install the new hard drive on the dv7

So I'm about to install a new hard drive in my dv7, but remove the battery cover, then said drag training with tap pull on the reader, but does not move any direction. I have never replaced a front disc on my laptop and do not want to damage anything. But what am I I miss it please help.

Thank you

Ken

Kenny sent me a personal massage with his problem on how to remove the hard drive, so it was my response to him. Finally the problem was the tab which had to be pulled to remove the drive was hidden below, there was nothing to shoot. For someone who never removed a hard disk, this would not be an obvious thing to understand.

There are a whole bunch of pictures that I sent to him I thought to be very useful here. The photos are of a dv8.

It should be just sitting there. You have a digital camera. If you do I will help you with the steps to upload a few photos so I can see what is happening. What is your new model number. You can also use a small screwdriver to lift gently over the blue of Assembly seats.

Tags: Notebooks

Similar Questions

  • How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

    How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

    Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

    Designate a library in pictures - Apple Support System

  • After installing a new HARD drive, I get a screen "control i to access the configuration utility.

    Help?

    I installed a new HARD drive on my xps 15 because the old drive crashed. Everything works fine and the system boots perfectly. Before entering the Dell splash screen, the screen "control i to access the configuration utility" appears for 5 seconds. After that, the normal boot sequence resumes. Can someone please explain to me why this is happening and what I can do about it?

    Here is a link to the screen I get started: http://s102.photobucket.com/user/alexcinie/media/photo_zpsb75f0a7f.jpg.html

    The mSATA drive is used as a cache for the hard drive dynamic - these are essentially implemented in a RAID 0 array.  See the link below (it is for Alienware, but applies to your system as well).

    If you want to keep the disk cache, you need to configure the array as shown.

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/kcsarticles/ArticleView?docid=564442

  • I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

    I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

    Using the Dell recovery disks to reinstall?

    The origonal drive failed?

    If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

  • Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

    Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

    Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

    Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.

  • I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking

    I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking to be uninstalled and reinstalled I can understand. However, should I do before moving on to Windows 10?

    Yes

  • I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

    I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

    Download the CS5 products

  • If I do not support until my MBP before installing a new hard drive...

    Very quick question:

    If I don't support my hard drive before installing a new hard drive, SSD, the MBP (early 2011) "know" download all the OS X software appropriate and that sort of thing? I guess my question is: is the part of the hard drive of the same hard drive recovery? Or on a separate physical disk.

    I don't have a time machine, and it would probably be easier to start from scratch.

    Thank you!

    If your computer comes with 10.6.8 or earlier and did not have its updated firmware updated to use Internet Apple system recovery, it is only on the internal drive. Otherwise, separate recovery methods are in the firmware and the drive internal.

    (139248)

  • I installed a new hard drive on my computer and re-loaded windows vista. Will not be installing SP1

    I installed a new hard drive and re installed windows vista. I can't install SP1 because it is not supported anymore. Can I install SP2?

    1. Learn how to install Windows Vista Service Pack 1 (SP1)
      http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx
    2. Learn how to install Windows Vista Service Pack 2 (SP2)
      http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    http://support.Microsoft.com/kb/947366

    Manually install the SP1 and SP2 then.

    The links above will advise you where to get the standalone etc versions.

  • Install a new hard drive - need advice!

    I intend to install a new hard drive on my Compaq C500
    All hard drives are the same physical size or do I need a specifically for this laptop?
    I do not have the windows install disks, but I have the sticker on the laptop with the product key to this topic, is it possible to download and install it?
    And what I have to install the drivers manually or it will install when I install the OS?
    Thank you
    Tom.

    I don't know of anyone who has a copy of it,
    Is there a way I can download and install with the product key that I have?

    Yes, but if it is not an official partner, I can't give you the link.  And currently I don't know any for Windows Vista.
    For Windows 7 (Digital River is an official partner of Microsoft): [link]

    I guess your best option is to contact HP support by phone or chat online at http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    Sorry,
    Digilodger

  • Having trouble installing new drivers after installing a new hard drive and Windows Vista.

    I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

    original title: new installation from hard drive problem

    Hello

    I suggest that you run the Startup Repair tool and check if it solves the problem:

    Startup Repair: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.

  • Install a new hard drive and copy that

    I have a gateway that I bought at wal-mart about two years ago, it was windows vista Basic.  The hard drive is failling and I am wanting to install a new hard drive but the laptop didn't come with a cd of the operating system.  Is it possible to copy the old drive to the new so that I don't lose all the files and I didn't buy a new operating system?  Also I can do this with a USB key, do not know how to connect two internal hard drives at the same time.  I would like to as cheap as possible but need to do anyway.  Thank you

    I have a gateway that I bought at wal-mart about two years ago, it was windows vista Basic.  The hard drive is failling and I am wanting to install a new hard drive but the laptop didn't come with a cd of the operating system.  Is it possible to copy the old drive to the new so that I don't lose all the files and I didn't buy a new operating system?  Also I can do this with a USB key, do not know how to connect two internal hard drives at the same time.  I would like to as cheap as possible but need to do anyway.  Thank you

    Hey rcfball66

    You can always buy a gateway vista recovery disk to reinstall vista back to the factory with the new drive settings

    They provide at a nominal cost

    manufacturers of hard drive normally supplies free software to their Web sites for the movement of the operating systems of the old hard drive to the new hard disk cloning you buy home

    You can also use programs third 3rd to do this, or upgrade Vista Home Basic vista full for pc full upward

    but you can normally buy 3rd party programs

    read below information about such a program

    http://www.Acronis.com/homecomputing/products/TrueImage/

    Walter, the time zone traveller

  • I INSTALLED A NEW HARD DRIVE AND FORGOT TO BACKUP MY DATA

    I INSTALLED A NEW HARD DRIVE AND FORGOT TO BACK TO THE TOP OF MY DATA IF I DON'T REMEMBER MY CODE TO SECURITY/PASSWORD OF THE WIRELESS ROUTER

    You need to reset your wireless router if you do not have access to it to retrieve your security code.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/189126

    "Microsoft's strategy concerning lost or forgotten passwords"

    Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

    See you soon.

    Mick Murphy - Microsoft partner

  • clean install on new hard drive

    My hard drive crashed on my Hp laptop.  I installed a new hard drive and want to install my os vista on the computer.  I did the recovery disks when I bought the computer and told me that I could reinstall the operating system on the new hard drive.  My problem is that I keep getting error codes 1005 and 100a.  It stops the installation.  I then told me that I have to buy own recovery disks.  Can someone make me scroll through the process of getting the OS on my computer.  Can I use the recovery disk that I did or do I need to buy new, or I need to find a single version of full vista... Please help and thank you in advance!

    I'm sorry but it is the HP recovery, not Microsoft Software/process of.

    Also, you did your own Disk(which is correct to do) Recovery, but nobody would know if you make them correctly, or not.

    http://welcome.HP.com/country/us/en/contact_us.html

    Contact HP above the link for any problems with their software/recovery process.

    See you soon. Mick Murphy - Microsoft partner

  • Install a new hard drive

    My Presario CQ5700F 500 GB hard disk is dead. If I install a new hard drive, but I can't find my recovery disc and HP has no more recovery for this PC model Kits. How can I put Windows 7 Home Premium 64-bit of the system back on my computer? Help me please.

    Download the version of Windows 7 which shows on the COA sticker and use the key code too...

    Make sure that the COA key code is readable before you download the ISO, because without it, the ISO has no value. You should also keep a note of the key code in a safe place.

    Windows 7 Home Premium SP1 - U ISO

    English x 64: X 17 - 58997.iso

    You will need to convert the download on a bootable DVD...

    http://www.isoimageburner.com/

    Note that you will have the task to install all updates from Windows Update Windows. Do NOT check, download and install the drivers on Windows Update.

    You will also have the task of getting the device drivers which should ONLY be obtained on the website of computer manufacturer, UNLESS the manufacturer of the computer directs you to Windows Update. Start with the CHIPSET drivers and work from that point, video, audio etc...

    Also, do not use the Web DRIVER FINDER sites. Always use the computer manufacturer OFFICIAL site...

    After you complete the above tasks, install Microsoft Security Essentials and then finish with your favorite programs.

  • Upgrade to Windows 8, but I need to install a new hard drive first

    Hello

    I'll be upgrading my laptop's current (under Windows 7 Pro) to Windows 8 Pro for $40 on October 26. Before you install Windows 8, I'm going to install a new hard drive in my computer. I need some help on how I can do this...

    Is it possible for me to install the new drive hard while I am upgrading. I plan to do a clean install anything. If so, how should I go to?

    Thank you very much for your answer.

    Mike

    Create the backup of the image that your computer is now (with Windows 7) before installing Windows 8. If anything should go wrong then just restore Windows 7.

    I would like to disconnect the LAN cable and any other unnecessary internal or external device before the upgrade. If all goes well then connect the local network and activate Windows 8.

    J W Stuart: http://www.pagestart.com

Maybe you are looking for

  • How to export the bookmarks?

    In older versions of Firefox it was obvious how to export bookmarks. On the new version, I have not a clue. I need to move the bookmarks to another computer Bill

  • BIOS update failed: the process does not have this system. The process of the utility is not complete.

    I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error

  • NVIDIA driver

    Today, I have reinstalled Windows 7 Home Premium on my Lenovo Z570 i5 - 2430 m, 6 GB of ram, nvidia 540 m. Before, I had an icon that says, what programs run on nvidia. The video drivers are from Web site intel and nvidia, because they were more rece

  • oscilloscope...

    Hello I use the generate an example of digital pulses finished vi to the ttl to generate from my card NI PCI-6601 impulses. I want to see the pulse output on an oscilloscope, how can I do this? How can I connect a graphical indicator to show the puls

  • Phase shift a channel and display

    Hello I'm working on a project for which I have to display the I-Q constellation plot and normalize the data to fit a circle of unit RADIUS. I'm able to do this, but the problem is sometimes the signal in one of the channels is very low and therefore