Reader of CD/DVD of Dell Inspiron 620 will not be open.
Original title: DVD/CD does not open
The other day I tried to burn a disc, something was wrong and the cd/dvd will not open. I used all of the stem to remove the CD. Now it says an error occurred while ejecting ' DVD RW drive (d). I uninstalled and reinstalled the drive, and made sure my drivers are up to date, they are, same problem. I need major help.
FYI: I don't know if this means anything but I have a Dell Inspiron 620.
The other day I tried to burn a disc, something was wrong and the cd/dvd will not open. I used all of the stem to remove the CD. Now it says an error occurred while ejecting ' DVD RW drive (d). I uninstalled and reinstalled the drive, and made sure my drivers are up to date, they are, same problem. I need major help.
Tags: Windows
Similar Questions
-
Door drive DVD/CD of Dell Inspiron 530 will not be closed
I was in the middle of installation 3 disks of a game, when on the open disc 3, the door kept popping back. Thought it was a bad drive maybe, so I tried another disc, same problem. haven't tried any disc, same problem. I restarted, in the remake, he closed the door, but then reopened it upward once in operation. It will not be closed the door. I have to take out them and put it back in or is it turned and I need a new? It came OEM with the machine, says he works correctly in Device Manager. in properties, he says that's DVD + RW DH 16 - W15 aPBDS. If I need a new, where I can go to the web to find what I need?
Thank you.
Hey well, good news! Before I decided to replace it, I thought that 'let me play with him' and open the computer and tried to get out. Well, I got all the cancelled screws and plugs disconnected, but I couldn't drag him completely out of the slot, I tried several times without success. He would slide approximately 1/2 in. and then stop. So I gave up, he slipped into place, screwed it back in, plugged everything back in and voila, it works! I don't know what was going on. There was a strip of clear band they put on the machines when they send their, a thin strip through the logo Dell Isnpiron on top of the drive with a shot to the back corner, maybe the edge of the door that was contagious? I pulled it off. No matter what. It works, thank the Lord. But out of curiosity, how one removes this player? I couldn't go out for the life of me.
-
Dell inspiron 530 will not start 4 beeps power black monitor blue button solid yellow lite inside
I HAV a dell inspiron 530 inter processor duel completely stock w vista... when I push the button to switch the fan to come on the button lights up blue then u hear 4 beeps and inside ther is a yellow solid lite on next to the motherboard no power to monitor usb black fan and s stays lite on the back is green as it should b what is problem It can b fixd can I solve this w taking some1 working inside a computer im alittle above a recruit n do thx mike
maheisel
Four "beeps", could indicate a memory problem, if you are comfortable working inside the computer, try to open the case, remove and reinstall all memory modules and see if that makes a difference.
If you not comfortable working with the removal and the reinstallation of the components, then I suggest that you take the Inspiron 530 to a repairman.
Is the power button LED, blue constant or flashing blue?
Every change made to the 530 recently?
The Inspiron 530 convenience store and the diagnosis Codes are HERE the ADMIN NOTE: broken link has been removed from this post by Dell >
Bev.
-
Dell Inspiron 17R will not start
Hey,.
My Dell Inspiron 17R laptop 5720 was working fine until today, she won't start now. I had a virus, but Avira seemed to clean it properly, so I thought everything is ok now, but after restarting my laptop I didn't even have the "Dell" screen more. I've been Googling this topic for hours, but no one seems to have this kind of problem. Most of the users get stuck after the POST screen, but I don't yet get there. I just press the power button and that's it - laptop starts, but doesn't show anything. 1 out of 10 times, I managed to start and it works perfectly, even restart Windows it works then, but once disable us it probably will start again for the next 7-8 attempts.
Things I've tried:
-Remove the battery, hold the power button / stop for 60 seconds
-In the course of running Dell Diagnostics (regular and thorough mode) test - it detects no error
-Commissioning with or without battery
-Flashing of BIOS (A14)
-Reinstalling Windows, even tried Linux
-Remove the strips of memory, trying to start with one stick (I had 2 x 4 GB) - will not change anything
It looks like a problem that does occur from time to time. It is a hardware or a software problem? Is there anything else I should try before sending it for repair?
Thanks in advance!
Hi randomthings,
I appreciate for all stages of misjudged shootings.
I recommend you to disconnect all external devices. Turn on the system and check if there are codes of beeps at startup.
Given that the system turns after several attempts, it may be due to poor nutrition or inadequate food, bad drive HARD or other hardware problem.
A poor, distressed or inadequate diet is often the cause of this problem. If the hard disk does not have enough power during the first time the computer starts, it will not be able to spin the platters of hard drive fast enough to start the computer. However, if you restart the computer, two, three, or four times, because the platters spin already, he is able to get the drive to speed and able to boot from the disc. Try with an AC adapter / CC known good and control; If the problem continues, I suspect it is a HDD failure.
Please, remove the HARD drive and turn on the system and check the status.
Please find the manual for Inspiron 5720 in the following link:
Come back to this post for further assistance.
