Install AOL edition of Firefox makes Firefox the browser internal used by AOL instead of IE or it is just a stand alone custom Firefox version?

Similar Questions

• I have a subscription Adobe CC and then Adobe CS6 with a separate license. In addition, I also have a separate license for the stand-alone Adobe Lightroom version.  These were installed on separate computers, however no opf the versio of stand alone

  I have a subscription Adobe CC and then Adobe CS6 with a separate license. In addition, I also have a separate license for the stand-alone Adobe Lightroom version.  These were installed on separate computers, however no opf the stand-alone version will work now that I get a box for Creative cloud telling me that I have the software on two computers and I have to disconnect from the other computer.  How can I fix so that I mustn't keep disconnection in order to work on my laptop, etc. ? I have a subscription to the program and three separate license for each other. When he told me to update the program he changed everything to CC, which I did not intend to do.

  HI ProfWSA,

  I see that you have a subscription active creative cloud.

  I beg you sure you want to contact adobe help support:

  Contact the customer service

• Given the challenges install Digital Editions 2.0 and have the program initialize correctly.

  I need to install Adobe Digital Editions (ADE) 2.0 so I can download books for Nook my daughter of our municipal library.

  I tried to install 2.0 ADE much too often absolutely nothing works.  After downloading the 2.0 installer ADE, I tried installing with software of Norton antivirus and firewall disabled, enabled, try to restart my computer after a ADE 2.0 installed with protection against viruses and the and every time I tried to do anything with the 2.0 ADE supposed to be installed, it crashes and Microsoft opens its window mail error because ADE 2.0 has encountered a problem.

  On one or two occasions I also received this error message:

  Digital Editions.exe - error of installation at '0x8514c483' referenced memory at '0x8514c483 '.  The memory could not be "read".  Click 'ok' to complete the program.

  I also re-downloaded the Setup program several times under different anti virus software for operating scenarios (software enabled, etc.) and each time after the installation is complete, the program crashes.  Whenever an installation attempt failed, I uninstalled the program and went through a complete installation of ADE 2.0.  Sometimes even using the same install program and also after re - download the 2.0 ADE install program.  Everything I tried failed.

  I'm also using an old Windows XP PC, but despite being a relatively old computer, this challenge of installation and initialization should not happen.

  Short of finding a copy of version 1.7 of the ADE and see if it will work (has been suggested by sjgt user when replying to a post by su-share on 26 Dec at 0358), does anyone have any suggestions?  This shouldn't be such a challenge.  THX

  I have just run into a similar problem with new Nook HD my mother for her books, she retired through the library. However, we found that B & N has available through their site for free applications for libraries using Overdrive Media Software Console and libraries who use the library of cloud M 3. All you have to do is download these free applications to be able to download directly from your library website in your corner.

  OverDrive Media Console: http://www.barnesandnoble.com/w/overdrive-media-console-overdrive-inc/1113021293

  3 M Cloud Library: http://www.barnesandnoble.com/w/3m-cloud-library-3m-company/1113021300

  Once you have downloaded the correct application for your local library, you can access the app with all of your other applications. Within the app, it's self is where you can find books from your library. My mother was so excited to know we could do this. She is good with a computer, but it takes some time to learn how to do the transfers of file/drag & drop, for a direct download or available is a very big relief of his not having only not learning something new and complicated.

  I hope that this help & wishes you and your family.

• Allowing external editing Adobe Business Catalyst in the browser

  Muse works to enable editing in the browser outside hosting Adobe Business Catalyst ?

  Hello

  Update June 2014 to Muse allows In-Browser editing for Muse sites hosted with third-party providers (not Adobe).

  See https://helpx.adobe.com/muse/using/whats-new.html#In-browser%20Editing%20enhancements for more details.

  Abhishek

• How can I make an image tile length of the browser without using it as a background image?

  I understand that if you use the rectangle tool and stretch it to the edge of the page, triggerring the red margin, the tile image is supposed to stretch the length of the browser. While this works for width, coating horizontally, for some reason, it doesn't work for the length, Tile vertically. When I saw my work in the browser, the tile image stretches with the footer that I scroll to the bottom of the page.

  When I use the image as the background fill and tile it, it works, but I need to use a different image for the background.

  Hello

  As you said you can either use your browser complete with fitting tile or design the background image browser outside the Muse using any image editor like Photoshop and then use as fill for browser that would include the two images that you want to use as a background image and you want to use as tile on the section of the page.

  Thank you

  Sanjit

• How can I get rid of locate the browser link using Outlook and Windows 7?

  I have Windows 7 and use Outlook 2003 and use them on multiple computers, but after wiping on my desktop computer and reinstall everything, now, whenever I hit a link on an email, I get a window asking locally, the browser link. Then it hangs for a long time. What can I do to fix this? Also, when trying to open the link, it remains in the background and I put Outlook in the taskbar to display the linked Web page

  It should apply as well to Windows 7. It is likely to be caused by the DDE for Firefox.

• My text Position moves according to the browser I use

  I'll have a bit of trouble getting my text remains put in different browsers. For the text on the buttons on my left, I've been putting text in an APdiv and Center the text on the button. It stays put in IE, but the APdiv moves to the top of the button (table cell) in Mozilla and downwards (table cell) button in Safari.
  
  I tried to use the CSS rule definition window to place the APdiv in an absolute position 'top' and I will still have the
  the same problem.
  
  I read the article on absolute positioning on Dreamweaver CS3 The Missing Manual but nothing I read really helped me and as I said, I already tried the absolute positioning.
  
  I'm new at this and the site that I'm getting is for my last class and I'm really trying to do things. I'm not good with basic coding, so, if your useful response includes code, please be very specific about the places where to place in it section of the code of the page.
  
  I have not yet added my site, but I have a picture of the homepage take my place. You can see here. The buttons are placed images flown in a table and the text I use in the APdiv in addition to this is not the text that appears on the buttons (had problems and decided to go simple with DWs fonts - used the set Geneva, Arial, Helvetica, without serif).
  
  I'm working on a PC running Windows XP Media ed. w / SP2 if that makes a difference. And I'm in DW CS3.
  
  Please help ASAP - the site is due Wednesday 12/12.
  
  Thanks in advance.

  Hello

  The reason is the following:

  
  

   

  
  

   

  
  

   

  
  

  You use

  Tags to control spacing in your layout.
  You have the table that contains your 3 spaced paragraphs of rollover images
  of the top table.
  The problem is the paragraphs have different default margins in different
  browsers. That's why you have the alignment problem.
  Normally, you would use CSS to give all the

  Tags the same margin to give
  lines of text the same spacing cross browser.
  However, which won't help here because users have different text sizes
  their browsers. Different text sizes: different line height.
  In text view browsers set to "big text" your table with images
  will be a lot of space between it and the upper table. In browsers with
  small text, the table will be so much near the top table.
  Meanwhile, your PA divs will remain in the same place on the page.
  The text will be only line upo worm images for people who have their
  text exactly the same value as your size.
  That's why you shouldn't use

  Tags to control the spacing between the objects when graphically the
  objects must be in a specific location in the layout.

  The solution is to get rid of the

  Tags and CSS to give the table use
  with the reversal of the pictures in a higher margin.

  First of all, get rid of the

  tags and give a CSS class to the table below them.
  Change this:

  
  

   

  
  

   

  
  

   

  
  

  To do this:
  

  
  
  Class = "leftnav" >

  Then, set the class in your CSS. You can add it to the end, just after
  you are a: active link style:

  Change this:

  a: active {}
  text-decoration: none;
  }
  -->
  

  To do this:

  a: active {}
  text-decoration: none;
  }
  {.leftnav}
  margin-top: 150px;
  }
  -->
  

  Adjust the desired margin to align the table with images with your
  Divs PA.

  I hope this has helped.

  Take care
  Tim

• How can I make iMessage on my MAC using my phone # instead of my e-mail address

  The habit of using my phone number of my iMessage on my MAC and it syncs with my phone and I could reply to all messages on the computer.  Now, since I updated my apple ID, it will use only my email address.  (The last time this happened, he went back, but I don't know how) How can I change using my phone #?

  You need to set up the continuity of linking your Mac and your iPhone for sharing messages - continuity of use to connect your iPhone, iPod touch and Mac - Apple Support

  BUT, the two devices must be connected to the same iCloud account using the same AppleID for connection.  You can not link devices using different AppleIDs.

• PDFs from web disappear (independent of the browser being used)

  Under XP with latest updates.

  If I download a PDF file or that you try to save a PDF file of the web, the browser (IE8 or Foxfire) sees the file but it does not display a viz Windows Explorer or a search can find it.  I have turned off all firewalls, antivirus etc and behave the same.

  Do not have this problem on a Vista machine I have.  I had to use it to save the files and then transfer them to my main machine, the XP machine. in question

  Thoughts, suggestions?

  Thank you.

  Deeppow,

  Thank you for visiting the Microsoft answers community.

  Can you tell me which program you use to read pdf files? Have you been able to read them before, and if so, the problem just start happening? Did you recently change?

  I can't wait to hear back on your part.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to download an add-on, it tells me that I have Firefox (when Firefox is the browser I use).

  I can no longer add additional modules. When I click on the download link, I get a little pop-up telling me that I can download the add-on, if I first download firefox. The thing is, I'm on firefox when this happens. I have already downloaded firefox again.

  This has happened

  Each time Firefox opened

  When I upgraded to the current firefox fersion

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.2.3) Gecko/20100401 NET_mmhpset (.NET CLR 3.5.30729)

  Your user agent is messed up

  1. in the address bar of Firefox, where you enter the address of web pages, navigate to Subject: config

  2. a warning "This might void your warranty" may appear. Click on "I'll be careful, I promise!

  3. in the text filter box, enter general.usergent

  4. for each of these preferences general.useragent, right click on them and click Reset.

  You should be prepared very well now.

• Cannot copy in the browser without using CNTR C

  When I use the copy and paste functionality with my mouse, I get an error messages saying I should use CNTR C since the security feature is not set to allow the direct copy; I want to just copy and paste using the mouse. I can adjust the parameters of security under IE, but I don't know where to adjust the settings in Firefox to allow a direct paste from the Clipboard.

  See:

  • http://KB.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
  • https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper

• Web site in the browser tab reads "untitled document" instead of the name of the Web site

  The tab for my Web site reads "untitled document"? This happens in Firefox, Safari and Explorer.

  In the case of Web sites, the Web site name here.

  Any ideas how I can fix this?

  Look in theyour page and find

  and to take

• Trying to save the file in pdf format and instead its projection upward as we just drop. Half of my files are beautiful and half are not. Why!

  I am trying to save a file in pdf format. It appears in my folder as a file. I have a little need to do so. Registration of the same file with different names. Some work and some aren't.

  All registration documents are called files. What determines its type is the file extension. If it goes to something else especially an extension that the file viewer does not recognize he can just say instead of his type of format file.

  First thing to try is to verify that pdf is the extension (the characters after the last period) if there is no or an extension that you recognize, rename the file, and add the .pdf at the end of the name.

  If the file is a true pdf file it will load now.

  If she does not then of two things is true. The file is corrupted sense that it must be recreated. Or the file belongs to another application that is more installed on your computer.

  Once Finally, scenario, the extension is correct and does not rename but still it says file instead of pdf.

  In this case, like acrobat or Adobe reader software was uninstalled and deleted the associated file.

  Even if the association can manually be fixed which is totally dependent on having a Mac or Windows computer, and you have not mentioned it or I forgot. You can just reinstall the program that you want the associated file. The installer will fix it for you.

  On Windows computers, the file extension may be hidden. If you have a Windows system and don't know how to change extensions to the visible, let us know. I don't know if the Mac have a similar feature.

• IMessage will use the telephone number; use a colurriel instead

  I had no service iphone since February, so I only use imessage on wifi. Today, however, he ceased to imessages send my phone number, and I don't know what to do. I tried to turn on and off imessage but it said activation pending and send & receive there is a circle of loading of my phone number and number highlighted grey. I've never had this happen before that I am at a loss

  UH I have never asked a question here but: iPhone 5. 64G, about 38 available; I don't know what everything is on my phone :-/

  beachpickle wrote:

  I got no service iphone since February

  This is perhaps the reason for your question?  You use an iPhone that has no telephone service?  So you have no cellular carrier currently associated with the iPhone?  Yet, you want to use this phone number non-functional as the mechanism for your iMessages?

• What port bulk charge and reset the field data, using SSL?  Are there more ports beyond 7002 just?

  Hi, we have short components configuration problems in an implementation of SSL Linux 64.  The rest of the components work, but not the load mass and reset the data domain.  We believe that this could be a problem to port because the environment is locked by defalut.  7003-8000 ports will not be open by default.

  On the side of the design, we have the arguments defined VM as below, which appear correct.

  Djavax.net.ssl.keyStore=/disk1/Oracle/Middleware/user_projects/domains/endeca_integrator_service_domain/security/ssh/endecaServerClientCert.ks-Djavax.net.ssl.keyStorePassword=***-Djavax.net.ssl.trustStore=/disk1/Oracle/Middleware/user_projects/domains/endeca_integrator_service_domain/security/ssh/endecaServerTrustStore.ks-Djavax.net.ssl.trustStorePassword=***

  any thoughts?

  You can configure the port ranges that short Server will use.  This applies to both ports of the primary for web services (usually 7001/7002 for Non-SSL/SSL) as well as the underlying ports that are listening on the areas of individual data.

  Almost everything is going through the ports of short primary server (7001/7002) to lock things should not be a problem, as the "traffic" would come from the local computer.  That said, by exploiting the essential ingest functionality requires a direct contact between Integrator (or Integrator Server) connection and the data domain.  If the ports are not open and inclusive tent ingestion of a different area, you'll get failures.

  As with anything related to SSL, I recommend always get your sorted environment (open ports, firewall, etc.), then activation of SSL.  If you are not sure about ports AND you are not entirely sure of the configuration of SSL, it can be very difficult to solve the two simulanteously.

  Patrick Rafferty

  Branchbird