Install driver

Similar Questions

• Cannot install driver WIFI on my Satellite Pro DR L850-1

  Hi guys,.

  I installed windows 7 64 bit on my Toshiba Satellite Pro DR L850-1 by making the new partition which formats the hard drive.

  After installation I was expecting windows 7 will find the drivers from internet or if not I'll download them from Toshiba Web site.

  I downloaded and installed all the drivers from the LAN and WLAN drivers first.
  All the other drivers installed perfectly and their respective hardware works fine, but the WLAN Atheros driver that does not install the Setup program does not start and I tried all means known to me or I can find on the internet to install it.

  Any help will be much appreciated.
  Thank you.

  Generally after a clean OS install, you should start with the chipset driver, display driver, driver sound and so on.
  Have you installed driver chipset before you tried to install the WLAN driver?

  By the way: you try to install this driver from the Toshiba download page?

• Satellite M70: How install driver ATI graphics card

  Hello!

  I want to install the graphics card ati form homepage, which means the newest releases drivers :)
  I downloaded the driver from ati.com (catalyst), that this driver is specially designed for NOTEBOOK computers!

  I can't install driver, Setup writes that I have to contact toshiba.
  What can I do to install the ati drivers?
  Please help me if you can!

  Oxford
  Michi

  Hi Michi

  Nothing to do!
  I checked the site Web of ATI. I chose the notebooks with ATI graphics card and checked which laptop manufacturers are supported.
  and... Is there any Toshiba laptop.

  It is not advisable to install the other drivers for graphics cards. You should always use own graphics driver Toshiba because it is a little bit different. Graphics drivers of Toshiba supports an overheating protection to control performance and temperature.
  The laptop card is a module of own cooling as the desktop PC.
  If the temperature rises to the critical level driver degrades performance.

  Now you know why you must use the drivers from Toshiba. However, I read that it is possible to install the omega drivers.
  But if you install the drivers and use so you can do it at your own risk!

• Satellite A300 - 10 M: how install driver WLAN

  I downloaded the Atheros WLAN driver but do not know what are the files to be opened to load the driver on the laptop.

  Any help, please?

  Thank you

  Hello

  I guess you ini files and the dll in the folder of the Wlan driver
  In your case, I would go to the Device Manager. Here, you must mark the card Wlan (unknown device or Ethernet card in the network controllers) and must use the option install driver. Use the advanced procedure, and then point to the folder of the Wlan driver that you downloaded on the page.

  Welcome them

• Re: How to install driver for SM Bus controller?

  I have the yellow warning against the Sm Bus controller triangle in Device Manager when I try to update the driver it is not found can help you. I did a search on the forum for SM bus controller nothing helps.

  See you soon
  Blanketstacker

  If you want to discuss these problems you must provide some basic information like the model of laptop and operating system preinstalled, so we can check the Toshiba download page and see which driver is available here.

  Furthermore, have you installed driver right chipset for your machine and your preinstalled operating system?

• I can not install driver wireless on my Tecra A8

  I can't install driver on my Tecra A8 pta83E wireless.
  I downloaded intel and Atheros driver for XP, but it does' work.

  Help, please...

  It may not be possible. Why, you try to install the WLAN drivers? Your laptop not preinstalled with comes recovery media? Recovery image contains all the necessary drivers.

  Please check sticker Wi - Fi in the lower corner and we send the part number of WLAN card. If we can identify the one that is built into your laptop. What operating system you are using?

  Hey can man you please after more than two sentences. Who knows what you're trying to do and what the problem is here.

• Can I install Driver Visa and USB-GPIB on LabVIEW7?

  Can I install Driver-NI-VISA and USB-GPIB on LabVIEW7? Or I need to install LabVIEW8?

  Thank you

  Véronique.

  Veronica wrote:

  Can I install Driver-NI-VISA and USB-GPIB on LabVIEW7?

  Yes.

  Or I need to install LabVIEW8?

  Only if you want to program in LabVIEW.

• Cannot install driver update.__Graphics need something. He tells me that there is a solution.

  I have two problems. The first is, I can not install the patch (KB973636) I get an error code 646.
  Then when I look into the solutions of a problem my graphics device disk has stopped.  I check the updates and it indicates that the driver is up-to-date.
  I'm relatively new to the computer, so I do not understand all the terms.

  Hello

  You have Works 8 installed on your computer? If this is the control panel - Windows Updates - right-click on
  It CACHE - sometimes updates will offer an update, that you don't need.

