Similar Questions

• Dell Inspiron laptop power button problem

  I have a dell Inspiron laptop. The power light blinks orange then white, does that mean?

  Hello

  When you encounter the issue?

  I suggest you to contact the manufacturer of your laptop can help you.

  http://en.community.Dell.com/support-forums/laptop/f/default.aspx

• Size of the Inspiron laptop power connector

  No one knows the size of power on new computers 3000 Dell laptops Inspiron 15 series connector? Old laptops Inspiron uses a size of 7.4 x 5.0 mm connector. The news that I have, which is a model 3225, is much smaller.

  Thanks for your help,

  Jim

  Thank you ejn63 and sparksdls for the quick responses, that's what I was looking for!

• Satellite A660 how can I turn off the light on the power button?

  Hello, I recently bought a new Toshiba A660-1FL.

  However mind, lighting of the multimedia keys, if I work in the dark.
  In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.
  This laptop has two power LED, so the lighting power is in my view, unnecessary.

  My question is: How can I turn off the light on the power button?

  Hello

  The power button led cannot be disabled.
  It s there if the laptop is turned on.
  The lighting in the BIOS option only controls the multimedia keys...

  Welcome them

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• power led on the rear of the computer the power button / stop turns on, then turns off.

  I have a HP TouchSmart 610-1015xt.  The light on the transformer power is on, but not exactly brilliant (I think it's good, but not sure).  The light next to the power input is on.  When I plug in the power, the power led lights up for a couple / few seconds then turns off and does not turn.  At no time the computer capable of running and it does no whether noise (no fans, no beeps, no attempt to start.

  Any suggestions?

  Figured it out.  Apparently I have reset the battery internal and then unplugged the power button circuit and then he started upward.  The only problem is that now it will restart automatically every time it is closed or even sleep.  I'll start another forum on this issue.

  Thank you for your help.

• 15 170tu ac: I HAV to press the power button several times to start the laptop...

  I HAV to press the power button several times to start the laptop... works well with the power supply on.

  all My drivers & bios is updated... but when I opened the lid... I HAV poer press several times the button and he then began 4-5 min.

  Hi @Vishalwagh123,

  Welcome to HP's Forums a great way to get help. It's a great place to find answers and advice! Thanks for the post.

  I understand you have questions turn on/off the device and you must press the power button several times for him to start. I'll be happy to help you.

  Please try these steps first. Perform a hard reset.

  • Steps to do:
  • Turn off the computer and unplug the charger. Then remove the battery.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.

  If it fires up immediately the issue is resolved. Otherwise, try to turn on the computer without the battery and check that it works immediately.

  In your message, you said that it works very well with the charger. However, I need more clarity here to help you better.

  It works immediately when the adapter is connected and the power button is pushed only once?

  If you again press the power button several times, it may be a faulty power button, and you will need to contact the hotline at the service of the unit.

  Let me know what happens when you try to turn on the unit without the charger?

  Visit this link to contact support phone:

  http://HP.care/2bjG4nE

  Hope the problem is solved without hassle. Please keep me in the loop.

  Take care and have a week Holy.

• Laptop does not turn on but the power button is on ip

  I just bought my HP Pavilion 360 less than a month ago and it's been used for research and schoolwork. No virus or threats have been detected. It was working fine today until I had to load it. When it was fully charged, I turned it on and the screen just frozen. I tried to shut down by pressing the power button, but it did not work. Now, to just black screen but the power button turned on (meaning it's on). What should I do?

  1. don't remove the battery from your laptop

  2. just to unplug the AC power from the laptop adapter

  3. press and hold the power button on your laptop for 1 minute

  AFAIK, this should make the difference

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Cannot shut down Windows 10 laptop with power button / stop

  I have a laptop Aspire E5-532 with Windows 10.  I have configured the power management to turn off the laptop when I push the power button.

  It does NOT work.  When I push the power button, nothing happens.

