No access to the network for machine W7 XP machine

Similar Questions

• access to the network for INI files

  Hi all.

  I have an application running on four computers.  Have access to a local file server.  All five computers running Windows 7.

  The four target computers search or create an INI file to save the test data for the products under test.  Occasionally, during the trial period, we observed INI related errors.  Specifically, the software starts the error of UIETooManyFilesOpen around either the Ini_WriteToFile or the Ini_ReadFromFile functions (and rarely the UIEIOError).

  The distance between the file server and the taget machines is less than 50 feet.  I made sure that the file server does not sleep.

  Access to the machines of the target file server is resolved simply by a path mapped in the form: "X:\folder\folder\."

  Should I do something differently for this type of topology?  I have considered restructuring the software as it does all of its newspapers written locally and only occasionally writing to the file server.  But I'm not clear why this particular error would happen in the first place.

  
  

• How to restrict access to the network for customers in the lobby.

  Hello

  How is - this preferable to limit the access of the data ports in the lobby of the company for Internet access only? Although the hosts are not on the field, is it safe to allow them to reach the port of data?

  I suggest setting up a vlan separate for these ports and usig dot1q on trunk this vlan to a DMZ interface dedicated or the subinterface on your firewall with an ACL that only allows access to the internet. That should do the trick.

• vSwitch ESXi 5.1 workaround to virtual machines (direct access to the network)

  Hello world!

  I have a server running properly the 5.1 ESXi hypervisor and got inside the physical grid active router with DHCP. How can I configure the vSwitch on ESXi 5.1 work not managed on the network, without VLAN and have direct access to the network?

  Just to clarify, I would like to first of all virtual machines VMware Workstation works - if it is possible to run several virtual machines and define all NICS (Network Interface Card) as connected by a bridge, that is to say. Each VM gets the specific configurations of IP to the external router.

  Since now, thank you very much for the help!

  Best regards

  Eduardo

  With ESXi the vSwitches work comparable to Bridged networking, so there is really nothing special to do.

  André

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• From Firefox blocks all access to the network

  When I start Firefox (41.0.1), all access to the network is completely blocked. Before you start the FF, I can access the Internet (with Chrome or IE), other computers, but as soon as I launch Firefox, all access to the network (including the connection to other computers) is blocked. In addition, my computer will turn off more.

  As far as I KNOW, I have not installed lately extensions or add-ins.

  Thank you for your resolution. Today, when I mentioned to work, I was told to update Firefox. This seems to do the trick (so far, fingers crossed!).

  (https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings) so very probably an extension is causing harm.

  When this isn't ' t the resolution, I will surely return to your resolutions.

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• LATITUDE DE820 wiped out loaded XP drivers DELL & SW, no access to the network

  Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Service that I plugged in Ethernet, but I also have a WLAN - but NO communication to all NETWORKS. Ping an IP address any LAN brings 'Host unreachable' IPConfig/all shows: IP of Windows host Setup...: laptop Prim. DNS: Enter Mode: Broadcast IP routing enabled: No. WINS Proxy enabled: Ethernet adapter without Bluetooth network connection: media state: media disconnected Description: peripheral physical addr Bluetooth (Personal Area Network): Mac addr. Control Panel-> network connections displays LAN at the Connecticut 1394 network adapter (properties: peripheral works properly, driver: MS 07/01/2001!) Connection status: connected but 0 packet protocols: f. Client Microsoft NW File & Printer sharing TCP - IP - trying to hit the repair-> msg "TCP/IP not enabled for this connection") Conclusion: I think that my XP drivers are too old, or not DELL problem: I have no access to the network - minimum need drivers update for access to Internet, and then upgrade to download that/those pilot on a Non-Dell PC then CD, then install on the laptop don't know DELL HW, used Service tag to find 11 drivers, drivers resp. 75 for that I think it's a driver of 'network' - but don't know what or any other suggestion? Thks for any help Peter

