Vista a few months ago. One day, I turned on my laptop computer and got the following error message:

  + "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem: +.
  + 1. Insert your Windows installation disc, and then restart your computer. +
  + 2. Choose your language... +.
  + 3. Click on "repair your computer".
  + If you do not have the disk, contact your computer manufacturer or the system administrator for assisstance. +
  + File + ntoskrnl.exe
  + Ststus: 0xc0000098 +.
  + Info: Windows failed to load because a required file is missing or corrupt.

  I do * not * have my original CD or Vista Upgrade DVD, because I'm a foreigner for a few months.
  I tried to get a CD of restoration via the website (https://backupmedia.toshiba.eu/serial.aspx), but he said:
  + "Your device no way recovery can be ordered, because he is not from the area of Toshiba Europe, or he is too old for this service." +

  Help!

  Hello

  I presume that you can order only the latest Toshiba Vista recovery DVD using this from Toshiba Web site.

  If you need a recovery (Win XP) for this older satellite series CD, then you will need to contact the ASP (authorized service provider) in your country.

  However, you can use a Microsoft XP CD to the original address to repair or reinstall the operating system.

  By the way; have you tried to boot the operating system in safe mode by pressing the F8 key?
  Please check this box. Maybe it's possible.

• Satellite M30X-144 DVD - RAM cannot read DVD

  Hello

  I have a portable Satellite M30X-144 and I'm having a problem with my DVD player (Mat * a DVD - RAM UJ-8315).

  I can play CDs, but when I put any kind of DVD in there, it does not read anything.

  What can I do to solve it?

  Hi João,.

  you have a problem with your DVD player? I suggest the following:

  Remove the disc in the "device manager" Windows, let windows reinstall, test if it works. If the same problem persists contact an ASP in local (certified partner)
  because your drive is probably faulty then your machine should be checked by a qualified technician.
  Here is a site where you can find the nearest ASP:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS

  I hope that I helped you a little bit of the problem of your Satellite M30X. ;)

  Greetings from Croatia

• Satellite Pro L100 - DVD will not turn even upward

  My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.

  When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
  Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?

  I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
  If this is the case why Windows XP does not recognize a DVD - RW?

  If someone sees something I missed please?

  Hey,.

  Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.

  The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.

  Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)

• EMERGENCY SITUATION! Please help me! Why the OFF button would not start me in the hp recovery partition?

  I bought a hp Pavilion dm4-2015dx for a little more than a week or two to Bestbuy.ca.

  When I tried to launch the recovery by pressing F11at the start this morning, the following is the display.

  Windows could not start. A recent hardware or software change might be the cause...

  file:\Boot\BCD

  Statue: 0cx0000225

  Info: an error occurred trying to read the boot configuration

  Note: I recently made a partition, I divided the C drives in A and B, I wonder if that has an effect on my computer?

  Help, please! Only, I bought the laptop for a little more than a week

  Greetings,

  If you insert the first disc in your DVD-rom and you start your computer, the screen HP press ESC until you get a menu. Select the start menu and select CD/DVD-ROM, then enter. When it tells you to press a key to boot from the CD, press a key any. This will load the recovery software. Select immediate assistance and a recovery of the system. This will install your computer as the day where you bought everything first.

  WARNING * you will lose all files and programs that you have installed and placed on your computer that you bought the device.

  Yes, this will allow you to use the F11 key again once the recovery complete. Typical HP for the device warranty is one year. We can find this information for you. If you look at your serial number label, it should give you a serial number and the identification code of the product. With this information, you should be able to trace accurate information by the auditor of warranty status if your product has a #ABA or something similar, don't forget that.

  To find your sticker:

  http://h10025.www1.HP.com/ewfrf/wc/findModel?cc=us & DLC = in & LC =

  The guarantee verification link HP is:

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us & DLC = in & LC = on & os = 4062 & Product = 3204464 & softwareitem = MP-74848-1 & sw_lang =

• Satellite A100-709 - DVD RW not writing DVD discs

  My computer is a Toshiba Satellite.
  My DVD player is TSST corp TS-L632D CD/DVGW.
  My dvd is not written on DVd but it is the reading of dvd and cd writing. Is - this problem is hardware or software proprem.

  Thank you

  Vincent

  Hello

  What applications did you use to write on DVDs?
  I m using Nero. It s a wonderful application that allows to burn with different media.

  In addition, I found a driver DVD-RAM v5.0.2.5 on the European driver Toshiba page.
  Install it and check what is happening with the laptop.

  Otherwise, it might be a hardware problem

• Satellite Pro A210 DVD Drive not working no-error code 39

  Hi all

  My Satellite Pro A210 dvd player does not load.
  When I looked inside, he showed an error code 39.
  I tried uninstalling and reinstalling but it still doesn't work.

  Any ideas?

  Hello

  To my knowledge, the 39 error message appears if the CD/DVD drive is not visible in my computer.
  You can try this workaround:
  Go to Device Manager and remove the drive CD/DVD from the list of devices.
  Then go to the registry (regedit) and remove upper and lower key filters:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the device and test again
  I think this should help!