Inspiron e1505 will not do anything.

I was given an inspiron e1505 and it not work when people who had it and put a way. When he took over the battery was dead and they plug and battery does not charge and it will not be powered with the AC adapter. There no lights come on nothing. The adapter works. I plug it into my other laptop dell and it market. So it isn't the power adapter. I know they told me the cpu over heated once because the wind was block with dust but they clean and it work after that.  What I've done so far is taken on the battery and the laptop on the left battery it unplug two hours and put everything back in and nothing happen. So I'm lost. Hope that someone out there may be able to help. Thanks for any help I can get.

You can try a reset:

Remove the battery, hold the power button for 30 seconds with the system disconnected and remove and reinstall the memory modules and hard drive.  Attempt to light only on AC - if it will be, but is not installed battery, the battery is defective part.

If it still doesn't turn on then the answer is probably here:

"I know that they told me the once over heated cpu because the wind was block with dust but they clean and it work after that."

All it takes is an episode of overheating damage to the motherboard.

Tags: Dell Laptop

Similar Questions

  • Dell inspiron 1525 laptop turned off and the sleeves to the top down and will not download anything

    Original title: inspiron 1525 will not download anything

    After being on my laptop for about 30 to 45 minutes it stops and it is very hot on the bottom.  It is not the battery.  She radiates from the bottom at the top of the computer.  I also can not download anything on this laptop.  I have checked everything and does not know what the problem is.  Any help is appreciated.  Thank you.

    Hi GayleMcClain,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3. what happens when you try to download? You receive messages or error codes?

    You can check first with Dell support about the issue in connection with laptop closed and heat thoroughly.

    Check the link for Dell technical support:

    http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

    Hope this information is useful.

  • Dell Inspiron 17R will not start

    Hey,.

    My Dell Inspiron 17R laptop 5720 was working fine until today, she won't start now. I had a virus, but Avira seemed to clean it properly, so I thought everything is ok now, but after restarting my laptop I didn't even have the "Dell" screen more. I've been Googling this topic for hours, but no one seems to have this kind of problem. Most of the users get stuck after the POST screen, but I don't yet get there. I just press the power button and that's it - laptop starts, but doesn't show anything. 1 out of 10 times, I managed to start and it works perfectly, even restart Windows it works then, but once disable us it probably will start again for the next 7-8 attempts.

    Things I've tried:

    -Remove the battery, hold the power button / stop for 60 seconds

    -In the course of running Dell Diagnostics (regular and thorough mode) test - it detects no error

    -Commissioning with or without battery

    -Flashing of BIOS (A14)

    -Reinstalling Windows, even tried Linux

    -Remove the strips of memory, trying to start with one stick (I had 2 x 4 GB) - will not change anything

    It looks like a problem that does occur from time to time. It is a hardware or a software problem? Is there anything else I should try before sending it for repair?

    Thanks in advance!

    Hi randomthings,

    I appreciate for all stages of misjudged shootings.

    I recommend you to disconnect all external devices. Turn on the system and check if there are codes of beeps at startup.

    Given that the system turns after several attempts, it may be due to poor nutrition or inadequate food, bad drive HARD or other hardware problem.

    A poor, distressed or inadequate diet is often the cause of this problem. If the hard disk does not have enough power during the first time the computer starts, it will not be able to spin the platters of hard drive fast enough to start the computer. However, if you restart the computer, two, three, or four times, because the platters spin already, he is able to get the drive to speed and able to boot from the disc. Try with an AC adapter / CC known good and control; If the problem continues, I suspect it is a HDD failure.

    Please, remove the HARD drive and turn on the system and check the status.

    Please find the manual for Inspiron 5720 in the following link:

    http://Dell.to/QhAcwN

    Come back to this post for further assistance.

  • I've recently upgraded to 7.0.1 but Pandora and Gmail keep telling me my browser is obsolete and Pandora will not load anything. Help!

    I have not upgraded for a long time and was probably on a 2.x version of somehow, but last month I finally updated to 6.x and since Gmail and Pandora have told me that my browser is obsolete. Can I still use Gmail but Pandora will not load anything.

    I have cleared my cache and I deleted cookies, but I still get the same error message.

    I use the features introduced in version 6.x, but even this site thinks I use 3.5.9.

    If I have to uninstall and reinstall, how can I do that without losing all my saved passwords and other information?

    Your User Agent indicates that you use Firefox 3.5.9. Click on "Details of the system more" to the right of your original question, then scroll down:

    • Your User Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; RV:1.9.1.9) Gecko/20100315 Firefox/3.5.9 GTB6 (.NET CLR 3.5.30729) CouponCabinToolbar

    Reset your User Agent by following the instructions in the following article.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • PC will not download anything

    been trying for a few days it will not download anything.and cannot find the reason why!