  Well well maybe it was because I realized that I needed to insert HTML
  to get my text with line breaks.
  But in any case the problem is solved by support group European German DELL who responded very quickly by there DELL Forum and help me great to go again. Thank you DELL-Dave S.
  Problem solved by:
  followind drivers downloaded from the CD, and then installed on D820
  WLAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=R257701&OSCODE=WW1&FILEID=2731111614&LANGUAGECODE=DE&CATEGORYID=NI.
  LAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=04VK6&OSCODE=WW1&FILEID=2731090506&LANGUAGECODE=DE&CATEGORYID=NI.
  Now using Ethernet and wireless network worked with access to the network, all the others downloaded drivers from the net.
  Viva

• How to view traffic on the network for window icon 7?

  In XP, whenever there is network traffic, the network icon flashes, but it does not Flash in Windows 7.

  I would like to know how do network icon flashes on window 7.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  This is a small app that will do it for you.  It does not need to be installed, just 'run' or 'open' the file and you will see the icon.

  I keep in my folder of OneDrive public to share with others.  You can get it here:

  Indicator of status bar of the network for Windows 7, 8 and 8.1

• OAS / provides access to the files for Internet Explorer browser

  Hello
  
  I would like to provide access to the files for browser Internet Explorer with a Url of type https://myserver.com:443 / photos
  
  How is this thing?
  
  Thank you
  A.G.

  Here's what you do:

  1. ensure that your /pictures directory is a subdirectory in the htdocs directory. By default the htdocs directory is $OH/Apache/Apache/htdocs. If you have directory default htdocs, so your images created under that directory place your files. If your photos directory will be $OH/Apache/Apache/htdocs/images

  -Edit $OH/Apache/Apache/conf/httpd.conf to make sure that you have following set of guidelines:

  AllowOverride All

  AccessFileName .htaccess

  Note that this is a security concern to set AllowOverride to all, then you should put carefully. See below for more details on the AllowOverride directive:
  http://httpd.Apache.org/docs/1.3/mod/core.html#AllowOverride

  -In your /pictures directory, create a file with the name .htaccess with a single line:

  Options + Indexes

  See below for more details on 'Options ':
  http://httpd.Apache.org/docs/1.3/mod/core.HTML#options

  -C' is this, restart your OHS (Oracle HTTP Server) and access after URL to see the list of directories:
  http://myserver.com:7777 / images

  If you want to list directories only happen via the SSL port (443), then you can have above guidelines defined in in $OH/Apache/Apache/conf/ssl.conf.

  Thank you
  Shail

• Access to the network in all virtual machines lost after that put 8.1 to level.

  Today, I upgraded my host computer to Windows 64-bit Pro 8.1. I did the upgrade through the Windows store. There are no errors or problems during the upgrade.

  However: The host machine equipped with a Qualcomm E2200 network adapter, and it runs the 'Killer' Network Manager software called at startup. After the 8.1 update, when the machine did its last restart, Qualcomm Network Manager opened with a message that the LSP has not mapped correctly. I clicked 'YES' to remap it. Probably a stupid move on my part.

  Thereafter, I lost all network connectivity in all my virtual machines. I have virtual machines for Windows 8, Windows 8.1 RTM (not the preview) and Ubuntu 12.04 LTS. ALL of them have lost the network.

  The host computer has no network problem and works well after the upgrade.

  Any ideas or suggestions to reset network connections in virtual machines?

  All virtual machines are set to use NAT.

  Oh I have to say also that the host computer is running VMware Workstation 10 and everything was fine and dandy, has never had problems at all until this upgrade/LSP remap thing. I have install VMware Tools in the VM of Windows 8.1, with no effect at all.

  Thank you.

  -J

  Two things, I'll try:

  1. go in the virtual network editor and restore settings. The culprit is probably the VMNet to NAT configuration.

  2. If this does not work, it seems that the virtual card for NAT does not somehow. The simplest workaround is to uninstall and reinstall the workstation.

