Install win 2008 64 to a virtual CD/DVD 2950 (DRAC)

Similar Questions

• I want to install Win 8 home in a Virtual Machine

  I intend to install the OS on a Mac, but the MS download site only allows you to download a setup.exe file and not the file ISO integer required by the virtual machine. How can I get a full installation file? I bought the software for download on the store and do not want to buy a DVD version. Can anyone help?

  You need the full version if you plan to install on a virtual machine:

  There is no full retail version of Windows 8. If you need a full version, you will need to purchase the Pro OEM Windows 8 of new eggs. To do this, install an own custom.

  Windows 8 Pro
  64-bit (OEM)

  Windows 8 Pro
  32-bit (OEM)

  Windows 8
  64-bit (OEM)

  Windows 8
  32-bit (OEM)

• Win 2008 x 64 guest OS does not recognize x 64 processor

  My host system is Windows 2003 x 64 standard running on 2 quad intel EM64T processors. I am running VMWare Server 2 (latest version) and reports processors as "Intel (r) Xeon E5405 @ 2.00 GHz - 2 x 4 cores of CPU processors". When I run "VMware-guest64check - 5.5.0 - 18463.exe" he reports "the host is capable of running an operating system to 64 bit comments under this product VMWARE." but when I install Win 2008 x 64 standard after installation when it restarts it comes up with an error indicating "" Info: attempt to load a 64-bit application, however this CPU is not compatible with 64-bit mode. "the message is coming from the boot of Win 2008 Manager but I do not know why." Anyone else know?

  ?:|

  Thank you

  Dwayne

  Welcome to the forums.

  You have Intel virtualization technology setting enabled in the system BIOS?

  You will need to run 64-bit guests.

  Then enter your bios and enable the setting.

  Then turn the system completely so that the settings take effect.

  Then turn on your system a turn to your installation.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• Satellite A300D-15B with driver Vista 32-bit for Win 2008 possible?

  Hi all

  I have a laptop A300D-15B, and recently I have installed Win 2008 (32 bit) and installed the Vista 32-bit drivers worked like dream. But when I install the card reader (O2) it crashes (blue screen)?

  has any one face this problem?

  any help?

  Thanks in advance

  concerning
  Ganesh

  > But when I install the card reader (O2) it crashes (blue screen)?
  Looks like this Vista driver is not fully compatible with Win 2008 Server and therefore you receive and BSOD

  Seems you have to use this operating system without this special driver

• While Installing Win Server 2008 R2 error: 80070017 x 0 & 0 x 80070241

  While Installing Win Server 2008 R2 error: 80070017 x 0 & 0 x 80070241

  Please repost your request in one of the most appropriate Microsoft Windows Server Forums, thank you!

• KB2449741 not can not install with an error code: 80092004 in ser Win 2008 R2 Enterprise (RTM)

  KB2449741 not can not install with an error code: 80092004 in ser Win 2008 R2 Enterprise (RTM)

  Hello Muneswar M.

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum. You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/categories

• A new system with a clean install of Win 7 64 bit Pro. Try to install win XP virtual machine.

  A new system with a clean install of Win 7 64 bit Pro.  Try to install win XP virtual machine. The virtual machine "put" file installs and then restarts.  During the configuration phase it reboots it gets 94% done gives a message 'update failed' and said that no files have been modified.  I redownlaoded the file and reinstalled several times.  I changed the bios to make sure that hardware virtualization is enabled.  All tests that microsft has said that my Machine is fine.  However I can not get the software\update of the virtual machine in order to install properly.  Any thoughts?  Thanks in advance.  Bruce

  Hi Bruce,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

   

  Hope this information helps.

• Win 2008 Server iSCSI San installation

  Hi, Im trying to install win server 2008 on a discovered iscsi lun. To do that I need to load my kmdf basic bus driver and one pilot iscsi initiator additional in order to discover the LUNs during installation.

  Win 2008 has 1.7 kmdf library by default. So to install 1.9 kmdf library in it, I added the Windows6 package. 0-KB970158 - x 86 .cab in the install.wim file. With this, the installation is complete. But when the operating system starts for the first time, my bus kmdf driver does not load completely. Only the Driverentry routine is called. EvtAddDevice routine is not called. So, accordingly, I see a BSOD saying that boot partition not found. Any kind of suspicion would be useful.

  This forum is for Vista.  I suggest you use the Technet Windows Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• When install win vista family premium 32 with sp1 with any victory at time on a new os hd level is instlled ok but when sp1 installs it freezes

  freezesistalling on a new os installed hd ok sp1 vista freezes causingimproper install

  When install win vista family premium 32 with sp1 with any victory at time on a new os hd level is instlled ok but when sp1 installs it freezes causing no adequate facilities

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• WHILE the error is absent INSTALL WIN 7 I AM facing ISSUE is to say--a required cd/dvd drive device driver

  Hello Sir

  I recently brought lenovo s20 nootbook laptop with win8.1. now I want to change it for win 7 but at the start of the process, I am faced with the question IE a required cd/dvd drive device driver is missing error.

  Hi Kothalanka,

  We are there to answer your concern about the installation process of Windows 7 .

  Here are the following reasons why a required CD/DVD drive device driver is missing error message occurs:

  • The installation DVD is removed during the installation process.
  • A bad quality DVD has been used to create the installation DVD.
  • The speed at which the installation DVD is burnt was too fast.
  • The DVD drive cannot read media.
  • The ISO file is corrupted.

  To resolve your concern, we suggest you use one of the following methods, depending on your situation:

  • Burn the DVD to install at a slower speed.
  • Best DVD quality to create the installation DVD.
  • Update BIOS firmware for your DVD player.
  • Windows 7 USB/DVD Download tool allows you to create a bootable USB key and then use the USB flash drive to install Windows.

  If you still encounter the same error after doing one of the above resolution, here are a few troubleshooting methods that you can do:

  • Run the DVD on another computer to determine if the DVD works properly.
  • Test your DVD player using a Windows installation DVD official.
  • Attach the ISO file to a virtual machine to verify if it is corrupted.

  For more information on how to resolve the error a required CD/DVD drive device driver is missing , click here.

  Do not forget to back up your files by using a storage device externally (for example USB, external HARD drive) before installing Windows 7 , in order to avoid any possible data loss.

  Let us know how it goes.

  Kind regards.

  You can use the mark as answer button, if this post responds to your request.

• Impossible to install Windows 2008 on a Netapp LUN

  The blade is using the M81KR adapter. Logic unit number appears during startup. I boot with Win 2008 - iso image using a virtualDVD-ROM. I then cancel the ISO mapping and map the UCS for M81KR for Windows 2008 drivers. Then he said the LUN is currently offline and it let's online me it. But then, he always says that he is not available for installation. The message is attached. What I am doing wrong? With the help of 2.0(1m) of the Complutense University of MADRID.

  Atle,

  When you start the server, the KVM go in BIOS options 'F2', go to Boot Options and disable the startup option 'EFI '.  Save the settings, then try to install Windows.  Let us know the results.

  Robert

• Install Server 2008 r2 with windows 7 64 bit

  Hi all
  I have laptop with Windows 7 Home Premium HP g6, and I hope to install Server 2008 r2.
  Is it possible to have two OS on a machine?

  I have a little experience and can create a virtual hard drive inside the dossier of documents of windows 7.

  There are already 4 primary partitions on the HARD drive, the windows, the HP recovery image and another small partition.

  Help, please.

  You can install Windows Server 2008 R2 on another partition.

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• Oracle 10g 32-bit (win 2003) to Oracle 11 g 64-bit (Win 2008)

  Hello
  
  I am a beginner on Oracle DB side. I have 2 Windows servers
  
  "Win Server A - current Prod" whose configuration is as follows
  
  O / s: win 2003 R2 sp2 (32-bit o/s)
  Oracle DB: 10.2.0.4 32bits
  DB Dimensions: 50 GB
  NLS_CHARACTERSET: AL32UTF8
  
  
  "Win Server B - to be new Prod" whose configuration is the following
  O / s: win 2008 R2 sp1 (64-bit o/s)
  Installation 11.2.0.3 planning software 64-bit db
  NLS_CHARACTERSET: AL32UTF8
  
  
  I need to move/migration/upgrade my db 10g and 11g db on the latest version of win o/s on ServerB.
  
  What are the options I have for db upgrade? After a little research on Google I did, it is what I found
  
  (1) OPTION 1: install 11.2.0.3 software on server B, create empty db, then take datapump exp of patterns non-system (from 10 g) and import it on 11 g
  (2) OPTION 2: do something through clone RMAN... not 100% sure how it works and what great advantage I have is going to get compared to OPTION 1
  (3) OPTION 3: install 10.2.0.1 on 'ServerB', upgrade to 10.2.0.4 via the Group of hotfixes. Then using the upgrade database Wizard, perform an upgrade of 10.2.04 to 11.2.0.3. I don't know if 10.2.0.4 is compatible with Win 2008 R2 SP1.
  
  Option 3 is seems to be safer and better.
  
  Can someone give me some advice, metalink not. who can put me on the right track. NLS_Characterset remains the same.
  
  Would there be a problem due to the fact that 10g we use is 32 bit and we would go to 64-bit Oracle.
  
  Concerning
  
  Learner

  The simplest option uses the Data Pump utilities.

  If your application uses only some of the schema, export/import only those schema.

  Please do it on a test first, configuration so that you can test the connection and the behavior of applications.

  Thank you.

• sequential writing very slow use SAS 6/iR (LSI 1068E) and readers of SAS 15 k RPM on ESXi, run fast on a native installation of Win 2008

  Hi gentlemen,

  I'm having a problem on a Dell PowerEdge 2950 (quad core 2.66 ghz, 18 GB of ram) with my SAS drives with a very low write speed. The tests ran inside a virtual Windows XP machine using virtual thick 32 GB drive. I tried a single seagate 15 k RPM 500 GB and got 26 MB s, 2 of them in raid-0 and still got dry 26 MB, then I tried a different SAS 2.5 inch 10 k rpm HP and still got the same s 26MB.

  This controller is a hardware raid, not the best around, but it's good for raid 1 and 0. Then I took off of ESXi machine and installed Windows 2008 re-usable. The disc written now 100 MB s sequentially on disk and using software raid 0 is 145 MB s. I'll configure hardware raid 0 tomorrow on Windows 2008 to check if the writing is a bit better.

  But anyway, there seems to be a huge difference between a virtual machine in ESXi and a native machine running on these drives. I'll install VMware workstation on top of Windows 2008 and run tests with a virtual disk again thick.

  It's very strange that all disks are capped at 26 MB s. The reading speed is also very low in raid 0. I get on Windows 2008 340 s MB, on ESXi I get 200.

  The controller is not write far cache I have now as there is no battery on board. Can use Windows 2008 write cache on hard drives without any kind of system requirements for me? But even with or without write caching, it's so fresh generals to let fall a sequential read 340 to 200 MB on a xeon quad core with 12 MB of cache and SAS controller?

  Thank you!

  You cannot directly compare a stand-alone OS and a virtual one. There is more than just the write cache, but it can make a difference of 10 times in some environments (depending on controller, cache size, number of axes etc.).

  If you search the forums you will find many many similar positions and invariably, the answer is battery and caching module.

  http://communities.VMware.com/docs/doc-5490

  Forum upgrade notice - we will be upgrading systems VMware communities between December 10-12, 2010. During this time, the system will be placed in READ ONLY mode.

• Cannot install VMware vCenter Server on a virtual machine

  Hello world

  I'm new to the forum. I try to install the vcenter server in a virtual machine.

  Configuration of the VM: 10G VMDK, used 7G... 2G memory... guest operating system is win XP Pro.

  When I run the Setup it says:

  This installation package could not be opened!

  I have attached a JPG of the error. Can someone please!

  Kind regards.

  64 bit is not supported as a host to vCenter operating system, see the compatibility guide posted above.  I would try to mount the ISO using the client machine instead of starting from the ESX host, it could be that your DVD image is not good.