Versions of Y500 lcd cable

Similar Questions

• E6420 - Bios A07 - false positive diagnosis - Lcd Cable

  Hello world!

  I found a weird bug with update bios A07 on the E6420 (i5 - 2520 m). The utility disgnostics report "error Lcd 2000-0415. When I return to A06, the problem disappear.

  Anyone can repeat this mistake? I had opened a case to replace my lcd cable and I will contact Dell to cancel the replacement of the cable. But if no one can repeat the problem may be that the cable is really damaged and better A07 bios detects it.

  I have no problem using the computer.

  Thank you.

  There is a long and a short version of this... As I understand it, Dell has implemented a change to the hardware level allowing the cable test for the work they have released newer versions of systems and enabled in the BIOS.  For systems with the old cables, it always generates a false positive.  It is not an error in the BIOS, it's just this test is not supported by the hardware you have.

• Tecra 8100 did poster need nothing on LCD - LCD cable

  Hi, my Tecra 8100 13.3 "laptop does not display anything on the LCD screen. It works with the VGA. I'm looking for a LCD cable for this laptop. Any body know where I can buy one. Any body know what is the part number FRU for this. Not the cable of the LCD screen for this model and other model is different?

  Aryabhatta

  Hello

  You will be very happy if someone has so much information for you. In my opinion, you should check if you can find the same parts and don't forget that you can exchange it. Tecra 8100 is about 6 years old and find new parts can be difficult.

  I put t know which country you live but try to pick up a few pieces of notebook offering online in your country. Second option is to check eBay. From time to time, you can find there defective laptops, but many pieces can be used for replacement.

• Equium U400/146 - I need a replacement lcd cable/Ribbon

  Hello
  Please help I have searched for days.
  I need a replacement lcd cable/Ribbon. Identification number (DDOBU2LC000)

  My laptop is Toshiba Equium U400/146 PSU42E-00400SKS model number. Sound off out of warranty, so I took it to
  my local repair shop, but they could not get the part. The problem with the LCD is that it starts in green
  I can still use the programs, the grays and whites shine through.

  When it is connected to a crt monitor, the laptop is fine. Return to the cable, the screen number is REC-NI3311-LOL. C1

  If someone could point me in the right direction for this part, I would be most gratefull

  Thank you

  Hello

  All laptop parts can be ordered from the local ASP (certified partner).
  I think that guys should be able to order this cable/Ribbon.

  Here you can find the database with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

  Good luck

• HP Compaq 610 laptop computer lcd cable

  Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX.   Sorry for my English...

  K_Szabi wrote:
  

  Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX.   Sorry for my English...

  Hello

  You can buy a complete kit under this part number: 538463-001

  http://www.lambda-Tek.com/538463-001-HP-SPS-LCD-cable-kit~CS/B569917&viewSpec=y

  Useful information be found here as a way to replace it etc...

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=3958407&targetPage=http%3A%2F%2Fbizsupport2.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc01787889%2Fc01787889.pdf

• Which LCD cable for laptop HP DV7 4020sa

  Hi, I have a difficulty to determine which cable I need for my computer HP DV7 laptop 4020sa.

  The serial number of the device is {content removed}, and the LCD cable has a tag with "replace with HP spare...". 605324-001 "and"7F1074"below.

  I tried speaking with HP direct and received the wrong information about the part I need. They said that I needed part number 71CI0832001 with 480449-001 below.   I bought this article and concluded that, although the two are cable of the lcd screen, they have completely different connectors.

  Either way, the cable must be replaced because he was stuck against the leg that is used to tighten the body! It has generated a huge amount of heat and melted the paw and burnt the cable!

  If anyone has any information, I would be very grateful, and it can restore my very low opinion on defects of HP and very poor customer relations

  Thanks in advance

  Steve

  I did some research and according to your maintenance manual, the part number is 605333-001, look on page 72.

  http://h10032.www1.HP.com/CTG/manual/c02642701.PDF

  Yours is an LED screen and there is no ups, so the cable will be thinner then the person using an inverter.

  Here is a picture of e - bay for reference.

  http://CGI.eBay.Ph/WS/eBayISAPI.dll?ViewItem&item=300486312385

  It is also strange that when I googled the part number which is on your old cable he refers to all of the LED screen.

