install a deskjet f4200 all-in-one

Similar Questions

• Unable to install printer Deskjet F4280 all-in-one Windows Pro 8.1

  A week ago my laptop with Windows Pro 8.1 was a significant error and he stopped, then I restarted the operating system with a previous image of the hard drive C. I reinstalled another printer and I tried very time to reinstall the HP Deskjet F4280 all-in-one with the latest driver and with the installation of the Printer Wizard uploaded by HP web site. Unfortunately every time installation fails during step "product configuration" after a lot of minutes to expire. The error was the last time.

  CSetupWrapperApp: No section name specified on the command line
  = Application did not return ERROR_SUCCESS. Returned 0 x 1
  LaunchApp (x:\hpqtra08.exe-arret, 1, 00000000, 00000000) failed with 2
  Error opening key HKLM\SOFTWARE\Hewlett-Packard\Install\{8C925017-72A8-4C4A-AF21-84901E26638F}. error = 2
  Timed out waiting for event of finished product.

  I used your HP print and Scan doctor and I followed all instaructions and in the end, no solution has been discovered. Other applications normally run without problem and laptop works fine. I installed Windows Pro 8.1 almost a year ago and until a week ago, I have no problem with the HP printer above. I can solve this installation problem?

  Best regards

  Francesco Patrignani

  Multifunction,

  Thank you for the update. The registry document I sent should apply to all computers in Windows 8. Please try to follow these steps.

  If you do not provide the error log, which could be very useful. This will help me to refine the question. Also, I do not fear spend 20 minutes reading code until something is different.

  I will help you with pleasure until the issue is resolved. If you find my help, you can keep tagging my posts with congratulations and accepted Solutions. It would be appreciated.

  Have a great day!

  Mario

• Unable to install HP Deskjet F4500 all-in-One Series

  I'm trying to install the HP Deskjet F4500 all-in-one series software on my 15 HP 8.1 Windows 64-bit machine.  When I run the Setup, during the activity to check system files, I get a message error "cannot find file system' Appdata\Local\7zs39b6\Temp\hpzshl...

  

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• To re - install my web download drivers for my Deskjet F4280 all-in-One Printer

  I have installation problems with my Deskjet F4200 all-in-One printer on my Windows 7, Home Premium desktop PC / 64 bit version & I had, once last month, uninstalled my I bought online for my version of platform & bit of the os, printer drivers & all program of printer drivers have been uninstalled successfully in the programs section and my control panel features except for :
  HP Software IDF.

  I ended up, in addition to the tasks above performed & completed, deleted all files remaining hp of my drive (c).

  I discovered a web page of troubleshooting on the hp.com Web site, under the following title:

  ""Of HP Installer has stopped working "or the installation program does not run when you install under Windows 7 HP printing software"

  on the following web page: "http://support.hp.com/us-en/document/c03030583".

  My processor information:
             "AMD Athlon II X 2 240 processor / 2.80 Ghz '.

  I tried to re - install my drivers for my printer, & have problems trying to re - install, with no luck.

  I have read the following information since the last link web I mentioned (SHOWN above and here @: 'http://support.hp.com/us-en/document/c03030583') trying to follow them to correct my problem exact, but without success.

  If anyone who reads this could have a solution to my problems, please contact me either by one or more of the following methods:

  {Deleted private information}
  

  Thank you, Christopher Canfield.

  The troubleshoting document you provided a link to not tell to use the hotfix with the processor installed in your desktop PC.

  Have you tried to use the Wizard for Windows HP printer installation?

  I recommend to try it. It can solve the problem you are experiencing.

  If it is truncated, without success, then click on the following link and select Windows 7 from the list provided on the HP document.

  Uninstall the HP printer software.

  Once you have completely uninstalled the printer software and driver, run the HP printer install wizard again.

  Please keep us in the loop by posting your success or lack of success with the installation of the software of the printer here in your thread.

• F4200 all-in-One scanner all of a sudden does not work

  I was very happy with my HP Deskjet F4200 all-in-One printer/scanner.

  Suddenly today the scanner refuses to contribute.

  I get a report:

  ERROR

  Cannot perform the analysis because another program has control of the HP imaging device.  Try the following steps.  After each step, try to scan the image.
  -Restart the program.
  -Close all programs that might be using the device.
  -Restart the computer.

  I don't have any other program open.  I closed the printer/scanner program, shut down the computer - but remains problaem.       What should I do now?

  Uninstall and reinstall?  Or something else?

  Please someone advise

  Ruth

  Hi @Rufels

  I'd love to help you boost your F4200 analysis. The following document addresses the issue you described; "Another program has control of the scanner" Message appears on the computer when scanning.

  I hope this helps.

• HP Deskjet 1510 all-in-One help! Will not install

  Hello

  So I bought a new printer (HP Deskjet 1510 all-in-One help) my Windows 8 Acer laptop, but it won't install. I tried the disc and online, I tried the help-majig trick but it won't install, when it says 'Install impossible' I click on details but it just comes up with "Installation Failed"... Yes, thanks for the help, Captain Obvious!

