instalation of lightroom6 rejects installation on Windows 7 with note that windows vista is not supported
I tried to install Lightroom 6 on my Windows 7 system
The installer jejects the Installation with the remark that Windows Vista is not taken in charge by this product
Is - this known issue? Any solution is available?
Thanks for all your ideas,
the solution was simple in case you know. The Installation CD includes an additional folder "Win Support files", where annother exe file is included. Using this exe file implementation of work.
Could be better designed by Adobe.
Concerning
Michael
Tags: Adobe
Similar Questions
-
I installed it over 5 times. I get a message that I have a significant update to install and it's the same sp1 (KB936330) that I have already installed.
is there a reason for this?Why you responded to my message? I'm not the one who had the problem...
-
Help to perform a new installation of Windows Vista 64-bit.
Original title: Clean Install.
I am wanting to perform a clean installation of Windows Vista Ultimate 32-bit. I would like to install Windows Vista Ultimate 64-bit. I was told, during the custom Setup, that I could choose which bit to install.
Hello
With Vista, you do not boot from an external drive to install it.
It is an option in Windows 7.
And they told you to contact Microsoft for support.
Microsoft does not provide support for OEM installations.
In Vista, 32 bit and 64 bit come on different DVDs.
See you soon.
-
the installer of Windows vista stoped working how to fix
The udate Windows Installer has stopped working, how do I fix
Hello
1 did you changes to the computer?
2. do you get any error messages?
Method 1:
See the following Microsoft site:
How to solve problems when you install or uninstall programs on a Windows computer
http://support.microsoft.com/kb/2438651#reso1.
Method 2: Start the service
Follow the instructions below to start the Windows service install.
a. click on Start
b. type services.msc and press on enter
c. find Windows Installer
d. right-click on it and start the service
e. replace the Automatic properties type.
Method 3: Run scan SFC (System File Checker)
See the following site:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.microsoft.com/kb/929833.
-
Original title: "WindowsUpdate_00000490" "WindowsUpdate_dt000" Vista Service Pack 2 update
I tried to install Vista service pack 2 (32-bit) and I get the following error "WindowsUpdate_00000490" "WindowsUpdate_dt000" I tried to install with my anti-virus disabled and uninstalled and still it will not be installed. He always tells me item not found, error: ERROR_NOT_FOUND (0 x 80070490). What should I do?
Hello
You can try the steps in the following article and try to install the stand-alone package for Windows Vista SP2.
You can also consult the following articles and check.
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
-
Original title: after the new installation of windows Vista it does not work.
After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.
Hello
Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site
go to their website and look for a driver and software download section
Enter your model number for the last look drivers vista then download and install
If you continue to have problems with it contact lenovo
-
Second installation was successful, but the installation failed initial always appears at startup upward. At a complete loss to know where to find entries that say my system there are 2 installs of Windows Vista. When launched the CD to 'view' where this "alternate" install is shows unknown HDD to address 0 w a lack of disk space. Of course, it is more than likely that only some files in the registry or the system "ask" that there is a current installation. Where can I find these to remove them? Have not found anything on any forum re: this issue. TYVM<3!>3!>
I see that a "MVP" edited the title of the question, but it did NOT reflect what the question. Please leave the full question in the title of the post. My problem is not a simple installation of 'failure '. I just want to find out where the entries are which are originally to show 2 Windows Vista o/s when I 'start' my computer when there are 'only' real installation. Note: I have two we HARD a WinXP Pro, the other Vista disks. At the start, it shows "Versions of Windows" and then Windows Vista and finally Windows Vista again. The non-existing o/s installation failed is the 3rd entry.
Modify the boot.ini file to remove the installation failed (make sure that you remove the right pair) or in msconfig, check the boot paths
-
trying to do a clean installation of windows vista by using the dvd
I am trying to simply destroy my computer and start clean using the reinstall DVD supplied with my dell PC. It has windows Vista Home Basic on it. When I put the DVD in its loading and a window pops up asking if I want to install and I press Yes. After a while a box appears that says I don't have enough storage for temporary files. He needs so many megabytes of free space on a partition to be able to load the disc. the problem is that I have NOTHING on the computer, there should be more sufficient storage space! How can I get the DVD to run?
Hello
If there is no data on the computer, then you can try to format the hard drive and then install vista on it.
See the articles below:
Install, reinstall, or uninstall WindowsInstallation and reinstallation of Windows Vista
Installing Windows: Frequently asked questions
Solving Windows installation problems
Windows Vista system requirementsThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Keyboard output incorrect characters after the re-installation of Windows Vista on Dell XPS M1530
Original title: some of the keys on the keyboard messed up after re-installation of Windows Vista on Dell XPS M1530
Hey guys,.
