Install the CC on 2 devices

Similar Questions

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• How to install the Illustrator on multiple devices?

  We are many users trying to install the Illustrator to other devices in our office, is this possible?

  Please explain step by step.

  Kindly appreciated.

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• HP Support Assistant is unable to install the drivers wireless wireless device not recognized at startup

  Name and product number:

  HP Envy Sleekbook4 PC / / C2K72UA #ABA

  Intel Centrinto Wireless-N 2230

  Microsoft Kernel Debug network adapter

  Realtek PCIe GBE Family Controller

  USB - IF xHCI USB Host controller (Intel WiUSB)

  Inter 7 series / C216 Chipset Family USB Enhanced Host Controller - 1E26 (there is a similar device that works but ends with 1E2D)

  System Operalting:

  Latest Windows 8

  No error message.

  Changes:

  Uninstalled some things via the control panel (I don't know where I can find a newspaper which has been uninstalled)

  Attempt to system restore and it failed.

  My diagnosis:

  First of all, some info on why the devices do not work.

  The USB controller claims there are insufficient system resources to complete the API. However, I am only using about 20% of my memory and my hard drive. If I deactivate and reactivate the device through Device Manager it starts working until the computer passes in mode 'sleep' or reboots.

  The Realtek PCIe controller and Intel Centrino Wireless adapter simply read {operation failed}. If I disable and re-enable these devices via Device Manager they begin to work until the computer mode "sleep" or reboots.

  The Microsoft Kernel Debug network adapter "is not present, is not working properly or is not all its drivers installed."

  Intel WiUSB - windows cannot load the drivers for this device (code 31).

  The HP support assistant tries to download and install "Wireless for windows drivers 8. The download succeeds, but the installation fails.

  At startup, windows thinks that there are no network adapters (other than bluetooth). After the reboot of the devices from the Device Manager, they appear in the section of the network adapters.

  Thank you in advance for reading this and any help you may be able to offer,

  Tim

  I see. Unfortunately, the failure of the short DST means that the hard drive needs to be replaced. The computer is still under warranty?

  If so, you can contact HP Technical Support and ask them to send you a replacement. This replacement will come with recovery media. If you don't have an external CD drive, make sure you request a recovery rather than recovery disks USB. They should know that the model already, but, I would make sure. Once you have received the new hard disk, you will need to send the back of an old man in this same area, using the provided shipping label. The technician on the phone will give you the details on that.

  HP 1-800-474-6836 Technical Support

  If the computer is out of warranty, you can replace it with any HDD notebook 2.5 ". If you need help choosing a car, let me know

• I can't install the driver of Unknow devices.

  Hello!

  My laptop computer intsalled Windows 7, I have install the driver, but he is a pilot, I can not install, which is Unknow driver. I find the complete driver on the hp homepage, but I can't find the driver of Unknow devices. My laptop is HP Pavilion dv4-1102tu.

  Please help me find the driver Unknow.

  Thank you very much!

  My devices is Unknow:

  ACPI\HPQ0004

  HPQ0004

  Find me this driver.

  Thank you very much

• Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

  Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

  I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

  I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

  Hello
   
   
  The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
   
  Step 1.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
   
  Step 2.
  Here is the link to download the latest drivers.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK
   
  Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
   
  This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
   
  For more information see the links below.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MAX 14.0 broken and database corrupted after installing the latest drivers of device and LV2014

  I have LV2012 and 2013 (both 32-bit) installed on my system Win8.1 64-bit and you used without problem.  I recently went through the agony of installation LV2014 32 - bit Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work.  First of all, it is slow to fill the display of system information, then when I try to develop a tree I get a MAX database connection error (see table) and there is no software listed at all.  Third, devices are not listed correctly even if appearing in Device Manager (eg. a CAN interface is no longer lists CAN0 but shows the device but no configuration, even for devices USB DAQ I(see attached), and I CAN installed 14.0), and there is nothing in the data area.

  The first attempts to install LV2014 were prevented by the mDNS NOR answering machine and without stopping when required by Setup of services.  This also affected attempts to fix the MAX.

  All 3 versions of LabVIEW run OK, but projects include more distance or RIO/FPGA hardware - perhaps because of uninstalled software - but without the list of software to MAX, I can't say what is and is not installed.

  I did a reset Configuration data, fixed MAX several times, uninstalled (all the all dependencies), activated the firewall and antivirus and completely reinstalled LV2012, LV2013, LV2014 and device drivers, but without touching the problem.  I have now lost 2 whole days and I start to desperate for a solution.  Surely this can not be the only case of this in the world.

  Mike

  CLD & Alliance member, UK

  Hi Mike,.

  The link below is what you will need to follow to remove the Corruption of database of MAX. It is a removal tool 'automate' the data removal process. . The second document below are the steps for the traverse removal tool.

