LaserJet p1102w: HP Smart Install Drive

Similar Questions

• LaserJet P1102w, why not install it via the USB port on a second system to dual boot Windows XP/Windows XP?

  A seriously paralyzed malware on my laptop Dell Inspiron 1318 running Windows XP Professional SP3 with 3 GB of memory. Some key files have been deleted, and I can't open all .lnk files. After some research, my solution was to start from a clean format. However, I have some programs on the old system that I really need and impossible to reinstall on a new system. So, I chose to install a new WinXP as a dual boot on a separate partition (I have also a third partition that I use for user files); keep the old system for when I really need.

  After installing the new WinXP, the detector material caused my LaserJet P1102W printer install pop up box. I was busy to install other drivers at the time so I canceled the installation of the printer later. When I came back to him, he went for the bulk of the fine saves but then abruptly stopped, saying: "the printer installation failed. On the HP site, I went through all the HP printer Diagnostics steps without good results.

  I really want to get this printer working on my new system. What can I do?

  No problem. Since you are the author of the post, you should see a black button with "Accept as Solution" next to the reply button. If you don't see it, make sure that you are connected and try again. If still can't get it, you can click the link inappropriate content report and ask the moderators to mark the solution for you. Hope that helps.

• How to: Use Smart install wireless install your Laserjet on Windows 7

  Some HP Laserjet printers have Smart Install. This allows you quickly connect the printer USB cable and start the installation. In this way a CD or a CD player is not necessary to install your device. Once the installation program appears you can proceed through the installation. The following video demonstrates how to use Smart Install to install your laserjet on a wireless network.

  Smart Install of Windows 7 - HP LaserJet P1102w wireless

  I hope that the information and the video above helps. If anyone has a problem or has any questions, feel free to ask. I'm more than happy to help.

• How to reinstall LaserJet P1102w USB wireless?

  I use Windows XP and have a LaserJet P1102w, who was installed with a USB connection.  I have a wireless connection.  What I need to first uninstall the USB and then reinstall wireless using the installation disc?  If this isn't the case, reinstallation replaces the USB key, or make options USB / wireless?

  Download the user guide here...

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=4110396

  and follow the instructions on how to configure your network.

• HP LaserJet P1102w: Cannot install the driver or the printer

  I had this problem on my old PC as well.

  I plugged my printer via the USB port (a port I don't know for sure works) and nothing pops up to auto install or whatever it is. I thoguth that was weird, but I also thought that the pilot would be on the printer, so let's just go to the section of the Control Panel printer. I did it, and the printer is there, but he says that he has no driver. I tried the option to find driver, but that did not work.

  I thought maybe I just need to download it then. Came on the HP site, downloaded the installer for my printer and started running it. He gets to the part where I need my printer and plug it into the USB port. I did, but it will not register in the installation software I did. The USB port works, as I have the ability to eject the printer in the taskbar, but I can not install anything.

  Hello @Kitanya,

  Welcome to the Forums of HP Support!
  
  I understand that you encounter USB connectivity problems during the installation of your HP LaserJet Pro P1102w printer on your computer Windows 8.1. I would like to help you to solve this problem today. Now I see you tried first to install your HP Laserjet Printer simply by plugging the USB cable in order to run the HP Smart Install process. HP Smart Install is the installation program built into your printers of programming. By plugging the USB cable, if own you a CD player on your computer, the printer is supposed to be recognized as a software CD and an installation must be started. However, is there is no problem with the CD drive on the computer or the printer is blocked to be recognized correctly it can cause the HP Smart Install feature does not work correctly. That being said, when you tried to run the installation with the downloaded driver package and were prompted to plug in the USB cable, then because the printer has already been connected "prematurely" with the USB cable already recognized computer connection. Therefore, the computer won't recognize the P1102w related 'recently' if he thinks already that is.

  With that all being said, I will guide you in the faster and easier way to solve this problem. Please follow the steps below.

  Step 1: Uninstall the drivers:

  Even if the installation has not completed successfully a part of the software and drivers can have made their way onto your computer. It is important that we have a nice clean slate to work with, so please follow the steps to remove all traces of your computer printer.

  1. Unplug your USB cable from your printer HP Laserjet, as well as your computer
  2. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  3. In the start screen, type programs and features. Click on programs and features to run
  4. Scroll through the list of population programmes and to locate the HP Laserjet.
  5. Click the HP Laserjet Printer and select uninstall
  6. Follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder, once it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Allow the download to run
  4. Follow the steps on the screen to reinstall your printer
  5. Do not plug in your USB cable until the installation screen invites you to.

