install exe easy start. my version is 9.0.0.3335 for my Sansa mp3 player mod. M230.

Similar Questions

• Drivers for my new mp3 player will not install. I tried everything I can think of without success. The wizard's message is "a facility of service in this INF is invalid.

  I suspect that the drivers on my pc of 8 years are not up-to-date.  Is all the same to unravel without purchase of this internet software?

  Thanks for the replies, I managed to solve this problem by uninstalling the Philips Songbird software provided with the unit and using XP and WMP Device Manager.  Of course, a conflict between the supplied software and my pc system.

• Railroad Tycoon 2 on Windows 7 error - setup.exe cannot start or run due to incompatibility with 64-bit Windows versions

  I'm playing the game "Railroad Tycoon 2-Gold edition" on my laptop which is running Windows 7. Whenever I try to install it, he repeats to me - "the program or feature? \G:\_setup\setup.exe cannot start or run due to incompatibility with 64-bit Windows versions"... .and there is nothing I can't do to go around that at all.  Normally with my old games I can at least install, then just then change to be compatible and is not, but I can not here. Any help would be great I want to play this game, it's one of my favorites and I hate how I can't play everything simply because computers are better than them... If this is the case, then they should still be able to support games that are 10 + years older than them, you know? I can add more information if needed, thank you.

  You must contact the manufacturer to see if they have a patch for Windows 7. He would come by the manufacturer and not by Microsoft.

  Thank you

  Marilyn

• HP Color LaserJet M477fdw MFP: HP Easy Start seems to be working but no PPD file is installed

  I have two Macs.  I ran HP Easy Start approximately 3-4 months on a MacBook Pro and if I look in the directory "/ library/printers/PPDs/happy/Resources ', I can find the PPD that corresponds to my M477fdw printer.  Everything works perfectly fine with this Mac.

  I just bought a MacBook and tries to run the HP Easy Start on it today.  I did install the HP Easy Scan v1.5.0.12 (which was the only choice to install it), then complete the program installation but no PPD files have been installed in the directory "/ library/printers/PPDs/happy/Resources.

  Two Macs are running El Capitan (v10.11.6) but when I ran HP Easy Start 3-4 months ago (when it worked), I was probably on an earlier version of the dowry of the OS.  I checked the logs on the MacBook, and nothing stood out to me.  I used an administrator account to run HP Easy Start, but he has not made a difference.  I ran the tool command line for fixing disk permissions ("" sudo/usr/libexec/repair_packages - repair - standard-pkgs - volume / ""), but he has not made a difference.

  Can someone help me understand why HP Easy Start doesn't work for me on the MacBook?

  Solved.  I found a post that basically describes the following procedure for MacOS El Capitan:

  1. Under "system preferences > Security & Privacy > General > enable applications downloaded on:", take note of the current value (for me it was: "Mac App Store and identified developers").  Then select "Anywhere."
  2. Run the "HP Easy Start".  This time, I had the option of installing "Essential software" - which was never released before and of course, it makes all the difference.  Complete the installation and configuration of the printer.
  3. Check the printer works as expected.
  4. Under "system preferences > Security & Privacy > General > enable applications downloaded on: ', select what you had before.

  No reset the print subsystem, disk first aid, setting the permissions of the disc, or restart is necessary.  Now the PPD files are installed and everything works as expected.

  I checked the security and privacy settings on my MacBook Pro (which I had already installed this driver) and he was also to "Mac App Store and identified developers ' so I think that when I first installed the driver files in the past, I had this version and another version of MacOS behaved differently with regard to the security and privacy settings.  Or, possibly, HP doesn't have one of its files to the installer sign properly after the update.

  In any case, I hope that this message will help someone in the future.

• MsiExec.exe * 32 keeps trying to install when I start my computer

  MsiExec.exe * 32 keeps trying to install when I start my computer

  Hi id75080

  Thank you for using the Microsoft Answers Forums!

  When you get this error? You try to install a program? Or just come to the top when you restart?

  Try these steps and check:

  Step 1: Stop and restart the Windows Installer Service.

  1. click on the Start button or press the Windows keyboard.

  2. in the search box, type Services and then click on the Services element that appears at the top.

  3. expand the Services window and then scroll down to Windows Installer.

  4. right click on the Windows Installer list item and then click on stop, right click again and then click Start.

  Step 2: Unregister and re-register Windows Installer.

  To do this, follow these steps:
  1. click on start and then click Run.
  2. in the Open box, type msiexec /unreg and then press ENTER.
  3. click on start and then click Run.
  4. in the Open box, type msiexec/regserver, and then press ENTER.

  Step 3: SFC Scan

  The SFC utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a sfc on the windows vista computer scan. To run a scan suite sfc as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  NOTE: you must log in using the administrator account and try to install it like that. Or you can also try running the program by right clicking and select "run as Administrator". It should work.

  Step 4: Utility Windows Install CleanUp:

  Windows Installer CleanUp Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Download the latest version from the following link: http://www.microsoft.com/downloads/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Refer to: http://support.microsoft.com/default.aspx/kb/290301/

  NOTE: , We can have only a single anti-virus installed / running on your computer at any time. Conflicts, system crashes and frost can occur if you have an Anti Virus installed and running on the computer.

  Step 5: Windows install

  We need to install the latest version of Windows Installer that is 4.5, the link to it is:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Restart and check if you get the same error.

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet Pro 8600 Plus: Scanner will not install software stopped working/Easy Start

  Unable to scan to computer, but has worked in the past. Error message indicates that the software HP for the Scan of the computer could not be located.  Have been trying to install it, it seems to be downloading but then says that it cannot install because no internet connection.  The connection is fine, works for everything else, shows very well in the status reports.  Tried several times, restarted the computer, nothing seems to work.