  If you look on page 68 of the manual it mentions that part number 605324-001 is a replacement of the screen.

  The they gave you is for a backlit display for a CCFL lamp with and the inverter.

  http://www.impactcomputers.com/480449-001.html

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=08568760B8124A33B9679669BA127BE9&SearchIn=PartNumber&SearchPN=605333-001  It should be correct.

• Inspiron 1750 lcd cable

  I bought a new lcd cable for an inspiron 1750 that does not display on screen, but displays correctly when an external monitor is connected to the vga port. The screen light up (backlights). Now that I installed the new cable, the display on the laptop is not even light to the top more.

  My question is, "what is the difference between, or is there a difference between the part # G600T, 0G600T, 50.4CN05.101 and G600T, 0G600T, 50.4CN05.001." My old cable number is the last, and the one I bought is the first. Could it be the problem? Help, please.

  The cables are the same - so assuming have not two cables defective (unlikely), it is much more likely, that the motherboard itself is defective, not the cables - assuming that the LCD is working (to check this, hold down the key of D through power until you see in alternation of solid - color screens if you get that far the screen is OK).

• Satellite L665D - No POST after LCD cable Strip

  I have a Satellite L655d S5550 and a few months ago, it has no video after a break caused by the process of closing LCD I've ever done.

  After her, I try:
  a power draining
  turn to the memory of RAM slot
  Turn on with just a memory
  Odd and band and reaset hdd cables
  Clear CMOS

  None of this works, the computer displays leds and its hard drive, cooler works normally but still no video.
  I forgot for a couple of months so I try to fuel once and 2 times it displays video normally, but after the third time without problem the video returns.

  After it, I opened the laptop and with it under tension, I did strip the cable of the LCD of the motherboard, then the system closed immediately.

  So, since it does not supply the computer power with or without baterry.
  The power led flashes and don't fill POST heatsinhk does not work.

  Any idea? I fear it's a motherboard burned, because I am of the Brazil and there is no replacement for it.

  I think that there is a hardware problem but from my point of few Interior/LCD display isn t the troublemaker.

  The point is that even if the internal screen would be defective, the laptop must turn on correctly and in an external monitor, it should be possible to use the laptop.

  For me, it seems that the motherboard or card mother as GPU (graphics processing unit) could be faulty.
  This malfunction is a worse because the replacement of the motherboard is a very expensive procedure and I think that it s not worth to fix it in case the warranty isn't valid more.

• Satellite A500 - new LCD cable

  Hello

  My Satellite A500-13f laptop got his damaged cable lcd and now I need a new.

  When I went to tech support, they said they found itself without a reference number on this issue, and they need the number of the room as well as the model number to make me a new cable of the LCD.

  apparently even model laptops are sometimes with different lcd screens and so different video cables

  My laptop is the exact same in this [page | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?DISC_MODEL=0&ACTION=PRI NT_WITH_BACK & service = EU & PRODUCT_ID = 1070219]

  {color: #000000} so can you help me with the number please?
  {color}

  To be honest I don't understand the problem. Toshiba service can identify the right display and the cable for your laptop model. They can find this info in the Toshiba database so I put t understand why you need to find the part number for the service.
  > When I went to technical support
  Is - this Toshiba technical support?

• Equium U400-145 - part number for the LCD cable

  I have a Toshiba Equium U400-145 (series 88102623W). The display acted during the last two weeks by going all blurry with a sort of static green.

  When I move the front cover and back it corrects sort of himself. I am out of warranty and used to be a satellite for the Navy engineer, so I know how to fix the printed circuits, etc. (in other words), that I felt competent to investigate). I found that there is a cable near the left hinge that if I push it sideways slightly corrects the flaw of the screen. If I let go he returns to the 'fuzz '.

  The problem is that explaining that parts team left me a little frustrated because they could not decide if it was one of these two part numbers: A000020640 or A000022790.

  I'm inclined this is the first judging by their description of the element (thick cable that leads from the motherboard), but I was wondering if someone could possibly shed light on this for me?