  Once the installation is complete, please test printing.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP laserjet p1102w driver

  I tried to download the 64-bit for the HP LaserJet P1102W printer windows 7driver for a few days, but the HP download site always tells me that the file is not found.

  I need this driver and my computer has no optical drive, so I need to download it. Help, please.

  Thank you.

  -Scott

  Hello

  In this case it may be an alternative, find the ip address of the printer and type it in your browser. You should have the printer's built-in web server. on this page there should be a 'smart install' tab click on it and on the next page, select Download. The driver will be downloaded from the printer itself. Of the itselfd of the printer, you say? Yes, the printer, these printers have a feature smart install, which means that there are a small amount of memory in the printer that contains the printer driver.

• HP Laserjet pro P1102: problem installing printer driver

  Dear Consultant,
  I just installed my printer during the first time and used firmly for a few days... Today I installed windows 8.1 in my pc for some reason.

  But the problem is that when I install my printer driver, it gets installed forever. I tried several times but each time I wait at least 3/4 hours and it ends.

  HP Smart install feature is not displayed. So dear pls give me a solution, I need... Thank you in advance.

  Hi @Alid,

  Welcome to the HP Forums!

  I noticed that you cannot install your range of printers HP Laserjet p1102w on Windows 8.1, and I'm happy to help you!

  How is the printer connected? Wireless, or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope hear from you soon!

• LaserJet P1102: Driver for LaserJet P1102w

  Need help for my LaserJet P1102w operate with Windows 10.

  Best regards / Tomas

  Hello

  Kindly click on the following link to install the printer driver for the printer.

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-P1102-Printer-series/4110394/model/4110306#Z7_3054ICK0KGTE30AQO5O3KA30R1

  I work for HP.

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".

• HP LaserJet P1102w: Help with printer install

  HP LaserJet P1102w chip installed on the new windows 7 PC as a USB device when I am logged in it.   How do I make a printer so I can set as the default printer?  On the control panel / devices and printers, she appears as a device, not a printer.

  Solved the problem.  Re-directed HP smart install and the drivers have been loaded.

• Problems installing HP LaserJet P1102w

  Hi all!

  Can anyone help me please with this problem. I bought this printer HP laserjet P1102W is approximately 4 months. It was working fine until my service provider has changed the settings to my Lynksis modem + router. So I reset the settings for my modem and if it was configured (wireless). The modem worked fine, but he could not connect with my laser printer so I uninstalled it and it was reinstalled.

  Here's the problem:

  When installing using smart installation embedded in hardware (no CD), this password box continues to appear. Maybe I had entered a password for my printer before. Problem is that I have completely forgotten in this respect. This password thing is I can't install my printer properly. If I install it using configuration USB it works by USB not wireless. But I bought it for its wireless capability in the first place that's why I wanted that it functions as a wireless printer.

  Can someone help me please. How can I recover this password? Or better yet, if there is a way for an password is not needed?

  Thank you for your help.

  You can also join by my email: {deleted personal information}

  Primus

  ATLAST my problem is solved! I refer to the manual of the user for connection problems. I had to download the manual of a Wordpress blog. I wonder why he didn't come with the box as a paper or CD version. Anyway, problem solved!

  Wheeewww!

  -primus

• HP Laserjet P1102w: HP Laserjet P1102w not recognized in Windows 8.0; driver needed

  Trying to install HP Laserjet P1102w on Dell desktop running Windows 8.0. The installer always stops and says to connect the printer by USB, but it is already connected and turned on. Had to remove peripheral devices after he worked temporarily, but now I can't find the driver - have the disc. How to recognize the driver on disk file?

  Hi @artjourneyer,

  I see that you have problems get printer recognised and you will need to find the file on the CD for the printer. I will definitely do my best to help you.

  The file would be .inf from the CD.

  I would say to download and use the latest drivers for Windows 8. HP LaserJet Full Feature software and driver.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. You may need to try another USB cable.

  Try and print a self-test on the printer hardware to see if it is a hardware problem. If the printer is not in a ready state, the computer does not recognize it. Printing a Configuration Page. Select the method two.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect. Remove the USB cable plugged in, remove the printer from the Device Manager.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  You set up the printer on the wireless network?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• LaserJet P1102w: Download driver for LaserJet P1102w for Windows 8, which will be used to the other computer

  Could you give me a link to download this driver. The PC connected to the printer is offline, then I need to download the driver using a Mac OS X 10.11 El Capitan. Thank you

  Hi @Macaronii,

  Welcome to the Forums of HP Support!

