Install Server 2008 r2 with windows 7 64 bit

Similar Questions

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Photosmart Premium C410a install not on laptop with Windows 7 64 bit

  Last week, my printer has stopped working.  I tried a lot of things that didn't work, so I decided to uninstall and then reinstall.  I downloaded the latest driver on the site, and everything was fine until the end of the installation, during the installation of the printer, when he failed the bar of 20% on the bar.  Laptop computer and printer had been recognized on the network as the network diagnostics were very good.  I hit the button try again several times, and it didn't work.  Then I touched then and installed an icon on my desktop I could use later to install it.  I tried the icon and she has not yet.  I then uninstalled and tried to reinstall it again, same thing.  I followed the steps of troubleshooting on the support site.  It seems that several other people on the forum have the same problem.  What can I do?

  P.S. I also tried the diagnostic tool and Installation on Windows 7 Printer Wizard.

  GoTo devices and printers by clicking the windows button on in lower left, if you see your printer and then delete them (right-click). then add a printer on the second line above the page. Select Add a local printer. Create a new port. Port type must be of type TCP/IP. Give the ip address and uncheck the option to query. Select your printer, then add it. With this you will be able to print but won't be able to scan. For a full resolution contact HP customer service.

  WARNING: even if I am an employee of HP comments above are based on my personal experience and not on behalf of HP.

• Problem installing flash player 11.0.1.152 with Windows Vista 64-Bit

  Hello

  I can't get Flash Player to install on my computer with Windows Vista 64-Bit - is not serious if I try with Firefox, Opera or IE (usually, I use Firefox).

  The download is not a problem, but when I run the .exe downloaded, the file disappears from my download folder and nothing happens - not to mention that the launch of a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can not try to start the installation again, until the deactivation of the process via the Task Manager ("that one instance of this application can run"). No matter if I try the download and installation with or without 'McAffe security more' btw - same result.

  I have never had such a problem before - Flash Player 10.3 has been and no problem to install and use.

  I tried all the measures proposed in the troubleshooting section on the official website, including measures for advanced troubleshooting (uninstall the old version, run as administrator, disable the software firewall, disable antivirus, etc.). Nothing helps.

  I have never had these problems with my laptop running Windows 7 - just my desktop computer with Vista 64-bit.

  Any help would be greatly appreciated.

  Try to use installers of links in http://forums.adobe.com/thread/909550

  PS subject moved to the Installation section of the forum.

• Can upgrade you Windows Server 2008 RC with SP2 to Windows Server R2 2012 with the option to upgrade?

  We currently have the server running Windows Server 2008 RC with Service Pack 2 installed. We want to upgrade to Windows Server R2 2012 with as little cost involved as possible. You can run the upgrade Windows 2012 Standard R2 of the disc on a Windows Server 2008 SP2 RC 64-bit environment?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• SITE v2.0 failed Installation on Windows server 2008 R2 with SP1

  Installing CPID v2.0 on Windows server 2008 R2 with SP1, the Setup log reported that the installation failed with the error "CustomAction RollBackSccmComponents returned error code 1603"

  I run the Setup with this command after you open the command prompt as 'Run as administrator ':

  MsiExec.exe /i Dell_Client_Integration_Pack.msi

  I even put the command above into a batch file and run it with the same result. With the help of Trace32, I also found this error to be the main problem causing the failure of this facility:

  "custom action InstallSccmComponents unexpectedly closed the hInstall (type MSIHANDLE) handle provided. The custom action must be set to not close this handle.

  Autour Googling, I came across this link: http://en.community.dell.com/techcenter/enterprise-client/f/4448/t/19416814.aspx to try to perform the steps below, but when I did the steps below, the installation just rolled back without even beginning the installation:

  Steps in the link above:

  *********************************************************************************************************

  "We have found this to be a problem with the way that the custom action is running in the MSI file, it is executed in the context of the user who was unable, we changed this to run in the context of the system that solved the problem. To do is relatively simple;

  First unzip the files from the downloaded executable deployment package. Then, download Orca here, http://blogs.msdn.com/astebner/archive/2004/07/12/180792.aspx. Once installed Orca, do a right click Extract MSI and select, "Edit with Orca. Once Orca lance, do not panic, just click on the top menu and select, "Transform", then select "Transformation." Then go to the 'Custom Actions' Table on the left and find the "InstallSccmComponents" entry on the right; Change the value in the column "Type" 3073, then go to "transform", "Generate Transform", save the transformation in the same directory as your MSI and select, and then close Orca.

  To install, use the following command line;

  MsiExec.exe /i \Dell_Server_Deployment_Pack_v1.2_for_ConfigMgr_A01.msi TRANSFORMS =-number

  = The path to the directory containing the package deployment installation files and your STDS. »

  *****************************************************************************************************

  Has anyone seen this problem before? And if so, how to solve?

  Thank you

  TeeDarling77

  I found myself by opening a ticket with Dell to get this problem finally solved. After the installation of Dell's Support log shipping, they asked me to follow these steps below:

  1 if the SQL DB is on a separate machine, try to create the "SMS_TaskSequence_Action" class in WMI under \\.\root\sms\site_ >.  You can download WMI Explorer to browse if you want to see if this class already exists.  Run the script below will not hurt if it already exists.

  a. here are the instructions to create the custom class.  First open powershell as an administrator.

  b. set-executionpolicy RemoteSigned

  c. change the extension on the attached in .ps1 file and change the file to replace the "site_abc" by "site_their 3 letter site code.

  d. change the storage location of the ps1 file.

  e... \WMIClassAdd.ps1

  f. restart and try the installation again.

  3. If it still does not work, send me the newspaper install again to look at.

  Note:

  Here is what was in the attachment in step C.