I have recently reinstalled windows because last year I picked up a few errors that I couldn't fix it easily and I wanted a clean slate.
I have install all the drivers etc, but I noticed on my keyboard, if I try and make a "sign it comes up with a sign @ and vice versa." There are also others like that, so I guess that my keyboard readers need to update? Although I have no idea why they would need updating as they were before.
Anyway, I went here: http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=XPS_M1530&os=WLH&osl=en&catid=&impid= and I tried to find the driver I need, but could not find them.
So, overall, my question is should I update the drivers? If so, how?
And if not, how can I fix?
Thank you. :)
Hi cripple.
Thank you for your message.
Was is happening until you have reinstalled Windows?
How do you reinstall Vista, what steps did you take?
What is a wireless keyboard?
If this is the case, check the batteries and make sure that the keyboard is very close to the receiver (a few inches) to see if the problem resolves.
I suggest updating your anti-virus definitions and run a fun system scan.
You can connect another keyboard to your computer to see if it might be the fault of the keyboard?
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP G4 1303 at THE: the screen is blur after the installation of Windows Vista
Hello
Recently, I uninstalled windows 7 ultimate and installed Windows Vista (32 bit) , because my laptop was /hangig of blocking in Windows 7.Now my laptop runs smoothly, but when I play the vedios on my system through Windows media player / K-Lite player, the vedios fading little. The same problem that goes on when I watch Youtube vedios or photos even... This was not happening on my previous windows... I installed all the drivers in my Device Manager shows no warning...
The adopter of my screen is AMD RADEON HD 6480 G and sound have been updated...
kindly tell me what I need to do
Hello:
In the Device Manager in the category graphics cards is the AMD RADEON HD 6480 listed G graphic card, or is that just an adapter VGA Standard listed there.
If there is an adapter VGA Standard listed there that means you need to install the graphics driver AMD for Windows Vista.
If the graphics card Radeon HD is listed under the category of display device manager cards, then the only suggestion I can offer would be to download and install the latest version of Adobe Flash Player and see if that helps any.
-
Recently, I received 646 error code when you try to install the important/automatic updates to Windows Vista. What patches are there for this issue? What risks are there to do not overcome this problem?
rivercitylady,
Usually with the code 646 error, if you download the update and install it manually that will fix the problem.
Go to the Microsoft Download Center and search for the number of the update has failed. Download on your PC, then run it from there. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.
I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.
How can I fix the corrupted windows components store?
Thank you
Dan
CMDC,
If the SFC was not able to repair files then the best thing to do is to reinstall Windows. You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool. If there is still a problem with the SFC nto be able to complete then you should do a reinstall.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).
does anyone know how to go beyond this error?
Thank you.
Moved from Vista to install, upgrade and activate Forum.
Take a look at this thread:
-
can I install virtual server 2005 R2 on windows vista family 32-bit
Hello
Please can you tell me if I can install virtual server 2005 R2 on windows vista 32-bit family, because I'm trying to do, but an error apears "virtual server not supported by windows vista" knowing I have install all IIS services
Please give me a solution
Thank you
Hello Me force,
I suggest posting your question on our TechNet forums located here:Thank you! -
Hello world
I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.I would be very grateful if you could help meHello
I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Let us know the results. We will be happy to help you further.
Maybe you are looking for
-
Re: Qosmio F50 - 12W - front buttons have stopped working
Hi, I am the F50 - 12W. It is under Vista Home Premium. First thing I did was to go through the list of services and the vista settings, turn off everything I don't don't need or use. Worked a treat. But... Only problem now is that I managed to stop
-
low current strength using 4132
Hello What is common the lowest that can be forced by using or pxi-4132. I want to force 5 AU to measure the tension through our DUT. However, when I tried it making the tension values were really high. I was supposed to read a value of less than 4 v
-
How collation file version lvbitx compiled?
Hello The specification to build for a lvbitx FPGA file to set the Version numbers (Major.Minor.Fix.Build). However, I don't see how to read this information from the compiled bitfile. With a DLL you can right click in windows (W7 64-bit) and propert
-
0X800A0007 error MESSAGE while WIndows Update perforaming
Original title: 0X800A0007 error MESSAGE updated Windows through Custom update this error message 0x800A007 and it won't let me update.
-
I am trying to upgrade to windows 10 but unfortunately, the system came with a bios password that nobody seems to know