  MAX Database Corruption removal tool
  https://decibel.NI.com/content/docs/doc-12805

  What is the process of removing MAX Database Corruption
  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  I highly recommend using the removal tool, as it will do this process for you, you will just need to follow the guests who come to the process.

  Concerning

  Mark

• Tecra 550CDT - how to install the OS on this device?

  I just received a Tecra 550 TRC, which worked beautifully on Win 98, until it is the previous owner attempted an upgrade to Windows XP. (Probably not very wise in view of its features!) In power, he gives the choice of Windows 98 or Windows XP, but doesn't work. He points out just a lot of missing files, says that Windows cannot load and goes back into the C: prompt.
  Any help or suggestions on how to recover for Win 98 would be appreciated.

  I have a Win 98 CD. But the computer is not a floppy drive, I think it was an external option. If that were the case, it is now lack unfortunately. So which may limit the possibility of recovery. Also, I have no documentation or drivers, so even if the collection for Win 98 is reached, I guess it takes drivers for display and the tracker "green button"?

  Thanks a lot for your help. even if it is a mobile phone fairly old, it IS a laptop! I would find very useful when it is in motion, and the battery seems fine.
  Is there documentation anywhere online?
  Had a pretty good look but the records retrieved.

  Hello

  If you have an external USB practice that could help us to do this installation. Otherwise you can boot into dos mode by pressing F8 during startup. Then enter Windows with the command prompt, assuming that he has enough pilots to do this. If you manage to do, run an FDISK to format everything and start a clean install. That should make it work. Win98 and WinXp likely came into conflict, and should be deleted so that you can reinstall it. I hope this helps.

• I have a gatewart dy 4025gz. With a ptba broadcom wireless. After I installed the drivers I gat device wont sta

  I have a 4025gz gateway with a broadcom wireless card. After I inatall drivers I get does not start code 10. Worked before I reinstalled windows. Windows xp service pack 3.

  Hello

  See the resolutions listed in the article below and check.
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

• Install the drivers for USB devices is time consuming

  Original title: slow down the device

  I use Win7 Ultimate (32 bit) on my computer compaq laptop.

  Whenever I connect a USB/device via USB or Bluetooth device, installation of the driver takes a long time.
  Please help me solve the problem soon!

  Hello

  What is brand and model unit?

  Method 1: Run the hardware and devices Troubleshooter

  See the following site:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

  Note: When you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

  Method 3: Update the Bluetooth device drivers

  See the following site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

• HP E6300 D drive is empty. Is it possible to download and install the information for this device...

  

  Drive D contains locked files that are used to perform a System Recovery (resettlement) and are not normally visible to the user.

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Trying to connect Samsung device but he repeats to me it's installing the software device driver.

  So whenever I try to connect my Samsung Galaxy S4 active on my Windows Vista computer all it say is that is install the driver software of device, then it will say software successfully installed. So I'll start button, and then the computer so I can get the files on my phone, but nothing is there, then a few minutes later in the corner he'll say it's install software device driver, again. I don't know what the problem is. My camera says it is USB MTP, so that I can transfer files, but it does not work. My device used to knit then I updated my computer, it has been for most of the security stuff, I don't know if maybe that has something to do with it. Help, please. Thank you.

  Hello

  Try the solution listed in this thread of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/problems-connecting-Samsung-Galaxy-S4-to-Windows-7/bb1a1d2d-c30e-4AFA-93e2-3364b86692b5

  Have you tried to download and install the drivers yourself, then plug in the usb cable?

• Satellite L300-01:00 PSLBGE - cannot install the graphics driver

  Hello everyone.

  I have a big problem with my laptop video driver.
  Yesterday, I started my windows and put Windows Vista on it.
  I got all the drivers from the toshiba site but ran into a problem with the graphics driver.

  When get it Setup starts and them it gives me an error "this computer does not meet the minimum requirements for installing the software. The Setup will exit. I must say that before the start, I also got Vista and it worked.

  So can you please help me because I don't know what to do to...
  I tried all the possibilities

  Thank you very much

  Teodora

  Hello

  You can try to install the graphics driver in Device Manager.
  Go to the Device Manager, choose graphics card, click on update driver, then point to the (ini files) graphics driver files stored on the HARD disk and complete the installation

  Try this usually it should help

• Installing the audio driver in Satellite A100-773

  I just installed Windows XP SP2 on my Satellite. I did a backup driver CD with my recovery CD. Now, here's my problem:

  I followed the Installation Instructions and each device works fine, except my audio driver, I also have an unknown PCI device. I expect that the PCI device is the problem for my work not driver Sound. Maybe someone knows an answer to this problem.

  I guess that the audio driver has not been installed correctly and so the sound doesn't work on the laptop. I think the unknown PCI device is the sound card.

  I put t know how you installed the audio driver, but I recommend you download the latest version of the Toshiba page, then install the audio driver in Device Manager.