Install Windows 7 on a Netbook

Similar Questions

• How to install Windows XP on my NetBook via USB

  Can you tell me how to install Windows XP on my NetBook via USB as there is no CD to my Samsung N100 NetBook?

  Go to the Samsung's Web Site, click on the "Support" link and find/download a manual for your computer.  Somewhere in the manual (sometimes in the appendix) the procedure of installing Windows XP on your model will be explained.  However, having said all that, my bet on the response from Richard Harper and you will probably have to you beg/borrow/steal/buy an external USB CD-ROM drive.

  HTH,
  JW

• Installed Windows 7 on my netbook but keep getting the blue screen while surfing Web sites

  Hello!

  First of all, this is my first post time on these forums, I often read them and think they are great!

  Now on to my question, I recently installed Windows 7 on my LG x 110 netbook. I ran the windows Upgrade Advisor 7 and confirmed that my netbook managed to all the minimum requirements for a 32-bit install. After installing Windows 7 my pc works perfectly (better than XP in fact) has installed all of the drivers needed to run automatically unless the driver for my microphone and my 3gs integrated internet which I managed to resolve. The only problem I have is sometimes while surfing the web, I get the blue screen of death and my netbook restarts. I was not able to understand by myself am so regarding this forum hoping to repair... I contacted LG for information on downloading upgraded drivers, but got a response from them saying that my pc is not supported with drivers for windows 7. Here is some information from the Center problem with Windows 7, I don't know if it's necessary info, please tell me where to find the correct information and how to access it.

  Problemsignatur

  Information additional om problemet

  BCCode: c2

  BCP1: 00000007

  BCP2: 00001097

  BCP3: 8078AE94

  BCP4: 8078AE74

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  Bucket ID: 0xc2_7_RTL8187Se! PlatformFreeMemory + 1 b

  ServerInformation: 47840a85-d17f-4bd7-8fa5-f385071573a0

  Any help is greatly appreciated as I really want to re - install Windows XP because Windows 7 runs so well, even on a low technical specifications.

  Handelsenamn: BlueScreen

  OS version: 6.1.7600.2.0.0.256.48

  Sprakvariant-ID: 1053

  It seems that you have a C2 Bad Pool Caller error, which is difficult to analyze without the minidump file.  If you googled around and find WinDBG, you can open the minidump file.

  Look for the line: nom_image: it will tell you exactly what file has caused the error.  If all goes well, once you find exactly what caused the error, you can search for updated drivers/software.  At first glance, I would say it was the Realtek drivers because you see the line RTL8187Se in your info.

  My MSI Wind U100 netbook works also Win7 perfectly.  Double boots with MacOSX too, just because I wanted to see if I could do it.  I change the hard drive (for a bigger) and added the RAM.  Nothing low spec thereon compared to what was needed for WinXP when it came out!

  Try this driver, it should do the trick.  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PFID=40&level=5&Conn=4&ProdID=172&DownTypeID=3&GETDOWN=false&downloads=true

  And since this is the NETWORK/connection wireless card driver, he explains why the errors come during surfing!

• NX unsupported on the NB305-106 - cannot install Windows 10

  Hello
  I want to install Windows 10 on my netbook NB305-106, but I can't because the NX is not supported. How can I make NX taken care of?

  NX - Bit means "No eXecute" bit and it is a feature of CPU. It's important to be able requirement to install the system Windows 10 and as far as I know if the processor does not support the NX bit, Win 10 installation is not possible.

• I upgraded the ram and wish to have access to more than 3 GB, so I'll need to install Windows 7 64 bit

  Original title: Aero

  Yes please

  As the 32-bit drivers won't work not on Windows 7 64 bit is very important that you check that the 64-bit Windows 7 drivers are available for all your equipment (not only devices such as printers) before you upgrade. The Windows Upgrade Advisor is a useful starting point, but to be sure to look on the Web site of the manufacturer of your PC, or to defect, the manufacturer of the equipment.

  Presents a useful set of FAQS:

  http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions .

  It is possible to install Windows 7 using a flash rather than on a DVD player. Please see:

  http://windows.microsoft.com/en-US/windows7/installing-windows-7-on-a-netbook .