  Help!

  I thought about it.  Press the button for a few seconds so that the system recognizes the button push!  When cela all functioning properly.

• Acer Switch 10 i. put powered w / power cord, power button + volume Up/Down ii. No LED light

  Problem:

  Power does not illuminate. 75% battery charge. A tried
  a. power switch button
  b. power button + volume Up/Down button for 60 seconds (technique of being able to be in hibernation mode)
  c. a/c power cord... light to show load or power not turn on AND the Tablet does not become hot... in other words, Tablet accepts no power coming from being plugged into an electric outlet

  Solutions to be able to put it back on

  1. perhaps central card mother battery died... Well, in the past my LAPTOP would work with single power supply and no battery... but... it is a tablet that works maybe like a mobile phone because if the battery is dead, then unit does not work until the Central battery has sufficient charge

  2. maybe an electrical circuit problem?

  3. may reset a deep sleep mode?   ... but already there is a technique of this situation and I tried it.

  4 perhaps, software power settings but if are unable to start. can't get to the BIOS.

  Thanks much for any help.

  Solution... it was an electrical problem, capacitor w / low-Volt charge had gone below this threshold to function, voltage decay over time.  Replaced.  Laptop as it has done before does not.

• HP-G62226TU: my laptop won't turn on when I push the power button

  Hello

  My laptop does not turn when I push the power button / stop and nor adjacent to the plug adapter lights turn on when I put the power supply. It behaves like completely dead. I pressed the button for 30 seconds as suggested in the following thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/my-laptop-won-t-turn-on-when-I-...

  My laptop is 2.5 years old and was working fine without any problems so far.

  Please suggest.

  Thank you

  Himanshu2303 wrote:

  OK... I learned to get the motherboard changed. How much it will cost in India for my laptop?

  What do you suggest I should do?

  How much will it cost in India?  I have no idea. I live in Europe.

  I suggest to ask a repair shop of PC or laptop.

  If the cost of repair is more than 50% of the current value of the laptop, you would be better sourcing of a notebook replacement.

• My laptop will not be closed unless I have press and hold the power button

  Computer laptop MU shut unless I press the power button. There is no closing

  Go to control panel-> Power Options control. Click on choose what the power button and the click of the left mouse.

  Look at the options. Select other options to test.

  Also, see the documentation that came with the computer or the web site of the manufacturer for other possible options.

  It is possible that the laptop tries to install updates and the process is blocked somehow.

  Tom Ferguson

• Stop shuts the laptop Windows 8 - FAN, power button light & Toucpad Light we

  I have HP Pavillion DV6 6140Tx

  Install Windows 8 Enterprise Edition and update drivers using the drivers for Windows 7 64 x on HP site

  The problem is that when I stop my laptop, isn't it shutsdown, it turns off the screen, but not the movement of processor, fan, touchpad, the light and the fan is on and it never stops.

  Then I force press n hold the Power button to stop it!

  There's also a problem of delayed start!

  But the function of reboot everything works fine... !

  I have not graphics drivers installed on the system - its AMD ATI RADEON HD 6700 M - no useful driver available!

  http://support.HP.com/us-en/document/c02948560

  Download the BIOS update given and the mentioned graphics drivers

  and it worked after restart!

  Card detected graphics and portable shutsdown even without problem

• h [p 3745 printer does not print. New laptop HP Pavilion. Windows 8. Power button on the printer flashes.

  I have a new laptop. HP Pavilion g6. I have HP deskjet 3745. USB cable the printer plugged into the laptop. Outside the printer power button flashes.

  Try a hard reset. Unplug the power cord at the back of the printer and the wall, wait 30 seconds then plugg back.

  Make sure that the printer is connected to the wall also.

  If it does not work. Turn the printer off, unplug the printer power cord to the back of the printer, and then remove the cartridges. Reconnect the power cord wait 30 sec then insert the cartridges.