    * original title - I can't get my pc to download not allowhas something to do with security

    (1) cleaning you temporary folder (Windows 'Disk cleanup').

    (2) try a different browser (Firefox).

    (3) check the settings of the firewall of your AV software

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Windows Vista will not download anything

    Just my computer will not download anything everything first he start with free air or running pop up then when she finished nothing downloaded not file any where no error message I tried with two open or save, but no work.
    What is wong with this computer?
    Oh and I have very little experience with errors, I've been an of the best chance.

    Thanks for looking into it.

    Its ok now I just changed to google chrome.

  • Gadget screen appears on the home page but will not move anything to the homepage

    Original title: you had to send a solution to my problem of gadget #1194371707

    gadget screen happens on my home page but will not move anything on the homepage, you said you would email me a solution, but you responded never please, my case is 1194371707

    Delwyn salvation,

    Thanks for choosing Windows and thank you for providing an opportunity to help you.

    According to the description, you are having problems with gadgets.

    1. which browser is installed on the computer?

    2. have you visited a support Chat or call?

    3. What do you mean by 'will not move not anything to the homepage'?

    Since it's Forums Community Microsoft, unfortunately we have not information on case # 1194371707

    Answer to us if you are having problems with gadgets or any other problem of Windows, and we would be happy to help you.

    Good day!

  • DVD player will not play anything but is listed in the Device Manager

    DVD problems

    My DVD drive is listed in Device Manager but will not play anything and does not appear on my computer. I tried to install the driver, but an error message says the driver installation failed.  I use Windows 7.  Any ideas?

    Tried this?

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    The problem occurred after you update or install something?

  • My "installing update" is frozen at 0% and will not do anything else. It has been like that for about an hour. Can anyone help?

    My "Installing Update" bar is stuck and frozen at 0% and will not do anything else. Can anyone help? For about an hour.

    Hi Nathrotep,

    Close all processes mentioned below, re-launch creative cloud and share the results.

    • CreativeCloud
    • Adobe CEF Helper"
    • Service Office of Adobe
    • AdobeIPCBroker
    • Creative cloud
    • Installation of Adobe
    • AdobeUpdateDaemon
    • AdobeServiceInstaller
    • AAM Update notify
    • CCLibrary
    • node
    • The basic clock

    @KateGee, error code, try 201: troubleshoot Adobe Creative cloud download, install and update questions

  • Hearing will not play anything

    Help, please. I'm able to edit, but hearing CS6 will not play anything. It is said he plays - but it's not.

    Go to Preferences > Audio Channel Mapping and make sure you that your chosen unit is assigned to any view you are using.

  • Take the tool does not. Take the tool selected - can see the hand but will not take anything

    Hello

    I'm new to photoshop and I am currently working through the tutorials on Lynda.com to learn as much as I can, but I'm stuck at the minute. Tutorials wants me to use the Snipping Tool to move an image and no matter what I do nothings moving. I selected the tool and see that it is selected and that the needle moves on the image but it is not striking, no selection.

    I also did with the letter to select the capture tool. Once again, this works, but will not take anything.

    Any entry in this problem would be highly appreciated. Thank you

    Hi Clara-beautiful,

    Hand tool is running when your image is enlarged and that you want to move to a specific part of the image.

    You must move your image with the mouse after a zoom once you have selected the hand tool.

    Are you a person following the same steps in workflow or other?

  • Premiere Pro CC 2014 will not play anything.

    Today, I launched a brand new installation of first Pro CC 2014 upwards (this is a trial) on a new iMac (3.5 GHz intel Core i7, 32 GB of RAM, NVIDIA GeForce GTX 780 M 4096 MB) and my project that was working fine yesterday on my MacBook Air will not play anything. The images are all H.264 digital SLRs. My sequences won't play, won't play my videos, my merged clips will not play, my multi cam sequences will not play. You press play and the play button becomes a stop button, but nothing happens. I tried to log in as root, but it will not play there either. All images are sitting on an external Lacie 4TB thunderbolt drive.

    Any thoughts?

    I thought it might as well be the permissions... ends by it was something really simple, but that didn't make any sense.

    Audio hardware preferences has created the system to input/output by default. Transition to the integrated output fixed.

    No idea why the audio hardware settings would keep the photo playback, but there you have it. Thanks to the support of technology Adobe useful phone.

  • Reader of CD/DVD of Dell Inspiron 620 will not be open.