-
Windows VISTA Home Prem on DELL Inspiron 1521 will not start
Read the message below. It has been copied from another thread and the poster has been informed to start a new thread with his question. What is ironic, is that I have exactly the same problem on my Dell.
After downloading some updates to Vista my Dell desktop computer restarted and tried to load step 3 updates, it moves very quickly from 0% to 100% and then restarts, only to go back into the same loop of trying to set up step 3 and restart.
I tried the following, starting in safe mode, same results updates are trying to configure.
Auto repair, I am told by a message, it cannot be repaired.
System Restore, I have only 2 system shown to restore points and they are at the time of the upgrade, if I try these points to restore I get an error message.
I tried to reboot from the original installation provided CD but all I get is 'windows is copying files', then a black screen.
I tried the boot iso but neosoft option again to the message windows is to copy the files, and then the black screen.
I'm in thr stage where I can not think of anything else other that to go to a data recovery specialist, to recover the files most important (have over 200 GB of various things on the hard disk) and then reset to factory settings and load data and try and find the sources of all the programs that I had. It looks like an enormous task and it is the main computer for my business. If a kind soul has suggestions as to how I can get this situation somehow, I would be eternally grateful.
Thanks in advance
I'm fairly warned to get to a point to get my data before a complete reconstruction, however, I give that easy. Anyone else having this problem. I'd really like to find a way to solve.
Hello Jon LIndquist,
Thank you for using the Microsoft Answers forum. The link below has several options to solve a similar problem. Please use the link to solve your problem.
http://support.Microsoft.com/kb/949358
Thank you for using answers Forum. Please let us know how it works.Joseph
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My Dell Inspiron 530 will not light
The computer has been like that for a while now. When I have the power cable connected to the back of the computer the Green underside is on so I don't know if it means that something is supposed to happen. When I opened the computer there is a yellow light as well. But when I hit the power button to turn on nothing happens, fans did not move at all. And if I remember when I opened the computer there was a few stray wires disconnected, I tried for about 10 minutes around the motherboard to find that these cards could go on. I have found none. I followed a cord in the back and he went into the motherboard and fan and another went in a box (where the power cord goes into the back). These cords may not be connected when the computer still worked well, I'm not entirely sure about this. I don't have a lot of money to replace the points and I did well in computer science and more telling me instructions on what to do.
peterfaixAbsolutely nothing happens when I press the power button. The yellow light on the motherboard is immediately, without flashing what so ever. And when I said the green light is the I meant right where you plug in the power cord. It's on and stays green as well. No flicker.
peterfaixAs the power light button does not lite, better to replace the power supply first, as you need a diet 'known' work to check the system and motherboard.
As you have a mini-tower 530 standard ATX power supply units can be installed, with a 24-pin or 20 + power connector 4-pin main motherboard, with or without the on/off switch.You should be able to buy a compatible power supply either a local computer or online store.
Note: A power supply with four SATA power connectors, is necessary.
Power supply replacement procedures are here:
Bev. -
Vista Home Premium 32 bit on Dell Inspiron 530 will not start.
Black screen flashing in the top left cursor. Reference Dell say Windows software problem. The drives C and D OK. Is it possible to somehow start?
Passed all Tests OK.Very grateful for any suggestion.Sylvia,
Use the Windows recovery environment to be able to make repairs. Here's HOW
The guide above is for Windows 7, but it is the same for Windows Vista. You can use the system restore or startup repair in WinRE.See you soon ~!
-
Dell Inspiron 17 - will not start - get hard disk clicking noise
I am able to boot up the laptop to the BIOS (F2) and the laptop passes all diagnostics - I upgraded from Windows 8 to 10 Windows about 6 months ago and everything has been great to work - no problem at all. Then a month ago started the problem of loud noise clicking.
Here is my problem laptop > I start pressing the power on button - I can hear the fan start - power and the drive light - but one or two seconds later, the drive LED turns off and it's the disk hard clicking noise starts. I have to then press and hold the power button until the laptop stops. I can hear the stop of the fan and Park disk heads - then all the lights will turn off. Then I have to start this process all over again [sometimes more than 8 to 10 times] until the laptop finally gets up and allows me to connect.
Nobody knows what will fix this problem?
Hi FAYEDC,
Please write to the Dell Community Forum.
Please try to run Dell diagnostics onboard and capture messages or error codes.
If we can verify with another hard drive?
Please private message us the serial number of the system as well as your login email.
(Note: Please do not mention the id of service tag or by e-mail on the public forum because it contains your personal information).
Kind regards
DELL-Loïc M
Professional community and social media
#IWork4Dell -
Position of the jumpers pin on a MB from MIH61R Dell (Inspiron 620)
Hello and help!
I bought my wife a new Dell Inspiron 620. I was dusting from the inside and come off a jumper connector. It's a PIN of five (5) labeled PWRSW1 on the outside edge towards the end of the DIMM. The MB is a MIH61R. Can someone tell me the proper position for the rider on PWRSW1?
THX
Let's save a nano-second...