• Photosmart 5520 lies on the network for the first minutes

  Hello.  I bought a Photosmart 5520 in November last year.  It was working fine until the scanner no longer works last week.  Still under warranty and after checking, it was a hardware failure, HP sent a replacement printer.

  Now try to put in place as I had with the previous (who worked with no problem), it seems to play up.  When I start by putting, it connects to my wireless network.  And, throughout all the time, he thinks that it is connected, showing the correct in its window IP address when asked.

  However, each computer attempts to connect to it can initially.  Then, after 3-4 minutes, we get the unavailable destination host.  I get this regardless of how networking is configured (static or dynamic IP addresses).

  For example, when I start the printer first, I can ping the machine no worries

  C:\Users\Ed>ping 192.168.1.9

  192.168.1.9 ping with 32 bytes of data :
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255

  Ping statistics for 192.168.1.9:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 2ms, Maximum = 2ms, average = 2ms

  And I can access the printer from my browser.  But, wait a few minutes, do nothing, and then ping fails

  C:\Users\Ed>ping 192.168.1.9

  192.168.1.9 ping with 32 bytes of data :
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.

  Ping statistics for 192.168.1.9:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Note that the ip address assigned to the machine (and what is displayed across on the screen of the printer) is 192.168.1.9.  Ping still displays a reply from 192.168.1.10 (which is actually the IP address of the computer, I connected to via the USB connection).

  I did the normal stuff to turn off the router for 30 seconds, and it makes no difference.  What can I do to keep this work properly?

  Thanks for any help.

  Hello Nicolas and welcome on the HP forums!

  I see you have a Photosmart 5520 which has been recently replaced for a hardware problem and now the replacement seems to have problems with your wireless network. I'm sorry to hear that, but I'll certainly do my best to help

  Because the first printer did not have the same issues, it would be reasonable to assume that this printer is just being meddlesome, (most of the time, anyway ) with which I ask, have you tried to restore default network settings and then reconnect the printer to the wireless network? Otherwise, to restore the default settings of network on the printer the wrench on the top touch right, touch wireless and then scroll down to network by default. Once that is done, try to reconnect the printer to the network and see if it does the same thing.

  If this does not change the behavior of printers on the wireless network, please make sure that it is get the latest Firmware and updates.

  If that isn't also solve the problem, we will have to try a reset of the printer. If the first two suggestions don't help, please read this privacy statement for HP and I will reply with a reset of your forums Inbox.

  Let me know how things are going

• map of access to the network denied on vista drive home premium

  try to map on cdrom dvd to boot windows xp and Notepad of windows 7, I can see both network drive. on vista, I gave permissions for each account indicating the article beforehand and I get always permissio denied. I logg on and passwords. I can't go to the other readers on vista, but no pc can go to my full permission mapped /shared/ / dvd cdrom. window Starter 7 note can go on the cdrom dvd on my windows xp machine. tried different microsoft registry entries - no joy-nero burning rights is defined for everone. can anyone there help seems to be a heavy workload problem other people have problems as well. Please can someone help.

  more > dvd properties have not a tab security on it, so I can't take property etc. of notebook of the icon/properties mapped to the advanced security settings, the current owner said "unable to display current owner" and I have no right to change it to take control of my notebook, when looking for tab titles for dvdcdrom there is no - is this my problem? installed dvdcdrom has not been given a tab of vista security? If the property is "nobody" so no other pc can access. -more than information - put a dvd in and share a folder on the dvd do not share either due to denial of access.

  foregoing >:-question:-how to set a security 'owner' in the registry for my vista re security settings dvdcdrom. so that the other pc can map to it.

  hereme is here.

  Hi hereme,

  1. how many computers is there is the same network?

  2. Why do you map CD\DVD drive?

  Instead of map the drive, you can share and check if it works.

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  If you want to map the drive to see the link below to a thread with similar problem and try the steps mentioned.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/2b3a4276-F078-4C67-9867-085d10765b28

  Note: Don't try the first step of the thread above that you are using Windows 7 starter edition.

  See also:http://support.microsoft.com/kb/947235

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.