Inspiron 6400 - is more access to the network (wired or wireless)

Similar Questions

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• From Firefox blocks all access to the network

  When I start Firefox (41.0.1), all access to the network is completely blocked. Before you start the FF, I can access the Internet (with Chrome or IE), other computers, but as soon as I launch Firefox, all access to the network (including the connection to other computers) is blocked. In addition, my computer will turn off more.

  As far as I KNOW, I have not installed lately extensions or add-ins.

  Thank you for your resolution. Today, when I mentioned to work, I was told to update Firefox. This seems to do the trick (so far, fingers crossed!).

  (https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings) so very probably an extension is causing harm.

  When this isn't ' t the resolution, I will surely return to your resolutions.

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• LATITUDE DE820 wiped out loaded XP drivers DELL & SW, no access to the network

  Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Service that I plugged in Ethernet, but I also have a WLAN - but NO communication to all NETWORKS. Ping an IP address any LAN brings 'Host unreachable' IPConfig/all shows: IP of Windows host Setup...: laptop Prim. DNS: Enter Mode: Broadcast IP routing enabled: No. WINS Proxy enabled: Ethernet adapter without Bluetooth network connection: media state: media disconnected Description: peripheral physical addr Bluetooth (Personal Area Network): Mac addr. Control Panel-> network connections displays LAN at the Connecticut 1394 network adapter (properties: peripheral works properly, driver: MS 07/01/2001!) Connection status: connected but 0 packet protocols: f. Client Microsoft NW File & Printer sharing TCP - IP - trying to hit the repair-> msg "TCP/IP not enabled for this connection") Conclusion: I think that my XP drivers are too old, or not DELL problem: I have no access to the network - minimum need drivers update for access to Internet, and then upgrade to download that/those pilot on a Non-Dell PC then CD, then install on the laptop don't know DELL HW, used Service tag to find 11 drivers, drivers resp. 75 for that I think it's a driver of 'network' - but don't know what or any other suggestion? Thks for any help Peter

  Well well maybe it was because I realized that I needed to insert HTML
  to get my text with line breaks.
  But in any case the problem is solved by support group European German DELL who responded very quickly by there DELL Forum and help me great to go again. Thank you DELL-Dave S.
  Problem solved by:
  followind drivers downloaded from the CD, and then installed on D820
  WLAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=R257701&OSCODE=WW1&FILEID=2731111614&LANGUAGECODE=DE&CATEGORYID=NI.
  LAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=04VK6&OSCODE=WW1&FILEID=2731090506&LANGUAGECODE=DE&CATEGORYID=NI.
  Now using Ethernet and wireless network worked with access to the network, all the others downloaded drivers from the net.
  Viva

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• vSwitch ESXi 5.1 workaround to virtual machines (direct access to the network)

  Hello world!

  I have a server running properly the 5.1 ESXi hypervisor and got inside the physical grid active router with DHCP. How can I configure the vSwitch on ESXi 5.1 work not managed on the network, without VLAN and have direct access to the network?

  Just to clarify, I would like to first of all virtual machines VMware Workstation works - if it is possible to run several virtual machines and define all NICS (Network Interface Card) as connected by a bridge, that is to say. Each VM gets the specific configurations of IP to the external router.

  Since now, thank you very much for the help!

  Best regards

  Eduardo

  With ESXi the vSwitches work comparable to Bridged networking, so there is really nothing special to do.

  André

• The user read/write register access to the network folder/drive. Some users unable to save or write to the directories.

  I have three users who have no problem with read/write & record readers records secure network access. I have two users who can read some files and save in some files, but cannot save or access certain folders even after receiving full access read/write for all files in the network drive. Help, please. The computers running Vista Ultimate and server access to Windows Server 2003. Thanks for your times * address email is removed from the privacy *.

  Problems related to access to the files on a server networked in a business environment are a produce little for Windows answers Forum.  I recommend you repost the question either in the Technet Forum to the:http://social.technet.microsoft.com/Forums/en-us/winserverfiles/threads orhttp://social.technet.microsoft.com/Forums/en-us/itprovistanetworking/threads.

  I don't know that someone there can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• AnyConnect to ASA 5505 ver 8.4 unable to ping/access within the network

  My AnyConnect VPN to connect to the ASA, but I can not access my home network hosts (tried Split Tunnel and it didn't work either). I intend to use a Split Tunnel configuration, but I thought I would get this job until I've set up this configuration. My inside hosts are on a 10.0.1.0/24 network and networks 10.1.0.0/16. My AnyConnect hosts use 192.168.60.0/24 addresses.

