Install HP PSC 1410 on Mac

Similar Questions

• HP PSC 1410 on windows 8.1

  I am trying to install Hp PSC 1410 8.1 on windows but it does not work. WHY?

  HP b110 works on windows 8.1?

  Hi Marc,

  Iwould propose uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Please let me know how it goes.

• No scanning with hp PSC 1410 printer and a Mac

  I used an all-in-one hp PSC 1410 with a PC running Windows XP and everything worked fine.  Now, I had to connect it to a Mac and I can't use the scan function.  I think that the driver is installed in my Mac does not include the scan function.  I looked for a driver on the hp site and everything I found was drivers with all functions only for Mac OS X 10.6.  My Mac is Mac OS 10.5.8.  Where can I download a driver that includes the function of scan to my Mac?  Or do I have to by another hp all-in-one?

  Have you tried this?

• Not to install the drivers for HP PSC 1410 on computer running Win 7 Ultimate (64 bit)

  Hi all!

  I have been with my HP PSC 1410 with my old computer for a while now, without any problems. However, since the time I upgraded my computer and the operating system (Win 7 Ultimate (64 bit) recently, I find that, although the printer prints my documents and scan them in a certain measure, there is always an exclamation point icon that appears on the device, indicating that it does not work as it is supposed to. I tried to download driver from the HP site files, but the problem won't go away. Any suggestions, anyone?

  Have you installed the printer according to the instructions from HP, which is to install using the cd of HP, or the full software from HP support features and only connect the printer when prompted, or just connect?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=UK&DLC=en&sw_lang=&product=441115#n195

• Printer PSC 1410

  Hello

  Please can anyone tell me if it is possible to set up the printer on a network through a wireless router? The manual describes how do via USB on a PC/laptop, but do not mention the routers. I have a USB port on my router.

  Thank you very much

  Pete

  Hi Pete,.

  Unfortunately the PSC 1410 all-in-One printer is not support wired (Ethernet) / wireless printing, however you can install the printer wireless using a HP upgrade priting wireless kit.

• HP PSC 1410

  Witam. Porszę o pomoc: Mam Windows XP 32-bit (Media Center Edition 2005), zainstalowałem drukarkę, a need zainstalować scaner.  Need driver "hp gwiaund". NIE mogę użyć oryginalnego od CD drukarki, ponieważ nie przechodzi zgodności z Windows testow I błąd wurzuca "Nie można wykonać żądania reason błędu urządzenia z we / wy ' Didic

  ZIBI wrote:

  Witam. Porszę o pomoc: Mam Windows XP 32-bit (Media Center Edition 2005), zainstalowałem drukarkę, a need zainstalować scaner.  Need driver "hp gwiaund". NIE mogę użyć oryginalnego od CD drukarki, ponieważ nie przechodzi zgodności z Windows testow I błąd wurzuca "Nie można wykonać żądania reason błędu urządzenia z we / wy ' Didic

  [Translation] Welcome. Porszę for help: I have Windows 32-bit XP (Media Center Edition 2005), I have installed the printer, and I need to install the scaner. I need a driver "hp gwiaund". "I can't use the original printer CD, because it does not pass the test and wurzuca Windows Logo error" could not complete your request because of an error I / O devices " Didic

  [Please post in English in this forum.]  You can download the complete driver recommended PSC 1410 for HP here.

• HP PSC 1410, Q7286A: Printer does not work

  Hello dear HP support, I found my old printer bought all the cables and cartridges, hung and downloaded the software for win7, but it does not work, scaner works very well, as the copy, but does not print not why so? and is it possible to install it manually? because there are in the list of printers series psc 1500 and 1600 series but not 1400 series.

  Hope for a quick response. Thank you

  Hello arturs143,

  Welcome to the HP Forums.

  I see you are trying to use your Psc 1410.

  If you have not already, please throw a document on the scanner glass and try to make a copy.  If the copy works, we would be able to get the printer installed on your computer and try some impression.  If the copy does not work, we will need troubleshooting of the printer.

  Please write to me at the time when you have the time with copy of test results.

  Thanks for your time.

• Center of HP PSC 1410 XP Solution

  I have recently re built my PC with a new SSD and have got to the stage where I need to re - load drivers HP & Solution Center HP for my PSC 1410. I am running Windows XP - SP3.

  I have the drivers for the printer impression but cannot find the software for the HP Solution Center, without which I can't scan or photo copy etc.
  Any suggestions someone please?

  Hi Waterboy 71,

  Yes, it worked!

