Satellite L665D - No POST after LCD cable Strip

Similar Questions

• Satellite A100 - display balack after replacing the LCD screen

  Hello

  So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

  When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

  I think it is the inverter, any suggestions?

  Could be the sensor cover?

  Thank you! Kyle

  Hi Kyle,.

  Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

  Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
  Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

• Tecra 8100 did poster need nothing on LCD - LCD cable

  Hi, my Tecra 8100 13.3 "laptop does not display anything on the LCD screen. It works with the VGA. I'm looking for a LCD cable for this laptop. Any body know where I can buy one. Any body know what is the part number FRU for this. Not the cable of the LCD screen for this model and other model is different?

  Aryabhatta

  Hello

  You will be very happy if someone has so much information for you. In my opinion, you should check if you can find the same parts and don't forget that you can exchange it. Tecra 8100 is about 6 years old and find new parts can be difficult.

  I put t know which country you live but try to pick up a few pieces of notebook offering online in your country. Second option is to check eBay. From time to time, you can find there defective laptops, but many pieces can be used for replacement.

• Versions of Y500 lcd cable

  Hello

  I have a y500 lenovo with HD (not Full HD) screen and the LCD cable is broken. The service seems to have no cable in stock so I decided to buy it on the internet. After looking at the number of RUF in the maintenance manual, I found only fru in the manual for the LCD cable. Does that mean that the same cable works for both HD and Full HD? What is the DC02001ME0J cable itself has two versions? As in ebay all sellers say in the description that this is for the HD or Full HD.

  Thanks in advance.

  Hi aakmel,

  Well Yes, posted a false image, it is the Y500, on the next page in the Manual:

  

  the manual makes no difference that I could find on HD or Full HD, so it must be the same cable.

• Satellite A300 - question post Windows 7 upgrade

  G ' Day all,

  I made 2 posts to Microsoft Discussion groups:

  * Post 1: *.
  G ' Day all,

  Installed two systems (networked) from Vista to Win 7 HP (32 bit).
  Problems minors network/homegroup - all resolved.

  Desktop computer - fine.

  Laptop -?
  Toshiba Satellite 300.

  "After reboot, any connection displays dialog" Options of Performance "-no pagefile."
  A/c administrator can change (Managed/auto/manual) - "Restart required".
  as expected.

  GoTo previous paragraph (loop).

  Do you want?

  Kind regards
  Pat Garard
  Melbourne, Australia

  * The Terminal 2 (auto answer): *.
  For those who might follow...

  The solution can be found at:
  http://social.technet.Microsoft.com/forums/en/w7itproperf/thread/ec146153-6439-4d09-be00-1798990e6d2f

  > Run the following from a high CMD prompt:
  > sc config start = disabled afs
  >
  > (Note that the syntax of the command is very special -
  (> there is no space before the =, but there is an after)
  >
  > Then restart.
  .....
  > To start a high CMD prompt, click the round of departure,
  > type cmd.exe {in the bottom search box that has focus},.
  > in the list right click on CMD.exe, then choose 'run as administrator '.

  SFA - SEEMS to BE a distributed network file system...

  It would be wonderful if someone knowledgeable could clarify this...
  ... how it came to be on a Toshiba laptop...
  ... Would be - this 'SQL Server Active Directory Helper"(the only difference
  between the desktop and laptop)? ...
  ... Why is it a problem? ...
  the solution isn't a problem which not has not yet manifested? ...
  ... and his impliications!

  Kind regards
  Pat Garard
  Melbourne, Australia

  Is there an explanation of "Toshiba"?

  Hi mate

  First of all, it seems that it of not clear to you that it is a user to user forum
  You can start a discussion with users of common Toshiba laptops

  Return to your ad;
  To be honest it of not clear to me that you are talking about or what the problem

  You are trying to update Vista to Win 7?
  Well, please note that there are some applications which could not be supported by Win 7!

  Maybe you should take a look here:

  + Windows 7 upgrade: step by step Upgrade Guide +.
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R02.htm

  + Windows 7 upgrade: Notes and Restrictions +.
  http://APS2.toshiba-tro.de/KB0/TSB9A02PE0000R01.htm

  Check it! Perhaps, it might be useful.

• Satellite Pro 6100 stops after 15-30 minutes

  My satellite Pro 6100 Cup after 15 to 30 minutes of operation on power outlet. There is a noise and all the lights go out except orange slow flashing (power problem). I have restore by removing the power cable and wait a while.

  It will then start again. I used two different adapters and two different batteries. It also happens if work on AC with no battery in the. My suspicion is an overheat cut-out. The Sat Pro has a? Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in. Advice much appreciated. Thank you.

  > Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in
  I agree with you and the user SambadeAmigo. It seems like a simple problem of overheating and so the laptop automatically stops to prevent the equipment from damage

  I assume that your laptop can be enabled again after being allowed to cool. It is a common question if the cooling modules may not work properly because of the dust and debris.
  As suggested, it would be possible to remove dust using the can of compressed air.
  It should work.

  See you soon

• Satellite Pro U200 starts after some time it stops after 5 minutes

  Satellite Pro U200 stops after 5 minutes, then starts after some time. When she stops the
  blue screen say - stop: (0x0000008e, 0xaa846f58, 0xa9f29808, 0x00000000)

  Sysaudio.sys - address aa846f58 base at aa843000, datestamp 41107f1a

  Hello

  Believe me; It's not easy to say exactly why the BSOD appears.
  It usually happens because of a malfunction or severe software hardware fault.
  Have you used the operating system of the image of Toshiba?
  Message it says something about sysaudio.sys.
  This file is a system audio WDM filter processes and it s a part of the Windows operating system. It controls the material such as the printer or the graphics card at a lower level.

  Note: The virus uses these files as a camouflage. You should always use an anti virus application.

  In addition, you suggested that the laptop stops after 5 min.
  Well, this looks like an overheating problem. How did you use the laptop? You know that free space around the laptop is very important due to the circulation of air. Fans should also be free.

  I you use Notepad in the right position and it happen, so I recommend asking for help Toshiba service partner. They should check the laptop.

• Re: Satellite A500 - 14L: must place LCD in a certain position to have the image

  I have an A500 - 14L
  Recently, the LCD cable from the motherboard has started giving me (hardly the hindge)
  I need to put the screen in a certain position in others having the right picture on the LCD

  Where can I buy a new cable?
  PC bought in France (still have the warranty) but travel a lot and won't return soon.

  Someone else has the same problem?

  TKS

  Hi mate

  Are you sure that the cable is affected?
  Why you n t come into contact with a local ASP (Toshiba service partner)?
  I think that the guarantee of the A500 must still be valid since this laptop model is not very old

  In this case everything should be done for free.

  You will find here all ASP world-wide:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

• Satellite A100 psaa9e beeps after BIOS update

  Hi all!

  My pc is a Satellite A100 psaa9e and after that the Bios updated Bios say 'no tmp or tmp has failed. "

  I have try this procedure (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=36186&tstart=0) and my pc does not restart automatically.
  He finishes the beep continuous beep, a low beep and two normal beep, and * didn't do anything that I have not reset! *.

  _FLOPPY LEADER: _
  the diskette is 1.44 m
  MINIDOS on the diskette. SYS PHLASH16. EXE BIOS. PHLASH WPH. INI
  the BIOS. WPH is version BIOS of San Antonio s10gm590.rom (5.90) http://support1.toshiba-tro.de/tedd-files2/0/bios-20070709111839.zip
  the PHLASH. INI file contains the following:
  [UI]
  Advanced = 1

  [Hand]
  RetryCount = 3
  UpdateMode = 3
  FormatVersion = 2
  UpdateFlags = 802880
  UserFlags = 802080
  UserMask = d121a4
  PSIFlags = 8000080
  UserMode = ffffffff
  BackupFile =
  ImageFile =

  Please help me!

  In my opinion, the ROM module where the BIOS is stored has been damaged or has been flashed properly.
  In your case, I recommend you contact the ASP technician and ask guys processional flashing the BIOS.

• Satellite L300 regularly freezes after BIOS update

  I've updated the latest bios for my Toshiba Satellite L300. However, after using the computer for half an hour, the computer is frozen.

  Even though I reinstalled the operating system, this problem still occurs. Can someone view please the link to the previous bios for this Toshiba L300?

  Kind regards.

  Check if there are several versions of BIOS according to the operating system that you are using as if it were with other series of satellites?
  And redefine the BIOS settins on default. This often allows too much.