  I see that you are looking for the software and drivers for your LaserJet P1102w printer range. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like you need drivers for Windows and Mac OS.

  For Windows 8:

  • Click here to download HP LaserJet full feature and Driver for Windows 8.

  HP has no software and drivers for this printer in Mac OS X 10.11 El Capitan. Although the Apple update utility has a print driver for the LaserJet P1100 Series that should work.

  For Mac OS X 10.11:

  To install the Apple update driver. Follow these instructions:

  • HP printers - installing a printer driver Mac using Apple Software Update

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Laserjet P1102W - cannot install on Windows 7 64 bit

  Hello

  I'm unable to install the software for my laserjet p1102w. I tried the install CD, USB install and install downloadable. I get the error message is below. I ran through almost every tutorial tech support on the HP Web site as well as a few websites of third 3rd, and I'm about to throw this printer out the window. A few things about my setup: the printer is already connected to the network by other computers (Vista, who had no problem with installation). I am running Windows 7 64-bit on an Acer Aspire 5745 G.

  

  Hi smcconn5,

  There are a few other things that we can try to get the printer completely installed and operational.

  Unplug the USB cable.

  Uninstall the software from the CD.

  Go to start, computer, right click on the CD drive and select open, and then double-click on uninstall.

  Restart the computer.

  Then go back to start, computer, right click on the CD drive and select open, then right click on the installer and select run as administrator.

  I hope it will work.

  Another that you can try is to create a new user account with full Admin rights and try to reinstall the printer. How to create a new user account in Windows 7

  If you still have questions then I would contact Microsoft to see if they can help with this error to the administrator.

  Let me know how make you out.

• Disable HP Smart Install on HP Laserjet 200 M276

  I found that the SIUtility.exe is used for off the HP Smart Install on HP Laserjet Pro 1102, but there is no utility in the driver for the HP Laserjet 200 M276 package! The SIUtility for the HP 1102 does not work for HP 200!

  I can't disable the Smart Install through the printerdisplay, but I prefer to disable via a tool such as the SIUtility.exe, is there a simular to the HP Laserjet Pro 200 tool?

  Hello

  There is none of these tools for the Laserjet 200.

  You can disable the feature through the façade of the pritner or page EWS by accessing the homepage of the printer through Safari - open the HP Smart Install tab, uncheck enable HP Smart Install and click on apply.

  Shlomi

• print - Laserjet P1102w - new install via USB

  I tried twelve ways to Sunday to get my new Laserjet P1102w to print.  The installation, which took place today, seems to agree.  I've uninstalled and reinstalled the software a couple of times.  A test page is quickly obtained at the end of each facility.  But when I try to print a document, it never makes it to the printer.  Rather, bunch printing just straight up in a queue in the printer on the computer dialog box that clear periodically.

  I ran the HP diagosntic tool.  He told me that everything is fine.

  I installed the printer to an HP Optiplex running Windows7 64 bit.  It is on a network, but I have deskadmin access.

  All the lights on the printer appear to be in good condition.  Nothing that connects, just a light green continuous.

  The question is, why I can not get print comands to my computer (where they appear in the queue) to the printer.

  At one point, I was wondering if something was wrong with the USB cord.  It's long, 16 feet.  But it works well enough to produce the test page to each facility.

  Any advice will be GREATLY appreciated.

  Thank you.

  Minonk

  HI Minonk,

  The connection peut be at fault; the fact that you can get this test page to print means that it is probably OK.  If you can swap a new cable, try this after everything and maybe move the printer more ready for a test.  Again, that is if all other fails...

  Try restarting the spooler.  There are two ways to do this.  You can buy - they're basically the same thing and it's just a matter of which the way is most comfortable for you.

  -------------------------------------------------------------------------------------------------------------------------------------------------

  Control Panel > display icon > Administrative Tools > Services > scroll down... look for > Print Spooler > click on restart the Service

  OR

  • Start > search / type > "cmd" > click on "Cmd.exe".
    Type net stop spooler , and then press the enter key

  Box: If you delete the queue print jobs, you can do this here with:

  • Type del %windir%\system32\spool\printers\*.*/q , and then press the enter key

  Note: the only spaces in this command is a single space between led and % and a single space between * and / q

  • Type net start spooler , and then press the enter key
  • Type exit , and then press enter to exit Cmd.exe

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  It's my pleasure to help.

  Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation for the help.

  Fixed?  Mark this message 'accept as Solution' to help others find the answers.

  Note: You can find "Accept as Solution" only on the threads started by you.