  I saw the messages of others who seem similar, but none of these solutions have worked for me.  I also tried several configurations NAT and ACLs to allow my internal network to the ANYConnect hosts and return traffic shaping, but apparently I did it incorrectly.  I undestand what this worm 8.4 is supposed to be easier to achieve, NAT and others, but I now have in the IOS router it is much simpler.

  My setup is included below.

  Thanks in advance for your help.

  Jerry

  *************************************************************

  ASA Version 8.4 (4)

  !

  hostname mxfw

  domain moxiefl.com

  activate the (deleted) password

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  Shutdown

  !

  interface Ethernet0/4

  Shutdown

  !

  interface Ethernet0/5

  switchport trunk allowed vlan 20.22

  switchport mode trunk

  !

  interface Ethernet0/6

  Shutdown

  !

  interface Ethernet0/7

  Shutdown

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.0.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  interface Vlan20

  nameif dmz

  security-level 50

  IP 172.26.20.1 255.255.255.0

  !

  interface Vlan22

  nameif dmz2

  security-level 50

  IP 172.26.22.1 255.255.255.0

  !

  passive FTP mode

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  name-server 208.67.222.222

  Server name 208.67.220.220

  domain moxiefl.com

  permit same-security-traffic inter-interface

  network of the Generic_All_Network object

  subnet 0.0.0.0 0.0.0.0

  network of the INSIDE_Hosts object

  10.1.0.0 subnet 255.255.0.0

  network of the AnyConnect_Hosts object

  192.168.60.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.60.0_26 object

  255.255.255.192 subnet 192.168.60.0

  network of the DMZ_Network object

  172.26.20.0 subnet 255.255.255.0

  network of the DMZ2_Network object

  172.26.22.0 subnet 255.255.255.0

  pager lines 24

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 dmz

  dmz2 MTU 1500

  local pool VPN_POOL 192.168.60.20 - 192.168.60.40 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT dynamic interface of Generic_All_Network source (indoor, outdoor)

  NAT (inside, outside) static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.60.0_26 NETWORK_OBJ_192.168.60.0_26 non-proxy-arp-search to itinerary

  NAT (dmz, outside) dynamic interface of Generic_All_Network source

  NAT (dmz2, outside) dynamic interface of Generic_All_Network source

  Route inside 10.1.0.0 255.255.0.0 10.0.1.2 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  Enable http server

  http 10.0.0.0 255.0.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec ikev2 AES256 ipsec-proposal

  Protocol esp encryption aes-256

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES192

  Protocol esp encryption aes-192

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES

  Esp aes encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 proposal ipsec 3DES

  Esp 3des encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal OF

  encryption protocol esp

  Esp integrity sha - 1, md5 Protocol

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  domain name full anyconnect.moxiefl.com