  I tried multipul times, upluged absolutely everything and rebooted my computer, but nothing happened.

  Help, please!

  -Sammie

   

  Hello

  Right click on the usb printing support in Device Manager and you get an option to update the drivers,

  Please select this option, it should update the usb drivers.

  Concerning

  HP

• HP Deskjet 3070 (All-in-one/Wireless) install problem Win 7 64

  Hello world

  I wonder if others have had similar problems or ideas on the underside, surely I can't be the only one to use this installation/suffering with this problem.

  Printers: HP Deskjet 3070 All in One (USB/Wifi)

  Operating systems: Windows 7 64-bit (installed absolutely fine on Win 7 32 bit laptop computer connected via wifi).

  Setup: - a Homehub BT, providing WiFi for laptop (Win7 32 bit), a desktop computer (WinXP SP3), the printer has an IP address, which is visible on the home network map - it has a MAC address also. My PC: connected by Ethernet to the homehub which is currently running wifi for all of the foregoing.

  Drivers using downloaded: -.

  + Computer laptop Win 7 32 bits connected via WiFi to the Homehub - installed fine, found printer - this is the stage where the printer receives a configuration intial IP address / completed.

  + WinXP SP3 connected through WiFi to Homhub - as above, correct, opportunity driver found the printer (which, at this time already, there).

  If the printer exists within the network, other computers can see / use it.

  ++ My PC: Win 7 64 bit connected by ETHERNET to Homehub (she does not and will not have a wireless option).

  Downloaded the drivers to install HP. (later tried "Run as Administrator"), select the software components (i.e. Remove feedback/coupons etc), installs OK applications, next step is the configuration of the printer. Add a new printer. "Check network" window appears with the message "Checking network environment" bar and the State. The status bar springs upward but stops dead at the filled Stadium. No possibility to choose whatever it, pressing Cancel has no effect. End of task here generates an error of 'work '. 'devicesetup.exe' stopped The installer never ends, applications are installed, but at no time, it shows the printer/selection.

  I tried many things: complete uninstall "engines", which in this case seem to be the only applications, ensure that all non-essential startup items are disabled, make sure that the firewall is DISABLED (just to be sure), ensure that the anti-virus is disabled there is, in fact, no other printer installed (this computer never had a printer attached to it) make sure file sharing and printing are powered, ensure that there is no TCP/IP/ports printers mapped etc... Still the same error, old or new drivers, always the same - installation does not complete.

  All the doctor diagnostic tools/printing tell me I have to install the driver software (I agree) but direct me to the HP site to download the ones I already have.

  I can't enter the Server Web integrated (the PC where I can't install the drivers, or one of the 2 PC's who have installed correctly). One of them if I click on networking or wireless or advanced it warns a HTTPS connection and then fails with "internal server error".

  My questions to someone kind enough to read this wall of text: -.

  + Anyone has any ideas please? I would prefer not to return the printer as defective because it seems to be a good all-rounder and it works for 2 other PCs in the House, its just mine which does not connect! Sad...

  I'll try the USB installation and then removing the USB-> wireless to see if that can help. I had previously seen articles where people offer to buy a router to 3rd party like that is basically a wifi pass through broadcaster. It is not for me thanks

  Thank you all for reading at least, it's now corrected with slightly reduced functionality.

  Install the USB printer, then DO NOT convert into wireless via HP drivers/installation.

  Change the USB to a TCP/IP port port newly created under the control panel of the printer (windows 7), enter the IP manually to the printer - you want an IP address that will change not in order to make this work - forcing the Home Hub to never provide that the same IP unique to this particular device was the easiest way for me. This connected but showed as offline printer constantly, others may have different experiences.

  To fix that (for me): -.

  Installing the printer in Control Panel Goto, force reinstall drivers HP ("via the drive"). Make sure that all the old files are overwritten. Turn the printer and then turn on (power button - twice if in mode "standby" to disable). Wait until the wireless light will stop flashing and become solid blue. Check in Control Panel if the status is online, if so you are good to go

  As a result of this sabotage, you lose the feature advanced scan for PC etc etc, but the real impression seems to be absolutely perfect. The printer is always available to everyone on the network, etc.

  Good luck to all.

  Alex

• DeskJet 4280 all in one can not install on Windows 7, PLEASE PLEASE HELP!

  I'm about to lose ~ for real!

  I just bought a HP Pavilion s5710f PC and my old printer - HP DeskJet 4280 all in one will not be installed!

  Seriously my end mind - I am a student unemployed and can't afford to buy a new printer.  Is it possible that I can install this printer on my new computer?  It must be because it is a HP product and if not, I'm in trouble!

  Please if someone can help me as soon as possible ~ so I would be very happy!

  Thanks in advance for your prompt attention to my more desperate question ~ Whitney

  Hello.