  Hi @SD58and welcome to the Forums of HP!

  I'd be happy to help you to install the software for your more than 8600. Using Safari or another browser? It seems strange to me that you can download the software, but then can not install, the installation requires no software. However, the Easy Start probably reaches out using internet to locate appreciate software to install. That being said, I feel the question could be linked so browser that I wonder what browser you use and if you could try another.

  Please let me know the result of using another browser and we can go from there. If using another browser resolves the issue, please click on accept as Solution to identify your post as solved.

  Thank you.

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• I installed creative cloud but it has not installed all the products and when I try to install Photoshop or Lightroom nor install it simply places another version of creative cloud.exe into my list of downloads

  I installed creative cloud but it has not installed all the products and when I try to install Photoshop or Lightroom nor install it simply places another version of creative cloud.exe into my list of downloads

  You try to install from the Web or Adobe Creative Cloud application?

  If you had installed the Adobe Creative Cloud desktop application, launch it and connect.

  Once logged in, click on the tab menu Apps.

  After loading the list of apps apps, Photoshop and Lightroom and click Install next to him.

  Location of the Adobe Creative cloud: C: > program (x 86) > Adobe > Adobe Creative Cloud > VAC > creative cloud.

  
  

  For more details, see the 2 links above mentioned in the previous post

  .

  
  

  
  

• I installed and licensed non-cloud versions of Acrobat and Photoshop, which, after several months, asking me to connect and start my trial version online. What's up with that?

  I installed and licensed non-cloud versions of Acrobat and Photoshop, which, after several months, asking me to connect and start my trial version online. What's up with that?

  even if you do not have the cc versions, follow these tips. Creative cloud applications unexpectedly back in the test mode. CS6, CCM

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• Whenever I start Firefox (version 10.0 - release version) it checks compatibility with Add-ons as if I just installed firefox.

  I had the problem of the Firefox page successfully updated the opening whenever I started Firefox and have been since fixed one, but whenever I start Firefox (version 10.0) it checks compatibility with modules whenever

  Hi organicdj,

  You should watch the unsaved Preferencessection. It could be a problem with the pref file that does not store the fact that this control has already been run.

  Hope this helps!

• Download & install Windows Easy Transfer

  I am trying download & install Easy Transfer from the site Web of M/S to this PC and have problems.

  No. I tried to go at support.Microsoft.com, who told to download/install Windows Easy Transfer on two PCs, the former with Windows XP and a new one with Windows 7. The new PC (Windows & a W.E.T. already installed, but this one, old (Windows XP Hpme, does not, so I went to this PC programs: Accessories/system files/tools transfer, but still unable to get this to work o.))

  You are using the wrong program.

  Windows XP Home Edition does not have Windows Easy Transfer, so you went somewhere on the Microsoft site and downloaded something.  You should have gone to the web page linked above, where you would have had 4 choices: XP 32-bit, XP 64 bit, Vista 32 bit and Vista 64-bit.  Did you download the version appropriate for your system (32-bit XP almost certainly)?

  Assuming that you have downloaded the version appropriate for your system, you should have and then double-click on the icon named "wet7xp_x86.exe" to install Windows Easy Transfer for Windows 7.  The start for this icon must be at the bottom of your start > list all programs.  It is NOT the same as the program that starts the start > all programs > Accessories > system tools > files and Settings Transfer Wizard.  This is the old version, which is designed for the transfer of files, etc. of earlier versions of Windows TO Windows XP.

• The wmplayer.exe file has a version number of 11.0.6002.18005 where__11.0.6002.18311 was expected.

  My OS is Vista Ultimate SP2.  When I try to open WMP, I get the following error message:

  "The wmplayer.exe file has a version number of 11.0.6002.18005 where.
  11.0.6002.18311 was expected.

  "Windows Media Player is not installed correctly and must be reinstalled.

  "Do you want to install the player on the Microsoft Web site?"

  When I click on Yes to the question, the web page, that I have has no option to download WMP for Vista.

  How can I solve this problem?  To help guests or you can provide answers.

  Here are simple instructions from Microsoft Support:
  http://support.Microsoft.com/kb/961047

  On Windows Vista:

  1. Reboot your system.
  2. Open cmd.exe as an administrator by selecting Start Programs/Accessories.
  3. Right-click on command prompt and choose Run as administrator.
  4. Type in
     Unregmp2.exe /UpdateWMPVersion
  5. Press ENTER.

  If this does not help, please report back. I have another method that involves editing the registry.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 7 computer said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  Original title: Windowscodecs.dll missing

  IM using a windows machine 7 and one day, he said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  I don't have to go back, any system restore points

  I ran the/scannow sf in command prompt and it says that the file is corrupted.

  I tried to put the machine in safe mode,

  I tried troubleshooting and software update

  and I tried to download external software to replace the file.

  It also affects the Aero theme, so my background is just a black screen!

  What else can I try that actually work?

  Why we just know it is a virtual machine?  Well...

  Have you looked on your system here to check that the file is actually missing (of course that mine has been replaced):

  

  I downloaded a file called on my OneDrive:

  64bitcodecs.dll (64-bit version)

  The link to my a drive is:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84%212368&CID=EC673DF6F8DFEE84

  You must visit my OneDrive, upload this file to a place, you can find, rename it to WindowsCodecs.dll and then copy and paste in your c:\windows\system32 folder (assuming that Windows is installed on your C drive).

  When you have done so, check again with Explorer that the file is really there (if it was missing before) and if everything looks good, reboot your system and see what things look like.

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery