Install the wizard on Windows XP loss

Similar Questions

• LF161UA #ABA: HP download and install the wizard never ends

  Laptop HP Pavilion G7

  Running Windows 7 Home Premium SP1 all updates applied.

  Today, I got a notice from HP Support Assistant, that there was an update of firmware for my all-in-one HP Deskjet 3520 printer. I went to download and install the firmware that first downloaded and installed the HP download and install the wizard. Does OK no problem yet.

  The HP download and install the wizard then downloaded the firmware update and installed on my printer. The installed firmware version has been STP1FN1351AR. I know it's done installation for my printer has printed a page of the printer hardware information and now returned to sleep. However the HP download and install Assisitant still works. He says that's it 100% but he also says to install next to the progress bar. There is another open window called "HP Device Update" which has a progress bar that keeps to be full and then starts all over again, he seems to be in an endless loop.

  I'll close these two windows but he thinks someone from HP should know what is happening with their program to download and install the wizard.

  I am including a screenshot of the two windows so you can see what I see.

  George-p wrote:

  Hi @RayGo75 ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about this here.

  Kind regards
  George

  Well well for almost a year that I posted this and no HP never contacted me for more information. I now use windows 10 then is no longer a problem.

• Satellite L555-110 - cannot install the Eco on Windows 7 utility

  Hey everybody,

  I can't install the utility on Windows 7 Professional 64 bit Eco. After loading the files, the installation routine stops and says no "supported BIOS". I use the latest version of the Eco (v1.1.11.64) and BIOS (v1.70) utility.
  Additionally PC Health Monitor does not work too. Setup concludes with '' don't support. ''.

  Any idea?

  Thank you in advance.

  Robert

  Hello

  You have installed all drivers for the laptop again or can you notice any yellow exclamation in Device Manager?

  I checked the Toshiba page and normally this laptop supports the Eco utility.
  Eco Utility works on the factory settings? I mean the version preinstalled Windows or you have only this question on the current version of Windows 7?

• I can't install the update of Windows KB951847x86. Any help on this? Thank you.. .ragtopkid

  I can't install the update of Windows KB951847x86. Any help on this?     Thanks... tagtopkid

  ragtopkid,
  Take a look at this article as it addresses the issue.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• Unable to install the update to windows? 0x800A01AE & 0 x 080070570

  Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/910359

  Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

  1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
  2. Rename the Catroot2 folder.

     Note Do not follow this step if you are using Microsoft Windows 2000.

     To rename the Catroot2 folder, follow these steps:

     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        
        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

     Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  3. Rename the folder "C:\Windows\SoftwareDistribution":
     1. Click Start, click run, type %any, and then click OK.
     2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
     3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
  4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
  5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• KB2619340 and KB2596843 fails to install. I installed the last two Windows updates repeatedly, but they do not have to install correctly.

  Original title: KB2619340 fails to install.

  I installed the two recent Windows updates, the KB2619340 and the KB2596843 several times, but they do not have to install correctly.  I am running WinXP SP3.  Anyone know why?

  Hello

  You receive an error message? If so, then post back the exact error message.

  Step 1: Run the following article fixit tool and check.

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Step 2: Download updates from the Microsoft Download Center and install it.

  http://www.Microsoft.com/download/en/details.aspx?ID=28469

  http://www.Microsoft.com/download/en/details.aspx?ID=28530

  For more information about updates:

  MS11-092: Description of the update of security for Windows XP Edition Media Center 2005: 13 December 2011
  http://support.Microsoft.com/kb/2619340

  MS11-094: Description of the update of security for the Microsoft Office for Word and Excel Compatibility Pack file PowerPoint 2007: 13 Formats December 2011
  http://support.Microsoft.com/kb/2596843

• How to install the theme for Windows XP Professional

  How to install the theme for Windows XP Professional?

  Hi Shubham,

  The Microsoft Download Center a lot of themes, or you can use your favorite search engine to search the Web for more themes of third-party websites.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can consult the following articles:

  Make Windows XP as you wish

  Resources to configure desktop themes in Windows XP

  Create your own desktop theme

• Recently installed the version of Windows Media Player, 11.0.5721.5280 and now whenever I play a piece PC stutters on audio producing a constant noise and freezes. Help, please!

  Recently installed the version of Windows Media Player, 11.0.5721.5280 and now whenever I play a piece PC stutters on audio producing a constant noise and freezes. Help, please!

  I suggest that you try to update the audio drivers to their latest version. Don't simply check Windows Update, but the site of the manufacturer of the sound card as well.

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Error code 800F081F while trying to install the update to windows security

  I have to install updates in order to renew my soft security on my laptop but whenever I try to install the updates to windows, I get an error code. It's 800F081F and I can't understand what this means or what I need to do to correct the problem. If anyone can help me, I would really appreciate it!

  Thank you!

  source CBS_E_SOURCE_MISSING 0x800f081F for unsuccessful package or file not found, ResolveSource()

  Clear your Temp File/Cache first upward.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  http://www.WinHelp.us/index.php/Windows/enhancing-Windows-performance/free-up-disk-space-in-Windows.html>

  Better and easier to use - CCleaner.

  Download the basic build (slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821>

  If the system update tool does not resolve the problem, you will need repair Windows.

  UTC/GMT is 15:34 Wednesday, June 13, 2012

• I get error code 802000D when I install the updates of windows. How can I fix this error?

  I get error code 802000D when I install the updates of windows. What this mean and how can I solve this problem? Please answer. Thank you.

  Hello

  ·         Did you change your computer before this problem?

  I suggest to reset the Windows Update components and check if it works.

  See article:

  http://support.Microsoft.com/kb/971058

• Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  I suggest that you run the Microsoft Genuine Advantage diagnostic tool in normal mode (not safe mode) and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.