  name of the object CN = AnyConnect.moxiefl.com

  Keypairs AnyConnect

  Proxy-loc-transmitter

  Configure CRL

  string encryption ca ASDM_TrustPoint0 certificates

  certificate 439 has 4452

  3082026c 308201d 5 a0030201 9a 445230 02020443 0d06092a 864886f7 0d 010105

  05003048 06035504 03131641 6e79436f 6e6e6563 742e6d6f 78696566 311f301d

  6c2e636f 312530 2306092a 864886f7 0d 010902 1616616e 79636f6e 6e656374 6 d

  2e6d6f78 6965666c 2e636f6d 31333039 32373037 32353331 5a170d32 301e170d

  33303932 35303732 3533315a 3048311f 301D 0603 55040313 16416e79 436f6e6e

  6563742e 6d6f7869 65666c2e 636f6d31 86f70d01 09021616 25302306 092a 8648

  616e7963 6f6e6e65 63742e6d 6f786965 666c2e63 6f6d3081 9f300d06 092 has 8648

  86f70d01 01010500 03818d 00 30818902 8181009a d9f320ff e93d4fdd cb707a4c

  b4664c47 6d2cc639 4dc45fed bfbc2150 7109fd81 5d6a5252 3d40dc43 696360d 5

  fbf92bcc 477d19b8 5301085c daf40de5 87d7e4aa f81b8d7f 8d364dfa 0a6f07d7

  6a7c3e9b 56e69152 aa5492d8 e35537bd 567ccf29 7afbeae8 13da9936 9f890d76

  1d56d11d da3d039a 0e714849 e6841ff2 a3633061 03010001 300f0603 b 5483, 102

  1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 86301f06 04030201 551d

  23 04183016 80142f27 7096c4c5 e396e691 e07ef737 af61b71f 64f1301d 03551d

  0603551d 0e041604 142f2770 96c4c5e3 96e691e0 7ef737af 61b71f64 f1300d06

  092a 8648 86f70d01 01050500 03818100 8f777196 bbe6a5e4 8af9eb9a 514a 8348

  5e62d6cd e430a758 47257243 2b 367543 065d4ceb 582bf666 08ff7be1 f89287a2

  ac527824 b11c2048 7fd2b50d 6aa00675 e4df7859 f3590596 b1d52426 ca 35, 3902

  226 dec 09 713f7ba9 80bdf7bb b52a7da2 4a68b91b 455cabba 4e77f4b0 1e97a52c

  0cc4c6f3 f244f7d9 0a6e32fb 31ce7e35

  quit smoking

  IKEv2 crypto policy 1

  aes-256 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 10

  aes-192 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 20

  aes encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 30

  3des encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 40

  the Encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  Crypto ikev2 activate out of service the customer port 443

  Crypto ikev2 access remote trustpoint ASDM_TrustPoint0

  Telnet timeout 5

  SSH 10.0.0.0 255.0.0.0 inside

  SSH timeout 5

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  dhcpd dns 208.67.222.222 208.67.220.220

  dhcpd outside auto_config

  !

  dhcpd addresses 10.0.1.20 - 10.0.1.40 inside

  dhcpd dns 208.67.222.222 208.67.220.220 interface inside

  dhcpd allow inside

  !

  dhcpd address dmz 172.26.20.21 - 172.26.20.60

  dhcpd dns 208.67.222.222 208.67.220.220 dmz interface

  dhcpd enable dmz

  !

  dhcpd address 172.26.22.21 - dmz2 172.26.22.200

  dhcpd dns 208.67.222.222 208.67.220.220 dmz2 interface

  dmz2 enable dhcpd

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint0 point

  WebVPN

  allow outside

  AnyConnect essentials

  AnyConnect image disk0:/anyconnect-win-3.0.2052-k9.pkg 1

  AnyConnect profiles AnyConnect_client_profile disk0: / AnyConnect_client_profile.xml

  AnyConnect enable

  tunnel-group-list activate

  internal GroupPolicy_AnyConnect group strategy

  attributes of Group Policy GroupPolicy_AnyConnect

  WINS server no

  value of server DNS 208.67.222.222 208.67.220.220

  client ssl-VPN-tunnel-Protocol ikev2

  moxiefl.com value by default-field

  WebVPN

  AnyConnect value AnyConnect_client_profile type user profiles

  password username user1 $ $ encrypted privilege 15

  password username user2 $ $ encrypted privilege 15

  tunnel-group AnyConnect type remote access

  tunnel-group AnyConnect General attributes

  address VPN_POOL pool

  Group Policy - by default-GroupPolicy_AnyConnect

  tunnel-group AnyConnect webvpn-attributes

  enable AnyConnect group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Review the ip options

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:f2c7362097b71bcada023c6bbfc45121

  : end

  Hello

  You may have problems with the NAT configurations

  Look at these 2 high page configurations

  NAT dynamic interface of Generic_All_Network source (indoor, outdoor)

  NAT (inside, outside) static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search

  The solution is either to reconfigure the dynamic PAT with the lowest priority (goes tearing down the current normal outbound connections) OR reposition the exempt NAT / configurations NAT0

  Dynamic change of PAT could be done with

  no nat dynamic interface of Generic_All_Network source (indoor, outdoor)

  NAT automatic interface after (indoor, outdoor) dynamic source Generic_All_Network

  NAT0 configuration change could be done with

  no nat source (indoor, outdoor) public static INSIDE_Hosts static destination INSIDE_Hosts AnyConnect_Hosts AnyConnect_Hosts-route search

  NAT (inside, outside) 1 static source INSIDE_Hosts INSIDE_Hosts static destination AnyConnect_Hosts AnyConnect_Hosts-route search

  Changing the order of the NAT0 configurations as described above is probably the simplest solution and does not cause a teardown of connections for users. Of course change the dynamic configuration PAT would avoid future problems if it can generate. For example, it could overide static PAT (Port Forward) configured with Auto NAT configurations.