  You have downloaded the Windows 7 drivers for your printer? I suggest you download it and run it so that your printer works correctly on your PC. Make sure that the USB cable from the printer is disconnected before beginning installation. Click on the link below to download the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-74858-1&LC=en&DLC=en&cc=us&OS=4062&product=3390949&sw_lang=

• Install Apps on HP Deskjet 3050 all-in-one a - J611h.

  Purchased a HP deskjet 3050 all-in-one a - j611h; tried to add applications, but they do not appear to manage my Apps.  When I click on 'Add to the printer', he says "added to the printer", but when I then go to 'Manage my Apps', there is nothing there! What to do next?

  Hello pisces3703,

  First of all, let me tell you that I'm sorry that you are experiancing this problem today.  It seems that you printer does not support printing applications.  Here is a link to the place where I foud this information: http://support.hp.com/us-en/document/c03722645. I hope you find this information useful.

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• DeskJet 1510 All - In - One Series: I'm trying to connect my HP Deskjet 1510 all-in-one series to my ThinkPad Chromebook

  I tried to connect my HP Deskjet 1510 all-in-one series to my ThinkPad Chromebook, but I've been so failed to do. I don't know if I need to install an application or something on my Chromebook to make it work. I was also wondering how to determine the IP address of my printer. Help, please! Thank you.

  Hello

  The HP Deskjet 1510 is one USB printer, you can find its specificaitons below:

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5157552/document/c03775352/

  Such a can only be used on a Chromebook as a conventional printer, which means it must be directly connected to a PC or a Mac and registered with Google Cloud Print:

  http://support.HP.com/us-en/document/c04122530

  Kind regards

  Shlomi

• DeskJet 1050 All - in - One J410: update to W - 10. Can'f find the printer CD. All of this. Help, please.

  After the upgrade of Windows 10, I need to set up my HP printer so work functions.  I've looked everywhere but can't find my CD for my Deskjet 1050 all-in-One J410 series printer.  I have everything, including my FedEx slip sent to me with my current address.  I have the serial and FPU n # also and will give this info if necessary.  I just want my printer works properly.  Is there anyway that I can do it without my CD?  To use an old term of chess, I'm just a 'wood' push, but you people are masters and experts, so can someone there help me, please?

  Hello

  Kindly click on the following link to install the driver.

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-1050-all-in-one-printer-series---J410/4027462/model/4027464#Z7_3054ICK0KGTE30AQO5O3KA30R1

  I work for HP.

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".

• DeskJet 2542 all-in-one: parse error message prints well

  I kept getting this error trying to scan a document for the first time.

  "An error occurred all in communicating with the device. Please check that the device is correctly connected and powered. »

  To make sure that the printer is connected I printed a pdf on file on the computer and managed.

  I installed from the given CD and I intalled software on the HP site that grew to my specific operating system OS X 10.9.  I checked my firewall and allowed him to be opened for printer sharing.  I restarted my modem wifi network, I restarted the computer, and I restarted the printer.  I have reset my printers and reselected this printer... which is the only printer that was available for selection.  The computer recognizes the printer completely, however it just keeps giving me the message quoted above for scanning.

  Help, please.

  Hello @Elochin and welcome to the Forums of HP!

  I understand that you are having problems of scanning.  I would like to help!

  You have problems, make a copy?

  I have a few steps, I recommend you:

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet 2540-All - in - One Printer full feature software and drivers series.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How can I download my HP Deskjet 2050 All in One series J510 on my netbook without disc

  Is it possible to download my HP Deskjet 2050 All in One J510 printer on my netbook without disk? I really need to print things because my main computer's in the shop. Any help would be greatly appreciated. Thank you. Sincerely, Lisa Horsmon

  Hello

  the software to install your printer can be downloaded here...

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?CC=UK&DLC=en&LC=en&tool=&query=DeskJet+2050

  .. you will need to select model 510, 510 or 510g depending on what model you have.

  Tricky

• HP Deskjet 1050 all-in-one: cannot parse with the new 1050

  I've been scanning with Adobe Acrobat 8 Professional and a Lexmark printer all-in-one.

  Printhead from the printer become blocked, and fixing was too expensive, so I bought this HP printer. Installed and it is lacking. It prints and copies fine.

  When I tried to scan, Acrobat knew HP was there and he tried the Lexmark. When I plugged on the Lexmark, he systematically planted everything I tried.

  The only change is the new printer. Somehow its installation has made it impossible for me to analyze each device.

  I'm at my wit's end. Help, please.

  Thank you

  Bob

  Hi Bob,

  Acrobat Professional 8 are supported Twain compatible devices, while the HP printer do not support Apple ICA applications.

  As a reference, you can find the following Adobe article:

  Acrobat has ICA support on MAC 10.7 for now with Acrobat XI only
  

  https://helpx.Adobe.com/Acrobat/KB/Troubleshoot-scanning-problems-Acrobat-8.html

  You can scan using Capture of Image or the HP scanning application, then open / import the digitized in Adobe.

  You can find specifications listed below, sweeping an available Twain compatible software interface only for Windows:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c02063036/

  You can find measures to scan with your printer in the following link:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03548786/

  Kind regards

  Shlomi