Need to ask if you are sure the rider was actually this 5 header pin motherboard? Could he have come off some other header?
I just ping Dell-Chris M to see if he can get some specific information for you...
-
Dell Inspiron 620/Vostro 260 NO Bios for AHCI
Dell Inspiron 620/Vostro 260 NO Bios for AHCI
Interestingly, I couldn't even update the bios without the INTEL drivers.
Check in the Device Manager, the machine uses the ATA drivers not AHCI drivers
AND will not install the INTEL RST drivers.
Why is this?
I tried to upgrade to the version of the Bios A04, but this made no difference.
I did some research and discovered that the chipset in this system, the H61, simply does not support AHCI or RAID. There is no way to activate for a reason. :(
Wish I had known this. The value of this system really went down the tube if you intend to launch an SSD in there.
-
How can I driver me for Dell Inspiron 620 missing network controller
How can I driver me for Dell Inspiron 620 missing network controller
On the Dell support site, specific to your tag #.
http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-620
-
R9 270 x and power supply in a dell inspiron 620 for $200 after rebate?
So, as you can see in the image below, you can certainly hold a 9 inch gpu in this computer that the 270 x im is less than 9 inches for fitting will not be a problem.
en.Community.Dell.com/.../4571.620VID.jpg
The needs of 500 watts and 2 6 pin connectors PCI card this power supply has
www.superbiiz.com/detail.php; c = CJ<----- link="" to="" graphics="" card="" ($169="" after="">----->
www.newegg.com/.../Product.aspx; cm_re=atx_power_supply-_-17-438-016-_-product< -----="" link="" to="" power="" supply="" ($30="" after="">
So the question is will the PSU and GPU work in a dell inspiron 620 with 8 GB of ram i5 2310 and 1 TB of memory?
jojokidc
The EVGA 100-W1-500 - KR 500W ATX12V / EPS12V 80 PLUS certified Active PFC EVGA 100-W1-0500 - KR 3 PSU should fine in Mini Inspiron 620 Tower.
As must the Sapphire DOUBLE-X AMD Radeon R9 270 X OC 4 GB GDDR5 2DVI/HDMI/DisplayPort PCI - Express video card, offering space, especially since the locations of memory and the hard drive Assembly.
Bev.
-
Here is a link to my desktop specs
www.findlaptopdriver.com/Dell-Inspiron-620-specs
Here is the link to the graphics card
pcpartpicker.com/.../EVGA-Video-Card-02gp43751kr
I'll be able to use this card with my power source for original office or will I have to buy this power supply?
pcpartpicker.com/.../EVGA-Power-Supply-100w10430kr
Final of the question how will these buys a positive impact on my pc?
jojokidc
Yes, the EVGA 02 G-P4-3751-KR G-SYNC support GeForce GTX 750 Ti 2 GB 128 - Bit GDDR5 PCI Express 3.0 video card should work fine with the default 300w power supply.
http://www.EVGA.com/products/product.aspx?PN=02G-P4-3751-KR
Bev.
-
Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.
Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer. Maintains documents in the print queue and print them when the computer is restarted. In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.
Hello
Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.
Please answer the following questions that would help us provide a better solution.
What version of Windows are you using?
Try to follow the steps and check:
Step 1:
Visit the link following if you are using Windows 7.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
If you are using Windows Vista, see the steps mentioned in the link.
http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems
Try the steps from the link following if you are using Windows XP.
Resources for the resolution of the printer in Windows XP problems
http://support.Microsoft.com/kb/308028
Step 2:
Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.
You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Put the normal computer as mentioned in step 7 of section.
Step 3:
About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Please feel free to respond if you have any other questions, we would be happy to help.
-
New error message to see article 871122
All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.Hello
1. you are using a wireless connection?
If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
http://support.Microsoft.com/kb/283658Also check this link for troubleshooting steps:
http://support.Microsoft.com/kb/314095It will be useful.
Maybe you are looking for
-
Sat 1900 - CD/DVD drive does not work properly. How to solve this?
Hello :-) I have a Toshiba Satellite 1900, bought in 2003. It has a cd/dvd drive called MAST * UJDA720. For the last 3-4 months he was not working properly with movie DVDs. whenever a movie starts, it does not work smoothly, but in stop-and-go. First
-
Data not displaying DAQ graphic not
Hello world! I am writing a program to collect data from a force sensor. I know that the data is properly entered into the right values, but my paintings are not display data. I even used a sample program from the manufacturer of the force sensor, li
-
Blank CD force Windows XP system to reboot
When I want to burn a CD and I put in a blank CD, when the system reads it, the system restarts, but then if the CD is still in the drive it does the same thing again. This occurred regularly, but now he's doing every time, with boith my DVD players
-
Configuration required to use deskot as a target time real labview
-
Cannot open the small metal door covering the memory cards.
I have HP Pavilion dv laptop 8309. I can't open the door/lid metal articulated with 2 screws covering memory cards. I removed the outer cover. Has anyone run into that. I tried out the screws but they keep just spin and spin. I can't access the