  Try option suites you best and let know us if it solved the problem

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary

  -Jouni

• Windows 7 loses access to the network share when unplug wired connection

  With my laptop Windows 7 Pro (64-bit SP1;) docked and thus have wired network (within a domain), I can access shares network very well. A wireless connection is active at the same time. When I detach, Windows Explorer and Office applications get upset some of the time. In addition, this is the case when I anchor. He didn't there has no problem opening a file on the network share when I'm rooted or not anchored, but the transition is not well. Windows launches the error code 0 x 80070035, Windows cannot access , the network path was not found. When it is connected to our wireless network, the machine name is altered by an additional letter. The latter has led to a problem that had to be cleared up by a patch installed by my system administrator, but the problem persisted.

  I understand that Windows 7 should be smart enough to pass interfaces for network access, having a preference for a wiring if it is available (perhaps even the connection data rate). Maybe it's too much to expect that the operating system could make this transition, but it seemed that my Vista laptop has done very well. Any suggestions are welcome.
  
  Thank you.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in forum Windows 7 networking . You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Risky to allow access to the network storage and LAN VM?

  What kind of risks could we be exposing our storage network to if we had to assign a VM with network cards on the LAN and SAN?

  Hello

  Moved to the security forum.

  The operating risk is quite minimal.

  Not quite true. iSCSI and NFS protocols are clear! So, it would be possible to do a number of things (ARP Cache poisoning comes to mind) to allow the storage of data flow to a compromised host. A colleague recently made a demo just that. It's actually pretty trivial to do with the right tools.

  The surface of attack before being reduced by limiting the number of machines that extend over these networks.

  That's right, the upper limit of this should really be 0 however for better security. Not only that, if the SAN is really an iSCSI server, this server may be used to attack the service console depending on how the supreme court was also connected to the storage network. You have now increased possible points of attack for the SC of 1 or more.

  You also want to ensure that the network is not routed, while the network is not available from other machines not directly connected to the San.

  Altogether.

  The risk that you open is that an admin would have access to data storage.  That's what you try to avoid.

  If the host which can extend over your LAN and SAN is compromised, then it might be possible for ALL users on the system to get the storage data when it runs on the San.

  The best solution is that if you have a virtual machine or server that fills these networks that they fill in fact to an IP storage device that is not used by ESX hosts, the only exception to this might be the VCB Proxy, but you need to ensure as well if not better than your ESX hosts themselves. Make sure that it is in a protected space, etc.

  Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.dabcc.com/channel.aspx?id=279DABCC analyst [url]
  "Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• No access to the network for machine W7 XP machine

  I tried everything I could find until now but still no access to shared folders on my Office XPsp3 for my new laptop Windows 7. I havepeut however use the printer. Also I can browse shared folders on the laptop W7 since Office XP. I tried a number of "fixes" so far but still get the:

  • \\XPmachine is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
  • Connection failure: the user has not granted the type of logon required on this computer.
  1. I tweaked IRPStack registry at 15
  2. Turned or Simple sharing of files on the XP machine
  3. set up the correspondence of the usernames and passwords on both machines.
  4. Checked and double-checked the permissions are set for all
  5. The two machines are ysing the same workgroup name

  In my view, there are a number of people having problems with this question and that some become it solved and some are not. I am so far on of the 'are destitute. "

  The problem and the solution are on the XP computer.  Run the Configuration Wizard from the network - which is often all that is needed.  If this does not solve it:

  If the computer is running Windows XP Professional:

  1. click on Start > run , type secpol.msc in the box, and then click OK .
  2. click on local strategies .
  3. click on user rights assignment .
  4. click access this computer from the network and make sure that the everyone group is included.
  5. click deny access to this computer from the network and make sure that the everyone group is NOT included.

  If the computer is running Windows XP Home Edition, the "secpol.msc" program is not available.  To make the user required assignments of rights:

  1. download and install the Tools of the Windows 2003 Server Resource Kit .

  2. click on Start > all programs > Windows Resource Kit Tools .

  3. click on control interface .

  4. type these lines to the prompt exactly as shown (case sensitive):

  NET user guest/active: Yes
     NTRights + r SeNetworkLogonRight u comments
     NTRights - r SeDenyNetworkLogonRight u comments

  Boulder computer Maven
  Most Microsoft Valuable Professional

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly