PowerCLI and vCLI - install both on the same server

Similar Questions

• Kodak ESPC310 + 0365 and Sony Vaio both on the same wireless network, Vaio says printer offline, so don't not printing - suggestions?

  Kodak ESPC310 + 0365 and Sony Vaio, printing problem

  Kodak ESPC310 + 0365 and Sony Vaio both on the same wireless network, Vaio says printer offline, so don't not printing - suggestions?

  Hello

  ·         What operating system do you use?

  ·         Remember to proceed with changes in hardware or software on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the fixit tool and check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Follow the steps in troubleshooting section and check if that helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

   

  http://support.en.kodak.com/app/answers/detail/A_ID/19500/selected/true

   

  http://support.en.kodak.com/app/answers/detail/A_ID/1329/selected/true

• Installation of TEST and Dev or screw in the same server

  Hello
  
  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  
  anyone tried similar installation?
  
  Thank you

  Hi user;

  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  anyone tried similar installation?

  You can do this, I have already R11 and R12 and R12.1.1 on the same server. The main problem here is your server can handle all your instance on this subject, you may have a performance problem but thatsall.

  Either way, I suggest take oraInst.loc, oraInventory oratab file under/etc and and also create new user (applmgr-oramgr) of your new system

  Respect of
  HELIOS

• Can the ESXI 5.0 and Vmware View coexist on the same server blade

  Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?

  Kind regards

  Ismail

  VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.

• Possible to install UCCE on the same server as CallManager MCS

  Hello

  Trying to set up improved 4.5 on an MCS 7835 UCCE. Now, if I want to install CallManager 5.1 in this environment, can I put the same box of MCS? Or do I have to buy an another MCS?

  Thanks in advance.

  Juan, I think that you misread his post.

  "If I changed CallManager express to 4.2 then it would be possible to run on the same server MCS?

  I don't think that he meant "CallManager express."

  The solution, lpezi, is to read the compatibility matrix where all your questions are answered.

  http://www.Cisco.com/univercd/CC/TD/doc/product/voice/sw_ap_to/crscomtx.PDF

  Kind regards

  Geoff

• Restore the backup with a new name and a different location on the same server

  Hi all
  
  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  PRM says:
  Hi all

  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  If you use RMAN my awnser is not.

  You cannot change the name of the database before open resetlog.

  But you can make this work without problem using the same server.

  You will need to change some parameters.

  Create a PFILE from SPFILE (prod) change parameter 'db_unique_name' file new name (ex TEST).

  Change all the value of PROD TEST except db_name parameter must be PROD.

  CREATE a SPFILE from this PFILE (spfileTEST.ora)
  Create a new password file (orapwTEST)

  So you can start this new Instance_name (TEST).

  Restore the PROD to TEST instance database, you will need use set new name to the file data or database (depends on which version you use)

  Retrieve the instance PROD database (TEST)

  It is time to open resetlogs...
  !!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION HERE!

  You need change redo log location before open resetlogs, you must query v$ logfile member column and change it to another location.

  After change you can open resetlog.

  Now its time to change name of database.

  Stop and start Mount

  Use the NEST

  NEST target=sys/password@instance DBNAME = TEST

  When this process is complete, NEST will be closing database.

  So you will need to start with nmount change db_name to the TEST and reset the parameter 'db_unique_name' (alter system reset db_unique_name)

  Then stop and start upstairs question OPEN DATABASE RESETLOGS and is done.

  HTH,
  Levi Pereira

  Published by: Levi Pereira on August 27, 2012 13:09

• IF and Else running both at the same time.

  Hello world

  I have a strange problem underneath the small piece of code, both if and other blocks are run at the same time.

  Kindly advise on this strange behavior.

  DECLARE

  p_year varchar2 (4): = 9999;

  BEGIN

  FOR I IN (SELECT lookup_code FROM fnd_lookup_values, meaning)

  WHERE lookup_type = 'PARALLEL_ALLOCATION')

  loop

  DBMS_OUTPUT. Put_line(i.Meaning ||) e -'|| i.lookup_code);

  IF i.meaning = THEN p_year

  DBMS_OUTPUT. Put_line ("year values now");

  DBMS_OUTPUT. Put_line(i.Meaning ||) e -'|| p_year);

  on the other

  DBMS_OUTPUT. Put_line (' year values in other ');

  DBMS_OUTPUT. Put_line(i.Meaning ||) e -'|| p_year);

  end if;

  end loop;

  END;

  /

  OUTPUT-

  9999 2012

  Now the values of the year

  9999 9999

  8888 2016

  Values of the year in the world

  8888-9999

  Select used in for loop is to have two values only i.e.

  sense lookup_code

  9999 2012

  8888 2016

  Expected results should be in part IF that is and on the other hand does not run.

  9999 and 2012 of DBMS_OUTPUT

  Nope...

  If you compare 8888 with 9999, it means that this condition is false (it is not true)...

  It will be ignored... in your case... (nothing will happen)

  You can also change your query... so, you can select just the data in your table when meaning is equal to a number...

  SELECT meaning, lookup_code FROM fnd_lookup_values
           WHERE lookup_type = 'PARALLEL_ALLOCATION'
  and meaning = p_year
  

  but... These are really programming basics...

• Root and CA certificate both are the same?

  Hi all
  Can someone help us in understanding root and ca that are the same?
  
  
  keytool - genkey-alias kumar-keyalg RSA - keystore keystore.jks (key file created)
  
  keytool - certreq-alias "kumar" - keystore keystore.jks - file domain.csr (CSR creation)
  
  keytool-import - trustcacerts - kumar - Thawte.crt - keystore keystore.jks file
  
  After that we are faced with an error "could not establish the response string.
  
  Next I m going to have to do this
  keytool-import-trustcacerts-alias kumar - mytrustedcert.crt - keystore keystore.jks file
  
  
  Please help me why I get the error
  Please check the alias clearly (do we need to use the only one even)
  
  Concerning
  Vermorel

  Hi vermorel,.

  You use the same alias while creating a private key in the keystore (keytool - genkey), create a certificate request (keytool - certreq) and import the signed certificate (sent by CA) (keytool-import) in key file.

  According to you, if we create an alias differerent while the import of a certification authority and signed cer (ex: alias for CA cert and alias b for cert signed) then what alias will be to provide the host TP... ?

  You must use alias b (cert signed alias or aliases private key)

  If they gave only a cert then wat we will share with amount of trading?

  You must share the corresponding public cert of your private key.

  We submitted the CSR to get out the cert team and they gave that a cert which includes CA, is that enough or do we have to ask ourselves another certificate also?

  Your cert team to provide you with a signed certificate and one (or two) of CA certificates. You must first import Cert CA (root and intermediate CA) and then import the signed CSR.

  Kind regards
  Anuj

• blazeDS and 2 independent tomcats on the same server

  Hello

  On the same machine that I use two tomcat server. The two Tomcat have the same web application with BlazeDS, but with different parameters.

  I noticed that the Flex application always communicate with blazeds the first that was started. services - config.xml contains a different url for both apps...

  How is that possible?

  Thanks in advance!

  Olive

  The root of the server, port, and the context are defined when you create the Flash Builder project.  They exist in the project properties, and can be adjusted by selecting Project/Properties/Flex Server in the menu bar.  The same properties dialog box is available via click RMB on the project in the package Explorer.

  FB allows only a single server/context by project sheet.  You can programmatically create your channelsets to access multiple servers, however.

• CSA 5.1 and 6.0 MC on the same server

  Hello

  Anyone know if there are problems with enforcement MC 5,1 CSA and CSA MC 6.0 on the same Windows 2003 Server?

  Are their questions with them in writing to the same database?

  I'll have to upgrade the 200 server operating system to SP2, so I hope that this does not affect the existing MC 5,1 and Agents 5.1 who still use the MC 5,1

  It's actually a secanario of migration it should work fine. I had no problem with 5.2 and 6.0 on the same system.

  Tom

• Database Oracle and VirtualCenter 5.0 on the same server?

  We have 11 ESXi host and whant to install Oracle R2 on the VirtualCenter 5.0 server.

  VirtialCenter 5.0 and Oracle will bee installed on a virtual machine.

  The virtual machine will have 4 vCPU´s 2 GHz each and 8 GB of RAM.

  So my question is:

  Is - this senario ok, or do I have TO install Oracle on a separate server?

  Hello

  You can use Oracle as the database for vCenter Server 5.0 and is therefore capable of managing all your ESXi hosts - all 11 of them. This means that you need to install Oracle on your virtual machine where you plan to install the vCenter Server 5.0 and when it asks for the select Oracle database. See the installation guide for vCenter Server 5.0.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2003790

  Kind regards

  Nikhil

• ESX4.0 lost connection and impossible to reconnect to the same server

  Three virtual machines is is stuck on one of my ESX Server 4.0, no was not able to close the same then I restarted the service management of vmware for the same order.

  restart of #/etc/init.d/mgmt-vmware; chkconfig mgmt-vmware on

  Now, I've lost the connection to my server ESX 4.0 and when I m trying to reconnect it gives me out of "time" error

  What should I do to fix the error?

  Concerning

  v

  I know that the article is for esx 3.5 but it might be useful to have a quick glance at the Article KB VMware: 1005566

  If you found this helpful, please consider awarding points

• I'm not able to install both on the same PC LabVIEW applications. I have uninstall the first application in order to install the second. Is there a way to avoid this?

  I wrote two LabVIEW applications. The first acquires data from three different devices, displays the data and writes it to a file. The second application reads the data and displays it on the screen.

  Can I install the first application and run it, but I can only install the second application if I uninstall the first application.

  Any ideas as to why this is happening?

  You install applications by using a Setup program created with the application builder to LV?

  What LV version do you use?

  You have a dedicated for each installer build script, or do you still want to change the settings of a single build script (which would be a reason for this behavior!)?

  hope this helps,

  Norbert

• Cannot turn off the issue of jam and paper cartridge (both at the same time)

  I have a HP Officejet 8600, running on a wireless home network.  The printer will not work.  We get two messages. 1. Introduction to jam, and I'm going through all the steps to clear paper, including the search for pieces of paper, as well as any leaves.  I found no paper, whole or in part anywhere in the printer.  2. at this point, I get a message that I have a problem with a printer (of ink, installed correctly, etc.) cartridge.  Simply replace us all cartridges, so I know that we are not out of ink.  However, when I opened the door to the area of printer cartridge, the cartridge does not move where I can check it out.  There's just right.  So I'm "stuck".  I don't know how to get the cartridge door to roll over so I can check!  I turned off the computer several times and tried to reset things, but nothing seems to work.  Any suggestions?

  Followed - I turned off the printer.  Then opened the cartridge and reaches into the printer access door.  Without moving the cartridge door, I pressed each cartridge to make sure it was placed correctly.  Then, shut the door and back running the printer.  The printer seems to start correctly.  I then opened the door, the door-cartridge moved where I could access them normally.  I double checked that each cartridge is installed and closed the door.

  At this point, everything seems to work properly.

• PE 10 and first Pro CC on the same PC?

  I think to go to Premiere Pro CC of first 10 items. I'm in PE 10 on Windows 7, 64 bit, 16 GB of RAM, Intel i7-3820 CPU @ 3.60 GHz. I'll always be able to open and use 10 PE after I have download and run software PP CC CC? A few years ago, I improved EP 1 EP 10 and found that I was no longer able to open 1 PE, nor I was able to load one of my PE 1 projects in PE 10. If possible, I'd like to be able to run two 10 PE and PP CC on the same desktop

  geozucco

  First items 10 and first Pro CC are stand-alone programs.

  Although I have not tried first-hand, I'm pretty sure that you can install both on the same computer and use one at a time. But you can do better than my speculation, you can download and install the first Pro CC tryout and determine how it behaves in your IT environment.

  Based on Supported Import Formats, I do not see you open a first Pro CC project file to the first 10 Windows elements.

  And I have doubts about opening a file of Premiere elements 10 Windows (PREL) project in first Pro CC Windows. According to the CC Pro first Supported import Formats, it is possible. But a current thread suggests otherwise.

  https://helpx.Adobe.com/Premiere-Pro/using/supported-file-formats.html#supported%20video%2 0project % 20file % 20formats

  Please see the file ReadMe 10 items first

  Adobe Premiere Elements help. Readme file. Adobe Premiere Elements 10.0

  RTA