    Original title: DVD/CD does not open

    The other day I tried to burn a disc, something was wrong and the cd/dvd will not open. I used all of the stem to remove the CD. Now it says an error occurred while ejecting ' DVD RW drive (d). I uninstalled and reinstalled the drive, and made sure my drivers are up to date, they are, same problem. I need major help.

    FYI: I don't know if this means anything but I have a Dell Inspiron 620.

    The other day I tried to burn a disc, something was wrong and the cd/dvd will not open. I used all of the stem to remove the CD. Now it says an error occurred while ejecting ' DVD RW drive (d). I uninstalled and reinstalled the drive, and made sure my drivers are up to date, they are, same problem. I need major help.

    Whenever the CD/DVD cannot be purchased, it is longer practice of using the average pin hole. But this should be done when the computer is turned off as ejection outwardly replaces the internal control of the drive. Therefore, it is very likely that the problem arises.
    You can try this:
    Restart the PC-> press F2 when you see the Dell logo-> control if the drive is displayed in the summary of the BIOS settings screen. If this is not present, contact Dell support - the drive must be replaced.
    If it is present, try to press the eject button to see if the come out. If so, leave the BIOS settings, start Windows and check. The drivers will be installed by Windows in most of the cases, and if not, you can download it from Dell from the link mentioned by Manasa Sirahatti. In addition, if you use third-party programs to burn the disc, try to uninstall it and check. If it works, and then reinstall the program.
    The problem will be solved in most cases, otherwise, the disc must be replaced.
  • Firefox will not do anything. Not at all.

    Update Firefox, now it won't do anything. Web pages will not load, do not even have the 'connection '. ' message, no error message, nothing. Literally, nothing happens when I click on a link of type in a URL and hit enter, try to visit something in my story, etc. Other browsers work, internet connection itself is good, Firefox works fine on my other computer...

    I have been through all items in Support of Mozilla, search forums, etc. Tried all what I found - checked the settings on my firewall, various topic: configuration options, antivirus program, etc., so that 'work offline' is not checked, disabled addons, rebooted and reinstalled, etc., then that generally all the usual suspects. Nada. Made no difference.

    Any ideas/advice/suggestions/etc. ? Thank you!

    I had already done a clean reinstall of Firefox and created a new profile, that makes no difference in behaviour (lack of).

    I've also scanned with everything you mentioned except TDSSKiller, what I did today. None of them found something wrong.

    However, after being through the steps suggested here and in various relevant articles of Mozilla Support, it is now fixed. Finally, I came across this: https://support.mozilla.org/en-US/questions/974612 and I tried the solution proposed here, that fixed it. Firefox is now behaving himself and working properly!

    Thank you all for your time and effort to try to help me solve this problem, much appreciated.

    _____________________________

    In case it helps someone else in the future, here the solution since the previous post who ended up working for me:

    1. run cmd.exe as administrator

    2. Type "netsh winsock reset" and then press enter

    3. restart the PC

  • Optical drive will not read anything else professional films

    So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.

    I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.

    I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.

    Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.

    I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...

    If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?

    Good luck

    JB

Maybe you are looking for

  • Equium P200-1ED - Driver for Ethernet controller

    I reinstalled Windows XP on a Toshiba Equium P200-1ED (PSPB5E).My wifi is not working where can I find the driver? I've tried all the drivers of http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK&ID=smp-product-resul

  • The value of static output on PFI on USB 6366

    Hi all What I want to achieve is to save dedicated 8 DIO lines on dev USB6366 on port 0 for some specific application and use remaining 16 PFI lines control some external equipment. All I need is the ability to set some PFI line high/low within a rea

  • VISA of TDS2002B scope control

    We use Fluke METCAL for calibration. Using Windows XP Pro (updated SPs) I was able to set up and use a USB based TEK TDS1002 (A) O-Scope with VISA after update of the VISA of NOR-MAX portion. Now, I received a litter of TDS2002B TEK, but when I have

  • BlackBerry smartphones at & T Blackberry Priv unlocked phone will not refresh

    After the update to the support page yesterday about the availability of updates AT & T Priv, my phone unlocked brand phones (current carrier is Koodo) receives notifications of OTA update Blackberry software. The update will be deploying in the comi

  • QT and OpenGL not made

    I have implemented the example in the SDK of 4.8 Qt under opengl/cube. http://Qt.Gitorious.org/Qt/Qt/trees/4.8/examples/OpenGL/cube I have modified so that it works on the PlayBook (that is, do not use QWindow). It runs great on Ubuntu in Qt Creator.