  ****************************************************************************

  $newClass = ' new-Object System.Management.ManagementClass

  ("root\sms\site_abc", [String]: empty, $null);

  $newClass ["__CLASS"] = "SMS_TaskSequence_Action";

  $newClass.Qualifiers.Add ("Static", $true)

  $newClass.Put)

  *************************************************************************

  After you run the instructions above and restarted the server, installing v2.0 CPID ended successfully.

  I hope that these instructions will help someone in the future... :))

  TeeDarling77

• Issue of license; need information on the purchase of Windows Server 2008 R2 with 25 CAL

  I am looking to buy Windows Server 2008 R2 with 25 CAL.  The question I ask myself, is that if I were to continue this RDS would come with the initial 25 CAL or it would cost more.  If so, how much per RDS? and how much would cost the package for the Windows Server 2008 R2 with 25 RDS CAL company.

  Thanks in advance

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  Hey Shiva,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsserver2008r2general

  Please do not hesitate to contact us if you have other questions related to Windows.

• Windows Server 2008 R2 with Exchange of HDD replaceable hot backup?

  I have a server that is running Windows Server 2008 R2 with 4 exchangeable to hard drives hot.  3 250 GB disks and configured in RAID 5.  The 4th 1 TB hard drive and used for the backup.  With capabilities to warm the intention was to use the 4th hard drive as a player traded for backup purposes, put the inactive disks in a vault without danger for the security and protection.  Unfortunately I was able to configure Windows backup software to recognize the multiple backup drives.

  I hope that someone is aware of this problem and knows how to solve.  If yes I would appreciate to hear your solution.

  Thanks in advance

  Harry Myers

  Hi Harry,.

  I would recommend reposting in our forum Technet Windows Server Backup, where one of the experts in this area would be better suited to offer you a solution.

• Foundation of windows server 2008 comes with the fax server role?

  Foundation of windows server 2008 comes with the fax server role?

  Hello

  I suggest you to send your request from the link and check.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Users cannot use a smart card to log on a Server Terminal Services session on a computer that is running Windows Server 2008 R2 with SP1

  We have a Windows Server 2008 R2 with Sp1. There was the same exact problem in Windows Server 2008 (KB958596).

  When you use RDP or ICA (Citrix XenApp 6), smart card login prompt at random does not appear. When we close the RDP or ICA and make a new session of the guest of the smart card is here.

  Where can we get a fix, or a reg fix?

  Hotfix for Windows Server 2008 below...

  http://support.Microsoft.com/kb/958596

  In this scenario, users are unable to connect with their card chip and instead, he is invited for their usernames and passwords. If users don't provide these details, the Terminal Services session times out and disconnects.

  When this problem occurs, the option of smart card logon does not appear in the Terminal Services session. Users cannot connect by using their secret codes, and they must provide a user name and password. The option of smart card logon working again after that that they reconnect to the Terminal Services session one or more times

  Hello y2000max,

  Your windows server is beyond the scope of what is generally answered in these forums of consumers. I would recommend reposting among our public IT to Technet-Windows Server securityprofessionals. Thank you!

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• I want to install Server 2008 in c2d 2.6 ghz is possible

  Hello

  I want to install Server 2008 in c2d 2.6 ghz is possible

  Kind regards

  Patrice Hiren

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  This happened on 02/10/15 and happened again on 24/02/16. We have two printers that depend on this file. HP Color LaserJet 553 and HP LaserJet M604. I have over a hundred of the M604 on my network and the last time that this happened, it dominoed across the print server system.  This has also caused some spools of printing stop on end users. The only way I can get end users up is to uninstall the driver package.

  This issue affects the Windows Server 2008 and windows computers 7 as well.  Try to determine why this has happened twice and determine how fixit before the rest of my Server 2008 and end down as well.

  The error lies in the hpb6sy2917_x64gui.dll.

  

  This time I had to remove the printers and drivers with a regedit. I also deleted all files in all files for 2917 in the

  C:\Windows\System32\spool\drivers\x64\3 folder. But this time, when I reinstall the M604 M553 drivers and it lowers again print server spooler. I'm frustrated to say the least.

  I tried clearing forcefully queues by deleting files in C:\WINDOWS\System32\spool\PRINTERS

  Hello

  According to the description of the problem, you work in the Windows Server 2008 domain environment. So, I suggest you to republish your query on the TechNet forum, which is run by the other IT professionals who are trained on the server issues. However, you can try to run the REG file that was downloaded in the link provided by Ramesh Srinivasan in his position, responded on June 2, 2012 in the thread link provided below and see if it helps you to solve the problem.

  Deleted print spooler service

  http://social.technet.Microsoft.com/forums/Windows/en-us/9d0bd665-621d-449E-a22f-b512e068ba2a/print-spooler-service-removed

  If the problem persists, try to repost your query on TechNet forum. Keep us.

  Kind regards

• How to install an i phone, cloud services say is not compatible with windows 7 64 bit

  Just got an i phone, plugged into the laptop and windows recognized, downloaded tunes and cloud services, i ran the update and installed it on the correct phone but I optimizes freezes and cloud to say that windows is not compatible with windows 7 64 bit PC is plugged and not wireless then is the problem URL not entered into the phone again, got a few apps downloaded to the phone, but not all, went on apples website and is a lot of people complain that phones it will not work after you install the latest update.

  Server ISP (telus) will not help, even if I bought the phone from them, they tell me I have to call apple to the United States for help, I'm paying long distance of the Canada. Not used for cell phones it's only my second, getting e-mail ok.

  can anyone suggest what to do to solve the problem, the cost of phone $649.00, expensive for something that I can't go to work as it should.

  Thanks in advance.

  Support for products Apple is located in the Apple Forums:
  https://discussions.Apple.com/index.jspa