  Thank you

  VJ

  Hello

  I understand your problem very well, but if they can't help you even that they can identify and check the Toshiba database how we can help you on this forum users?

  Have you contacted Toshiba authorized service provider in your country?

• Looking for a HP HDX X 16 Series LCD cable!

  Hi my name is mohammad

  IM Looking For the hdx 16 hp screen cable

  and I'm too tired to find this piece

  Where can I buy it?

  any cable Compatible with the HDX X 16-1200 Series

  photo here for cable

  

  http://img46.imageshack.us/img46/5402/tcsx.jpg

  I hope to help Support hp me soon

  Hello

  Please use the following manual to work part # you need to buy. You may need to buy a full game, not only one party:

  http://Tim.ID.au/laptops/HP/HP%20hdx%2016.PDF

  After getting the correct number, you can buy at the following stores OR using eBay:

  • http://h20141.www2.HP.com/hpparts/?cc=us&lang=en&JumpID=hpr_r1002_usen
  • http://PartSurfer.HP.com/

  Kind regards.

• Video cable LCD BLI for Toshiba Satellite S50t-B

  Hello

  We have laptop Toshiba Satellite S50t-B, what LCD video cable will fit this laptop?

  the cable was written on it the following:
  BLI LCD CABLE
  DD0BLILC020
  140409 JHI
  REV:3 HAS
  (you can take a look at the photos too).

  Please let me know if the two versions (DD0BLILC000 and DD0BLILC020) will be adapted to the laptop S50t-B. If there is another replacement that I can use, please let me know.

  Thank you. Mile

  It is not easy to help you with this. These lists of spare parts are not public documents and it is difficult to find info on this subject.
  You can try to contact Toshiba service provider and ask for help.

• Cable LCD Y560 replacement problems

  Hello good people of Lenovo forums!

  I have a laptop Y560 who has a damaged LCD cable (part no: "DD0KL3LC000"). Because of the hinge of this model problem, the LCD cable had caused the crazy screen flicker and inverted the colors.

  So I recently tried to replace one on ebay, but unfortunately it did not work... as when I inserted the new cable, the screen of the laptop does not work at all (without backlight or photo). The cable is labeled as "DDKL3DLC120" on its label, even though the ebay description was DDKL3CLC020, which is supposed to be the same as my original.

  Did I just took a wrong choice of the ebay seller? I think it should work.

  On my other problem... my power adapter seems to be wobbly after trying the new replacement cable - because my battery is cooler! Comments:

  • The Y560 off, with battery inserted, I connect the power adapter. The AC adapter led turns off and does not power up what I send to reconnect electric socket head.
  • Power adapter is plugged in. Windows CONSTANTLY tells me to plug my adapter, with this message in endangered (battery tray icon load again), then telling me to plug again. I also notice a slight flickering on my front right external LCD screen the following messages is displayed (my internal LCD is still drunk as stated above).

  • The laptop works fine on AC only without the battery inserted.

  The problem would be the adapter? and not the battery? If all goes well not something that is dead on the M/B?

  Thank you

  Problem. Solved.

  

• Need cable LCD Vaio

  Where can I get a replacement for a Vaio SVE141D11L laptop LCD cable?

  -John

  Yes, the laptop is a bit new, so you will want to find something similar that's all I can say.

  Or try the Sony parts and accessories https://servicesales.sel. Sony.com/web/contact_us.jsp

• Fuzzy interrupted audio output with an hdmi cable

  Hi all

  I have sony vaio laptop (WINDOWS 7 BASIC) I tried to connect it to my lg lcd with hdmi (the most recent version of 19 pin) cable

  everything isworking fine except the audio which is interrupted by gaps of no noise and is also blurred, please help me on this

  I tried to search for the drivers and other updates but everythingis all right except the audio that is not clear.

  I GET AUDIO FROM MY LG LCD BUT HIS TROUBLED BY GAPS AND DOES NOT KNOW.

  PLEASE HELP ME ON THIS.

  Hi all

  Thank you for your support, my problem is now solved, actually I just tried to connect my vaio with LCD when my vaio was off, then it worked.

  After connecting via hdmi and then I started my vaio and it worked great.

  Thank you all for your support

  see you soon