Install a new printer

Similar Questions

• I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  Hello

  1. what happens when you use a wired connection?

  2. how many devices are connected to the router?

  This can happen if you connect that a specific number of device to the router, and when it exceeds the limit. You can consult the router's manual or contact the manufacturer of the router to check if all the parameters must be changed to connect several devices.

   

  Hope this information is useful.

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• Print Spooler service is not running and cannot install a new printer

  My print spooler service is not running and the computer will not let me install a new printer. How can I fix it?

  Hi John,.

  What is the number and the model of your printer?

  You can try running the fixit of the printer and check.

  Diagnose and automatically fix problems printing and printer

  You can also consult the following articles and check.

  Printer in Windows problems

  Resources for the resolution of the printer in Windows XP problems

• After installing a new printer how to print a test page Windows 7?

  After installing a new printer for the operating system Windows 7, right click on the printer icon then properties, there is no choice of test page printed as XP.

  See the instructions that came with the printer. It might actually be a button on the printer.

• I am trying to install a new printer. I get an error code 80072EFD of # when I try to download the software. How can I fix it?

  I am trying to install a new printer.  I get an error code 80072EFD of # when I try to download the software.  How can I fix it?

  See if this article is of no help:

  "You may experience some temporary connection errors when you use Windows Update or Microsoft Update to install updates"
    <>http://support.Microsoft.com/kb/836941 >

  HTH,
  JW

• My drives E and F have suddenly disappeared. I can't play my CD to install my new printer

  I searched with almost all programs which said it corrects your drivers, but they do not fix readers for the CD-DVD-R-W. These 2 drives have suddenly stopped working. I can't install my new printer... I have HP which is the computer that I and WindowsXP and still have no results.

  Hi PollyHarris,

  1. did you of recent changes on the computer?

  2. you have any third-party DVD burning software installed on the computer?

  3. you receive an error message when you insert a DVD in the player?

  See the link below and run them the fixit tool available, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  If the previous step fails, then check in Device Manager for the status of the disk on the computer and after return details.

  How to solve the problems of hardware with Device Manager

  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

• trying to install a new printer kodak esp 3.2, error 643

  Original title: error 643.

  trying to install a new printer kodak esp 3.2

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  You can place the computer in a clean boot and installation of the printer driver.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important:-do not forget to put the computer to a normal startup by following step 7 in the link above.

  You can also read the following article to download Kodak printer drivers.

  Kodak printer drivers

• Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  It may be an option, as long as the error prevents you to connect to the machine. Even so, some firmware update software will not allow a downgrade. This is something that you should go to the manufacturer of the printer for more information.

• OfficeJet 4500 said Offin printer after I installed the new print cartridge

  Don't use Windows 7 but no window 8.   Just installed a new print cartridge and now it says the printer is offline.

  Glad to hear everything is working very well for you. If you encounter other problems, feel free to ask.

• trying to install my new printer wireless, keep saying window installation service could not be accessed.

  trying to install my new printer wireless, keep saying

  Window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.contact your support for assistance staff.
  I'm not running in safe mode...

  Thank you so much, I used the fix it guy and it fixes the problem, I was able to install the printer wireless without problem...

• Peripheral USB not recognized then try to install a new printer

  can help me to answer why the message by message "unrecognized USB device" displays when I try to connect a usb cable, when I was trying installs a new printer?

  Hello

  Usually extended as printer USB devices should be delivered with an installation CD or drivers. You should check if you have this CD, and then install the necessary software.
  In addition, you can also disable the safe option of feeding in the USB root hub properties.

• HP OfficeJet 8610: Install a new printer to replace an old HP printer

  I don't know what software to remove it from my computer.

  I am replacing an OfficeJet 7310 with an OfficeJet 8610.

  I installed the printer, then ran the tool on the site to make sure that it was installed correctly.

  I can't access my printer features as Solutions Center will not update. Looking for the old OfficeJet 7310.

  Here are the messages:

  Use the tool, you said. Yes, I did. Everything is installed correctly, here is the message: the current full HP software is already installed and drivers seem to be installed correctly. To check the functionality completely, click on the Test button below.
  
  Then I click on the HP Solution Center program.
  HP solutions Center can not run because your device installation is not complete.
  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.
  If it does not complete the installation or if you do not have the CD, access the HP help files, blah blah blah

  Hello

  The HP Solution Center program is affiliated with your old printer, it have nothing to do with the most recent 8610 printer.

  I would say running the 7310 below installation selecting uninstall, which will remove all the components of your old printer such as the driver of the printer, the HP, the features of HP digital imaging solution center to avoid such confusion:

  http://ftp.HP.com/pub/softlib/software11/COL30951/MP-76831-1/AIO_CDB_Net_Full_Win_WW_130_141.exe

  The software for your new printer (HP Priner Assistant) can be started by clicking on the HP Officejet Pro 8610 icon from your desktop or from the startup of the printer folder.

  Respect,

  Shlomi

• Office Jet N911a 8600 Proj... HP Officejet Pro 8600.exe guard eager to install a new printer

  I just got an Officejet Pro 8600 N911a and installed out of the box with no problems... it prints, copies and scans wonderfully.

  I just downloaded this package "complete" on HP.com and that seems to work as well.  He put an icon on my desktop and programs (I use Windows 7 64-bit) which is a shortcut that points to this "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage start

  The first time I used this, he showed me a page of control with options to check the ink levels, connectsion etc.  Then I rebooted, and now if I click on the icon, I get the message of Windows asking me if its ok for the program change windows (as if its about to install something) and then shows me a box that wants to connect a new printer or change the wireless settings.  I tried to run the program from the command prompt with and without the "-Start UDCDevicePage ' qualifier and it gives me the same thing.  ... Always the same restart.

  the printer works fine... just this irritating program.  any thoughts?

  Something was damaged during the restart. You need to just uninstall and reinstall the software and the drivers again.

• where can I find my SSID to install a new printer wireless?

  I am trying to install a printer wireless to my desktop computer.  I have already installed and running with my HP laptop. I used a connection wired eithernet and it asks me for my SSID # to install the printer.  The program is installed, but it will not be printed. I'll try again, but he'll still want my SSID im sure.
  Jewellee

  Hello

  ·         What operating system is installed on the computer?

  I suggest you to use the same SSID that you use to connect to your router and then try to install the wireless printer and check if that helps.

  You can consult the manual of the router or the properties of the network adapter for the SSID.

  See the following link for more information.

  http://WWW8.HP.com/us/en/support-topics/printer-installation/wireless-printer-troubleshooting.html?JumpID=reg_R1002_USEN