  Not sure, but I think that you will not find a previous version of the BIOS on Toshiba download page and so you can ask your ASP if they can return BIOS back to a previous version.

• Equium U400/146 - I need a replacement lcd cable/Ribbon

  Hello
  Please help I have searched for days.
  I need a replacement lcd cable/Ribbon. Identification number (DDOBU2LC000)

  My laptop is Toshiba Equium U400/146 PSU42E-00400SKS model number. Sound off out of warranty, so I took it to
  my local repair shop, but they could not get the part. The problem with the LCD is that it starts in green
  I can still use the programs, the grays and whites shine through.

  When it is connected to a crt monitor, the laptop is fine. Return to the cable, the screen number is REC-NI3311-LOL. C1

  If someone could point me in the right direction for this part, I would be most gratefull

  Thank you

  Hello

  All laptop parts can be ordered from the local ASP (certified partner).
  I think that guys should be able to order this cable/Ribbon.

  Here you can find the database with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

  Good luck

• HP Compaq 610 laptop computer lcd cable

  Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX.   Sorry for my English...

  K_Szabi wrote:
  

  Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX.   Sorry for my English...

  Hello

  You can buy a complete kit under this part number: 538463-001

  http://www.lambda-Tek.com/538463-001-HP-SPS-LCD-cable-kit~CS/B569917&viewSpec=y

  Useful information be found here as a way to replace it etc...

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=3958407&targetPage=http%3A%2F%2Fbizsupport2.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc01787889%2Fc01787889.pdf

• E6420 - Bios A07 - false positive diagnosis - Lcd Cable

  Hello world!

  I found a weird bug with update bios A07 on the E6420 (i5 - 2520 m). The utility disgnostics report "error Lcd 2000-0415. When I return to A06, the problem disappear.

  Anyone can repeat this mistake? I had opened a case to replace my lcd cable and I will contact Dell to cancel the replacement of the cable. But if no one can repeat the problem may be that the cable is really damaged and better A07 bios detects it.

  I have no problem using the computer.

  Thank you.

  There is a long and a short version of this... As I understand it, Dell has implemented a change to the hardware level allowing the cable test for the work they have released newer versions of systems and enabled in the BIOS.  For systems with the old cables, it always generates a false positive.  It is not an error in the BIOS, it's just this test is not supported by the hardware you have.

• Which LCD cable for laptop HP DV7 4020sa

  Hi, I have a difficulty to determine which cable I need for my computer HP DV7 laptop 4020sa.

  The serial number of the device is {content removed}, and the LCD cable has a tag with "replace with HP spare...". 605324-001 "and"7F1074"below.

  I tried speaking with HP direct and received the wrong information about the part I need. They said that I needed part number 71CI0832001 with 480449-001 below.   I bought this article and concluded that, although the two are cable of the lcd screen, they have completely different connectors.

  Either way, the cable must be replaced because he was stuck against the leg that is used to tighten the body! It has generated a huge amount of heat and melted the paw and burnt the cable!

  If anyone has any information, I would be very grateful, and it can restore my very low opinion on defects of HP and very poor customer relations

  Thanks in advance

  Steve

  I did some research and according to your maintenance manual, the part number is 605333-001, look on page 72.

  http://h10032.www1.HP.com/CTG/manual/c02642701.PDF

  Yours is an LED screen and there is no ups, so the cable will be thinner then the person using an inverter.

  Here is a picture of e - bay for reference.

  http://CGI.eBay.Ph/WS/eBayISAPI.dll?ViewItem&item=300486312385

  It is also strange that when I googled the part number which is on your old cable he refers to all of the LED screen.

  If you look on page 68 of the manual it mentions that part number 605324-001 is a replacement of the screen.

  The they gave you is for a backlit display for a CCFL lamp with and the inverter.

  http://www.impactcomputers.com/480449-001.html

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=08568760B8124A33B9679669BA127BE9&SearchIn=PartNumber&SearchPN=605333-001  It should be correct.

• Acrobat CC - lost Scripture I posted after using the fill & sign. Help, please...

  Acrobat CC - lost Scripture I posted after using the fill & sign. Help, please... It happened after I merged the two files...

  Hi mannys14196422,

  This problem has been resolved in the last update. Go help--> Check for Updates.

  Please let us know if you still face the question.

  Kind regards

  Sandeep