install the device for audio output on hp pavilion dv 6000

Similar Questions

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• If Windows will send a message when she install the driver for a USB device successfully or unsuccessfully?

  As you know, the window search and install the driver for a new device (USB) coming. We can get the status of the device through Device Manager manually. but I was blocked by the following questions when trying to obtain programmatically.

  Is it possible for me to get the driver installation progress window? Or how could I get the event that she has finished the installation and the result (install has failed or succeeded)?

  Best regards

  -Alvin Hu

  Vista does not send these messages and cannot be configured to do this (progress or when it is done or if it succeeded or failed).  The only way to make sure is to plug and then, go to start / Control Panel / Device Manager and check for the device and click on it for more information on its status.  You can also check if the appliance does not work - it's probably faster and more accurate.  Many USB devices indicate their status by starting to work (a mouse begins to scroll, a USB flash drive or an external USB drive to bring the Autorun screen or appear in the Windows Explorer,...) and USB devices tend to start working quickly enough so it should not be a long wait.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• I need to install the device basic system for my acer aspire 6920

  I need to install the device basic system for my acer aspire 6920

  In Device Manager, what device is showing a yellow exclamation?

  Pilots are obtained from site Acer http://www.acer.com/worldwide/support/ support

• Windows need to install the driver for your bluetooth device

  Hello

  I own the HP Pavilion dv4t-1300 CTO Entertainment Notebook PC

  Runnin vista 64-bit for a year. affected by this bt prob 4 last 1 week...

  on switchin' on bt this error mesge

  "windows should install the driver for your bluetooth device.

  automatic update of windows I've tried

  looking for a driver to support/broadcomm hp product support

  tried installin manually

  BUT NOTHING has WORKED.

  help please...

  For this you need to 1 know which device is... Now, I was not able to find an easy way to do that, other that simply remove these devices one by one and see if the entry from Device Manager will... Or the other thing you can do, is use the reliability monitor and to see after what event the problem started...

• How to install the patch for the security hole last QT process running on a Dell with Windows 7 (Windows 10 upgrade) laptop? I got a message from my program called Belarc that the patch is missing on this device. Thank you

  How to install the patch for QuickTime Pro for Windows 7 on a Dell laptop... I got an alert through a program which I run from time to time (Belarc) and it says that there was a security breach detected by Apple (or one of its vendors, who manages the security of the operating system such as Cisco) during December 2015.

  Please notify.  Thanks in advance for your guidance pertaining to my question.

  Download QuickTime for Windows - Apple 7.7.9

  Apple ends development of QuickTime Player 7 for Mac and Windows operating system, so don't expect much more beyond this last version.

  The installation shows are supported for Windows 7 and lower, so I don't know what to expect on Windows 10.

• Pavilion dv3: cannot install the driver for graphics (Clubhouse dv3)

  Hello! I can't find and install the driver for graphics card. I see on the device manager that without "ATI radeon 5400 series.

  someone help me! Thank you

  Hi @QuanTrinh

  Welcome to the Forums of HP Support! I want you to meet some problems to find a graphics driver. I'll be happy to help you with that. Let me start by getting your product number , there are a number of dv3 models in this series. I also need to confirm that you are using Windows 7 32 - bit as well.

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• Unable to install the driver for the network printer, the reason according to HP's Service: MSIServer

  Original title: Error code: OX8004FF01

  While trying to download microsoft security essentials on a computer running Windows XP Professional with service pak 3

  I received a cannot install security essentials (OX8004FF01 error code)

  I removed all Norton parts from this computer and the firewall is turned on.

  So, what is this code and how to fix the problem?

  I am not able to install the driver for my network printer, is the reason according to HP

  Service: MSIServer

  Microsoft manufacturing

  Version: 0.0.0.0.

  The name of the HP printer file is: 100_228_PS_A10_02_Full_Net_enu_NB.exe

  Any help with these problems would be appricated: * address email is removed from the privacy *

  Hello

  What is the model number of the printer?

  Help with Microsoft Security Essentials issues, contact the Microsoft Security Essentials team. You can use this link to contact them.

  http://answers.Microsoft.com/en-us/protect

  For the printer problem, check these links and see if they help.

  Method 1: Refer to this link.

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003.

  http://support.Microsoft.com/kb/315346

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:http://support.microsoft.com/kb/322756

  Method 2: Install fixit from the following link and try to install the drivers.

  How to fix MSI software update registration corruption issues

  http://support.Microsoft.com/kb/971187

  Also visit these links:

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  How to install a printer driver locally for a remote printer in Windows XP: http://support.Microsoft.com/kb/282842

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• How can I install the driver for my monitor Linksys Wireless adapater?

  Hi, network monitor is installed when you set up the installation does not work properly so I want to install the driver for my Linksys Wireless adapater only. I've done it before, but I don't remember how.

  WUSB54GS model number

  I seems that you try this with the installation CD... Uninstall the drivers will flow and the monitor. Put the installation CD in the CD drive. and as soon as the Installer starts out out of it.

  Go to Device Manager... Try to install the drivers for the cards by selecting the location as the CD drive in my computer.

• HP LaserJet Pro 100 color MFP: install the driver for color laserjet MFP m175a pro 100 failed at about 83%

  When I connected the printer to the system recognizes it as a cd player.

  I tried to install the driver (from the HP site), but it stopped at about 83% with General error msg.

  UAC is disabled and .net framework advanced fetures is not installed.

  I see an error in the event viewer, without and the error number:

  Message: The object of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.
  Source: mscorlib

  Hey @yechiel-adar,.

  Welcome to the Forums of HP Support!

  I understand that your color HP LaserJet Pro 100 M175a multifunction fails to install on your computer Windows 8.1 as the computer recognizes your printer as a CD drive and the installation fails at 83%. I would like to help you to solve this problem today. To be honest, it sounds like there is a conflict between your computer and the HP Smart Install feature. Smart Install is a feature that has been programmed into the new models of Laserjet. It allows you to simply plug a USB cable and the installation files will load on your computer for you for faster and easier installation. However, on some computers systems rather find recognizing printers printers rather than software CDs. In this case, the installation never ends with success that your computer never actually detects the Laserjet Printer. That being said, I'll guide you through a few steps below to resolve this issue.

  Please, disconnect the USB cable from your computer before you continue.

  Step 1: Disable Smart Install:

  1. On the front panel of your printer, select the button Setup (key)
  2. Right arrow to the Service menu , and then select OK
  3. Right arrow key for Smart Install and select OK
  4. Please turn OFF Smart Install

  Once Smart Install turned offshore, please proceed to the next step.

  Step 2: Uninstall the drivers:

  For the purposes of troubleshooting, it is crucial that we have a clean slate to work with. Even if your ever successful installation there is a chance that a part of the software package and the pilot has made its way on your computer. To ensure that there are no problems when reinstall us your printer, I'll first you remove all traces of your printer from your computer.

  1. Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen, type programs and features. Click on programs and features to run
  3. In the window programs and features will populate a list of the programs installed on your computer. Please scroll down and look for your HP Laserjet. If you see the Laserjet listed please select it and choose Uninstall
  4. Follow the instructions on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 3: Delete the temporary files:

  1. Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen please type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. R ight, click on the recycling bin on your desktop and select empty recycling bin

  Step 4: Install the device:

  1. Please click here to download and run the installer full feature software and driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your HP Laserjet Printer
  3. Do not connect the USB cable until the installation window invites you to

  Once the installation is completed successfully, please test print to confirm that your product works as normal.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Family Vista pre-configured premium 32 cannot install the driver for my camera Nikon D70 and Nikon 200

  Hello

  Sorry, but I'm really frustrated trying to talk to Microsoft/Toshiba/Nikon. PnP on vista for nikon camera doesn't work simply in PTP mode (in camera). I tried to restart, USB drivers uninstall and reload, reinstall all the nikon last edition software, java/sp2/firmware update on nikon and removing the INFCACHE.1 on vista, but nothing works. I don't know what I can do to make it work. I would appreciate if someone can help me on this.

  Here is the description of the problem

  Description

  Windows encountered a problem installing the device drivers for your NIKON D70 DSC

  Signature of the problem

  Problem event name: PnPDriverInstallError

  Architecture: x 86

  Win32 error: E0000219

  The INF name: nkctlptp.inf

  Driver Package hash: 6994238a841a4009328cd36fb0be54c40686c5ed

  DDInstall section name: NO_DRV

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  DMI626B.tmp.log.XML

  oem84.inf

  Description
  Windows encountered a problem installing the device drivers for your NIKON D200 DSC

  Signature of the problem
  Problem event name: PnPDriverInstallError
  Architecture: x 86
  Win32 error: E0000219
  The INF name: nkctlptp.inf
  Driver Package hash: 6994238a841a4009328cd36fb0be54c40686c5ed
  DDInstall section name: NO_DRV
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem
  DMIF1E3.tmp.log.XML
  oem84.inf

  Hi Photog09,

  Remove the upper filter and see if the problem is resolved. Otherwise, you can run the Microsoft Fixit who will make changes in the registry automatically. Open the link below and click it on the Fixit button.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Dell laptop, cannot install the drivers for USB drives.

  Although the fans more of my family and the power of Google, I can not solve this problem is to have my sister.

  Each USB key she inserts into his laptop computer are, although recognized, never installed.  For example, when I install in another computer USB flash drive, the typical action should be that either the system operating rises automatically the drive to a letter on my computer, or invite an Assistant saying that it will try to install the drivers for the flash player and do it automatically.

  When I insert a flash drive into this laptop, however, it will prompt me to find the location of the folder where the drivers for the USB key is installed.  When I ask for an alternative, he will try to find it through Windows Update for drivers, then answer he found nothing.

  I tried to assign the same flash as a generic device drive in Device Manager, but nothing helps: the flash player still will not mount in my computer properly.  Windows Update, moreover, indicates that the system is up-to-date.

  Any ideas on how to fix this, so that the laptop in the world will recognize volumetric flash drives and devices entry without asking for the location of the driver?  That is, a system of 'plug & play' with all USB devices?

  "Windows Update, moreover, indicates that the system is up to date."

  You get the manufacturer's operating system hardware drivers: Dell.

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.
  Mick Murphy - Microsoft partner