Install two grid in the sam Server

Similar Questions

• Having two repositories on the same server of BI

  Hello
  is it possible to have two repositories on the same server of BI and submission Service that allows to feed two repositories in different areas?
  
  Concerning

  Hello.

  merging two repositories...
  Check these...

  http://oraclebizint.WordPress.com/2008/03/27/Oracle-BI-EE-101332-multi-user-development-of-repositories-mud/
  http://oraclebizint.WordPress.com/2008/03/24/Oracle-BI-EE-101332-merging-repositories-substitute-for-import-from-repository-2-way-merge-with-no-parent-part-2/
  http://oraclebizint.WordPress.com/2007/11/22/Oracle-BI-EE-101332-merging-repositories/

• Install ColdFusion 11 on the same server as the old versions

  I know that its possible to install multiple versions of CF on the same server.

  However, it is possible to have more than one version uses IIS instead of the built-in web CF Server?  If so, how do I configure this?

  Thanks in advance!

  You have three sites in IIS viz, Site1, Site2, and training3. Try the following as an example: -.

  1. Navigate to \ColdFusion11\cfusion\runtime\bin\ and run wsconfig.exe. In the list of IIS Web sites, select Site1 . Click OK
  2. Similarly, you can browse to\ColdFusion8\runtime\bin\ and launching wsconfig.exe. In the list of IIS Web sites, select Site2 . Click OK
  3. Navigate to \ColdFusion11\cfusion\runtime\bin\ and run wsconfig.exe. In the list of IIS Web sites, select training3 . Click OK

  So now you have Site1 and training3 configured with ColdFusion 11 and Site2 configured with ColdFusion 8.

  Hope this helps

  Kind regards

  Anit Kumar

• Two versions on the same server

  Hello
  
  Can I have 2 versions of oracle database installed on the same server by a user on AIX as on windows.
  
  We currently have installed oracle 10.2.0.4.0 on the AIX server, we can install oracle 11 g 2 on the same server under user, and both versions will be used.
  
  How to manage the user profile with 2 versions of oracle on AIX and Windows how to handle.
  
  
  Thank you

  Hello

  As Paul mention possible. I have 11 and 1 11.2 10.2 database on the same server to the different path with the same user.

  Please read:
  http://docs.Oracle.com/CD/B10500_01/EM.920/a96697/MOH.htm
  http://docs.Oracle.com/CD/B12037_01/EM.101/b12140/3_oui_oracle_homes.htm#i1005615
  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:10236120188495
  http://docs.Oracle.com/CD/B10501_01/win.920/a95490/orahome.htm

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• Possible to install two languages of the same version of the application?

  Currently, I'm more interested with InDesign, but the question could be relevant to other software as well. I'm more effective when the interface is in English, but I need features available only in the Japanese version for some documents (a vertical text, in particular). Currently I have CS6 Japanese and English CC2015 installed and which works very well (in fact, sometimes I have both running at the same time, and they have not crushed), but if I start working on a document in CC and then realize I need Japanese features, I can't go back to CS6. So I was wondering if I can get English CC and CC Japanese at the same time.

  You can not CC English and Japanese CC at the same time on the same computer. You can uninstall and reinstall in the other language.

• How to: installing vsphere Hypervisor on the same server I want to virtualize

  Hi all

  Sorry if this question is answered somewhere else.  I've searched high and low and that you can't find an answer.

  I have a physical server I want to virtualize and preparation for some additional virtual servers.  I installed the converter, but it seems to an existing VMware host to copy the image.  ... and since I can't install hypervisor until the virtual image is taken, I'm stuck... Can someone tell me what is the best way to do this?

  Thank you in advance.

  Shane.

  I would setup vConverter on the machine that has enough space to hold a copy of this server.

  1 Select the Type of Source powered on the machine.

  2. Select the type of Destination such as Vmware Workstation.

  3. install the hypervisor.

  4. run Vceonerter new Select Source as Vmware Workstation or other virtual machines.

  5 Desitnation Vmware virtual machine infrastructure.

  Make sure that you have a backup of the physical server.

• Two sources on the same server db

  Hello
  
  I already have a replication (DB1 to DB2).
  On a single server, I have a new (DB2) databases to replicate
  a new database on another server (DB4),
  as below:
  

  Server1     server2
  DB1   --->    DB3
  DB2   --->    DB4

  Can I use a distribution (directory) to ogg
  or I have to create a new directory (with delivery)
  for this new replication?
  
  Thanks for your advice

  You can have the Manager running against two databases.

  For each database, you will need a user of GoldenGate database.

  If you want to keep things separate, there is no problem having a total of four distinct GoldenGate facilities, each with its own process manager. (this is the direction I would take)

  The footprint of the installation is not that big, more:

  s ' there is a problem between 1 and 3, 2 and 4 will not suffer (and vice versa)
  -If you need to upgrade a pair of databases, the other two will not be affected
  -You can have different political purge between 1/2 and 3/4

• More of a caches(expiry-delay) on the same server for consistency?

  I have a requirement to have two caches in the same server. A delay expires within 60 days and the other with 3 minutes. Is this possible? Please post sample coherence-cache - config.xml and tangosol-coherence - override.xml

  Hello

  It is easily possible to have parameters of different expiry for each of your caches and there are a few ways to do this. You only need to put the configuration in the configuration of the cache file, you don't need to touch the override file.

  The simplest solution is to use different cache with init-params mappings

  
  
  
      
  
          
              cache-one
              sample-scheme
              
                  
                      expiry-time
                      60d
                  
              
          
  
          
              cache-two
              sample-scheme
              
                  
                      expiry-time
                      3m
                  
              
          
  
      
  
      
  
          
              example-distributed
              DistributedCache
              
                  
                      {expiry-time 0}
                  
              
              true
          
  
      
  
  

  So, while that the example above shows how you can pass different parameters for different caches to the regime hiding the example won't work en your condition. The problem is that it is not possible to set a time-out on a cache that is greater than 24 days. That's because consistency keeps the value as an integer (don't ask me why) so he can no longer hold to Integer.MAX_VALUE (2147483647) milliseconds or about 24 days.

  An approach to define a longer maturity is to use the cache.put () method that takes a key, the value of time...

  cache.put(key, value, Base.parseTime("60d"));
  

  .. .well obviously will not if no code does not follow this model to update the cache.

  You could become more complicated and has a custom implementation of a support card that you use for the local cache that would allow the time of expiration for 24 days.

  JK

• After installing iOS 9.3.3 two iphones on the same apple ID are evidence of the other device call log.

  I use two iphones on the same apple ID. After installing ios 9.3.3 two iphones show the other call log also. In my view, that is a bug in ios9.3.3, because this problem started after the new ios.

  No this is by design, and it was not introduced with 9.3.3 much earlier

• Possible to install UCCE on the same server as CallManager MCS

  Hello

  Trying to set up improved 4.5 on an MCS 7835 UCCE. Now, if I want to install CallManager 5.1 in this environment, can I put the same box of MCS? Or do I have to buy an another MCS?

  Thanks in advance.

  Juan, I think that you misread his post.

  "If I changed CallManager express to 4.2 then it would be possible to run on the same server MCS?

  I don't think that he meant "CallManager express."

  The solution, lpezi, is to read the compatibility matrix where all your questions are answered.

  http://www.Cisco.com/univercd/CC/TD/doc/product/voice/sw_ap_to/crscomtx.PDF

  Kind regards

  Geoff

• How to have two copies of the same program to install on WIndows 7 and on the desktop

  «"" "Dear help forum:»»"»

  I am new to WIndows 7, but just have not found the right research
  How to get my answer from Microsoft/Windows 7 basic knowledge.

  I have two programs. There are two versions of the same program
  ('LACE') One is the version 4.0.1, and the other is Version 4.0.6.

  I wish I had one old continue to run (using a purchased
  Product key which I own and have for years).

  BUT there is a problem. The old and new programs are the
  same 'setup.exe '? Download 124 MB each. There are small but
  many corrections and changes in the new program, I am told, but
  they do not have add up to change the size in MB of the program.

  SO I'm in trouble when I'm trying to download the program, as
  It seems to be in WIndows 7, a small program that removes the
  size of the incoming download and informed me that I can not download
  a new that I have already one of this program is installed in the
  computer!

  He asks me if I want to "Uninstall" the previous version and then replace
  It is with a new one. I can't cancel the old version because she had a
  Product key that was told to me in the instructions that he could
  only be used 'once', to uninstall the program won't help
  me as I won't be able to continue to use this program once again, as the
  registration code could only be used once.

  I have a purchased code new, different program version 4.0.6.

  Is this a problem with WIndows 7? I already called/sent the
  company and they have no help and no solution for how these two programs
  are to run on the same computer at the same time.

  Can you please help me and provide instructions on how I load
  This program of "LACE" most recent second size 124 MB and even download
  name in the computer (replacing the automated duplicate program
  prevention installer routine), so I can have and use two copies of
  This program on the computer at the same time?

  During the creation of this issue, I had an idea of what will happen if I created a
  second Downloaded Programs folder to contain the program setup.exe inside
  and try the operation or the opening of this place. He did not like
  the program checked the computer for the first copies of the
  LACE and identified, he was always present in the computer and asked
  Once again if I wanted to remove it.

  Thank you very much!

  If this program is not designed for the execution of the two copies on a single installation of Windows, then you simply can't do.  No ifs, ANDS or goals.  You have never been able to do with any version of Windows, and apparently the creators of this program thinks there is no reason to do so, then you'll just have to choose one version or another.  I'm not familiar with the lace, but more recent versions programs usually include most of the older features while adding the most recent.  They sometimes make us learn new ways of doing things that make us less happy, but I'm afraid that's life in the world of computing.

  That said, I must mention that there may be alternatives that you might continue even if they are less obvious than what you suggested.  If you have the professional version or full edition of Windows, you can get XP mode free you can start Windows 7.  It normally happens in 15 to 30 seconds and you could install and run another version of your program under that.  If you do not either of these versions, you can invest in the Anytime Upgrade and do it available.  Upgrade Home Premium to professional is $ 90.

  The other alternative would be a dual-boot configuration where you could have two versions of Windows in separate partitions, so when you start your computer, you can select the one with the version of your program you want.  I think that the choice of the XP mode would be preferable because it would be so much easier to use, but these two options are available, if you want to continue.

  Good luck.

• PowerCLI and vCLI - install both on the same server

  Hello

  Probably a stupid question, but I vCLI installed on the server vCenter Server (necessary for a health script that is running)

  Can I install powercli on the same server and use powergui etc. ?

  See you soon

  When your environment is locked, you of course have to execute scripts on the vCenter.

  It's a trade-off between security, ease of use and potential risks.

  But each site must make their own environment analysis

• How can I create a cluster of two instances that are running on the same server?

  Hello
  I can't find how to create a cluster or even a rule of failover for my two instances that are running on the same server ODSEE 11 GR 1 material.
  Could you please help?
  
  Thank you

  Hello
  Clustering (intended as Sun Cluster, Veritas Cluster, etc...) IS NOT supported since 7.0:

  http://docs.Oracle.com/CD/E20295_01/PDF/821-1216.PDF [page 20]

  and, according to my own experience, is the WORST way to achieve high availability of Service LDAP directory and in a way almost CONCEDED for replication problems in your topology (lock, split, re-init, etc...).

  Please use the "application level" collection that you get out of the box with the multimaster replication.

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1217/index.html

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1220/fhkry.html#scrolltoc

  HTH,
  Marco

• install esxi 4.1 and the data store on the same server

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL says:

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL,

  Can you give us more details about your current environment?  What is the size and the data store space used? Do you have any storage of additional network attached to the host (for backup purposes)?

  My assumptions of your post do you have 1 stand-alone host with ESXi 4.1 aready installed and you also have a local data store on the same host, but you want to re - install ESXi 4.1 while keeping the contents fo the data store.  Is this correct?

• How to install the new database on the same server peoplesoft

  Hi people,
  
  I have the people tools 8.52 and financial 9.1 on my windows 2008 server where I use my database in ms SQL Server 2008 R2.we created a demo base data and configured PIA which works very well.
  
  Suppose if I want to create two databases more in the same server for different environments, which is the best way to do it?
  
  should I just create two databases in sql server and run scripts as utlspace.sql, fcddl.sql, dbowner.sql... like that then create new domain in with psadmin and areas Web servers application servers?
  
  or
  
  I should run PS_HOME\setup\PsMpDbInstall command, and then create database system etc etc?
  
  
  Please let me know for any information on this topic.

  Hello

  As Nevin said, both do the same thing, another automatic manual.

  If you choose to use PsMpDbInstall, to choose Assistant option existing Create database on the server instead of set up a server and create a database

  I prefer to run the scripts manually, that gives me more control and view the measures taken, but it is a personal choice.

  Halin