  I downloaded the ' PEH-AmericasEuro1 - Express_NB.exe' according to the link you kindly sent, installed and all the familiar functionality again got back to my trusty ol' PSC1410 '.

  Thank you very much for your support and your help.

• HP PSC 1410 all in one printer scanner does not work

  My printer, HP PSC 1410 all-in-one works fine as a printer, a scanner and a copier until I had a virus and had to reformat.  I have the original HP for the printer drive, downloaded the software undated and have loaded, deleted and reloaded the software 20 times.  The printer and copier works well.  Microsoft appears saying that scanner drivers are not certified, etc. and I can't scan to work.  I had put in hundreds of hours trying to get this to work.  I am 71 years old and I already have the computer work for my company 18 years ago.  My inability to solve this problem that bothers me more than anything else.  I need some young soul to help me that whip.  I don't buy a new computer or upgrade to Windows 7 until I fix this.  It has become a challenge, but I need help.  Kenny:

  Hi KennethPlaisance,
   
  Method 1: HP has created an update to update the driver to scan and fix the problem. Check if it helps you to fix the problem.
  For more information, see:
  The digitized files disappear after scanning with HP Solution Center
   
  Method 2: Use the diagnostic utility scan to fix the problem automatically.
  Visit this link to download the utility:
  "Scanning device could not be initialized" and related scanning errors display in Windows XP, Windows Vista and Mac OS X

• Windows 7 includes drivers for HP PSC 1410 all-in-one?

  I am about to replace my Office Tower (currently Windows XP) for one, with Windows 7 pro is installed.  I don't have a disk for the drivers for my printer PSC 1410 All-in-one.  Are they included in Windows 7 where can I download the free after plugging in the new Tower?

  Hello

  You can download the drivers from the followung link:

  Be sure you do not connect USB until the installation invites you to do so.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4062&product=441115&sw_lang=

• Where to find an IP for hp psc 1410 printer all in one

  Hello.

  Anyone know where to find an ip address for hp psc 1410, printer all-in-one?

  Make sure you have the latest version of Adobe Flash installed.

  Adobe Flash

  Download the latest version of the software for your printer on the link below and save it to your desktop

  FTP://ftp.HP.com/pub/softlib/software10/COL11786/MP-35363-2/CDB-AmericasEuro1-Express_NB.exe

  Then download revo uninstaller on the link below and install it.

  http://www.revouninstaller.com/download-freeware-version.php

  Unplug the printer from the PC.

  Revo and see if he can find any installed printer HP software.  If so, right-click the icon of the software and choose uninstall.  During the process you may be asked to remove the registry entries.  If you are, just select and click on delete.  Do the same for any left over files and folders.  When finished, restart the PC.

  Disable any Antivirus and Antispyware software.

  Now, double-click the installer on your desktop to start the installation, the connection of the printer when you are asked.

  I hope this helps.

  Best wishes

  DP - K

• Should I install Norton Antivirus on my Mac El Capitan?

  Hello.  Windows laptop to my husband was recently infected with the zepto ransomware. (Nightmare and we consider very careful.  In the interest of keeping at least 2 copies of disk hard of absolutely everything!  It also infected Dropbox and OneDrive, destroy them.  These people are evil).

  We have improved our security Norton to Premium, which includes protection for 10 devices, including Mac.

  What I should install Norton Premium on my Mac, or is existing protection/security/firewall Mac good enough?  Do not wish to compromise my Mac, if integrated protection is the best to use.  Thank you.  (Recognizing some quick advice.)

  FranNewForest wrote:

  What should I install Norton Premium on my Mac,

  Please do not install all this software protection on a Mac. It is not necessary.

  FranNewForest wrote:

  is existing protection/security/firewall Mac good enough?  Do not wish to compromise my Mac, if integrated protection is the best to use.

  Yes, the built-in protection is good enough.

  Keep the OS X and other applications update.

  For more information:

  http://www.Apple.com/OSX/what-is/security/

• I tried to install windows 7 on my mac desktop now, I have a white screen? Help any ideas?

  I tried to install windows 7 on my mac desktop and now I have a white screen. any ideas to return me to the world of apple?

  How have you tried to install Windows 7?

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• What would be the optimal OS to install on a 13 "MacBook Pro 2009?  El Capitan can be advanced to install on such an old Mac Book Pro.   Thanks for any input on this!

  What would be the optimal OS to install on a 13 "MacBook Pro 2009?  El Capitan can be advanced to install on such an old Mac Book Pro.   Thanks for any input on this!

  El Capitan is the only one to use, clean the shit of your Mac first and if you have less than 4G of Ram, increase to 4 or more