  If you work 8 go here and put the KBxxxxxx number to download.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  ----------------------------------------------

  To the problem of display driver (video), update your video driver manually using these methods - you can also update
  others as needed.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I recently installed Driver Detective hangs up.

  I recently installed Driver Detective.  I did a scan and the scan hangs when it tries to update my printer HP 2100 driver.  I don't have this printer.  How can I get rid of this driver for my Driver Detective will no longer hang up?

  Hello

  You receive an error message?

  Check if the printer is listed in the printers and faxes.

  a. click on start.

  b. click Control Panel and select Printers and faxes.

  c. If the printer does not appear, do a right-click and delete the printer.

  It can also get recommended drivers for your hardware through Windows Update.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  http://support.Microsoft.com/kb/323166

• Windows needs to install driver software for your DCC

  I installed the double mod. Windows Vista Ultimate & windows 8.1. When I started to pass on my laptop running windows Vista, it takes 5 minutes to open a session and message displays Windows needs to install driver software for your model of control abstract CDC (ACM)

  I don't understand how I can solve this problem.

  Thank you

  Try this link.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20driver%20SOFTWARE%20CDC%20abstract%20control%20model%20$ $ACM & ac = 5 #refinementChanges = & pageNumber = 1 & showMore = false

  In addition, with some PCs, you can select boot options, with dell, the F12 key to start the pc. Also, try this link for dual

  Starting the OS.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20pc%20startup&AC=6#refinementChanges=60&PageNumber=1&showMore=false

• "Windows needs to install driver software for your Internet access server.

  Hello everyone, since April 3, 2010 I get this message just after I turn on the computer and Vista SP2 is ready to ROCK, I change my router in 31 March, for a Lynksis E1000 and it works perfectly since then.

  Now, in the cry of the message I have different options from the tree, if I click in the star of windows option "locate and install driver software (recommended)" the search for drivers to install, but then another small window appears asking me to insert the CD that came with my Internet access server (it shows as another option that says "I have not a disc. Show me other options') and there is when I stop because I fear :)

  What is c? WHAT is an Internet access server?

  My ISP is Comcast, I don't know if it's important.

  Can someone help me? THANKS :)

  Easy problem to solve, go in right Device Manager click on internet access server select Update driver they are looking on the web for the driver. It may take up to 5-10 minutes. The Device Manager will change other devices forInfrastructure. network devices / Microsoft Wireless Router Module.

  Terry

• LaserJet p1102w: HP Smart Install Drive

  Hello

  I have a HP LaserJet p1102w connected to my PC via USB. It works very well and is shared on the network. One thing that is weird is the presence of a virtual CD drive (H:\), titled "HP Smart Install. It's there whenever I start my computer, even if I eject it or take it apart. My question is "why is the disc it? ' and ' how can I get rid of him? Normally, I don't care, but I think that his presence begins to interfere with operation of my real CD/DVD-ROM. The drive does not open and is not available for virtual machines on my computer because they are mounted.

  Thank you

  Jason

  Hey Jason,

  The HP Smart Install drive is a virtual drive, containing the installation of the printer driver.

  You can disable the feature by using the HP Smart Install Utility below.

  Follow the steps by selecting your printer and click on the printer button, then turn the feature off and confirm:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-129224-1&cc=us&DLC=en&LC=en&OS=4158&product=4110396&sw_lang=

  Kind regards

  Shlomi

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• I do not have CD instalation driver for Panasonic NV-GS1B; HOW CAN I BUY IT?

  I don't have CD instalation driver for digital camcorder Panasonic NV-GS1B; HOW CAN I BUY IT OR DOWNLOAD?

  Hello

  You can contact Panasonic for help.

  Here is the link:

  http://shop.Panasonic.com/search/?support=y&q=Panasonic%20nv-gs1b

  I hope that helps!

  Any questions about Windows always post on the Community Forums of Microsoft.

• Cannot install driver under windows 7 compatible with the epson stylus RX685 printer

  I can not install driver to support the epson stylus photo RX685 printer connection to my computer.

  Be sure to only install the driver before connecting the printer.

  After installing the driver, restart the computer, and then reconnect the printer.

• Windows needs to install driver software for your ethernet controller

  Hello

  IM using HP G7000 notebook OS vista and when I turned it on: windows needs to install driver software for your ethernet controller. This driver will install?

  Download and install driver Atheros ofhis