• How am I supposed to install windows 7 on a laptop computer that is not a hard drive

  Well, I just got Windows 7 for my laptop, but it's not a hard drive. How do I get there for free?

  Hello

  · What is the number and the model of the computer?

  · Has the operating system installed on the computer it pre-installed?

  If the operating system came pre-installed on the computer then you can contact the computer manufacturer if they provide for the free upgrade to Windows 7.

  See also the link below which has options on how to install windows 7 on a computer that has no DVD player. Link: Install Windows 7 on a netbook: http://windows.microsoft.com/en-US/windows7/installing-windows-7-on-a-netbook

• Cannot install Windows 7 error USB "Setup could not create a new partition system.

  Windows 7 install gets o Acer Aspire 5100 hard (perhaps by EzBack Pro II)

  So the problem is that I want to install windows 7 (from USB, no more details coming soon), but it gives me the error "Setup could not create a new partitiojn system or locate a system partition. See thwesetup for more information log files".

  I flashed the bios because caouldn can't EzBackPro II freaking be uninstalled on vista.

  I formatted all partitions and have now 1 x 150 GB partition (still the partition OEM.. angyr I because recovery tools did not work ~. ~)

  now I want to install windows 7 and it does not just ;/

  any help? I hope that I destroy my laptop ;/

  Hi Grasmanek,

  You can try to dollow steps and check if it helps you to difficulty of installation of Windows 7 from a USB.

  (A) have no USB stick plugged in when the computer starts.

  (B) in the configuration page that says that you can load other drivers, insert the USB key, then click on the link and load drivers.

  (C) disconnect the USB.

  (D) to continue with the installation and check if it ends well.

   

  Access the links below and make sure you follow the steps mentioned in the items to install Windows 7 from a USB key.

  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-on-a-NetBook

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install itunes later in my windows starter 7 pre-installed with my Hp mini netbook. Please suggest.

  I need to install itunes later in my netbook. It contains 45 Atom, 1 GB of RAM and windows 7 starter edition. But its showing a few errors. What I can do. Please suggest.

  Hello

  a. what error you get? Previous post the exact error message.
  b. you are able to install any other program on your computer?

  Run it with check and administrator privileges.

  Here's how:

  1. right click on the iTunes Setup file and select run as administrator.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Latest iTunes download link: http://www.apple.com/itunes/download/

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install my printer Lexmark 2500 to my Windows 7 Acer Aspire Netbook?

  How to install my printer Lexmark 2500 to my Windows 7 Acer Aspire Netbook?

  The printer came with an installation disk or driver?

  If this is not the case, try using the Vista drivers from this page:

  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2500&focusedTab=downloads#1

• HP dv7-1450us netbook: 3 base system device a missing an unknown device drivers after installing windows 8.00

  I installed windows 8 on a new clean hard drive, I'm updating with windows update but I still 4 devices missing drivers, 3 base system and an unknown device, how can I solve this problem?...

  Thanks in advance for your help.

  Hello:

  You need these drivers for the bsd...

  This package contains the driver for the JMB38X Host Controller Card Reader in laptop models supported and operating systems. JMB38X card reader supports the following types of media: SD, MS, MMC and xD.

  File name: sp45180.exe

  You probably need this driver for the unknown dev...

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• Hi, I have hp mini 110 netbook do you 3601, I slip stream its sata drivers and install Windows xp, help!

  I installed Windows xp and downloaded all the drivers that worked perfectly but driver wifi did not work and there is a "?" in the named device manager as network controller, I can show pic u of this thing, can u please tell me what it is and how can I solve this problem? so that I can use wifi in my college.reply urgent please

  Install the drivers from here

• NB305-105 - FN keys do not work after installing Windows 7

  Hello

  I'm trying to install Windows 7 64 bit ultimate in netbook Toshiba NB305-105, I have install all drivers, but I can't solve the problem with the WIFI. In particular I don't found drivers for the special key FN to switch on the WIRELESS card.
  I tried different retraction, but nothing. All the drivers are installed but the FN key does not work and even for the WiFi card.

  Please help me or I come to Windows 7 32 bit?

  Thank you

  Hey,.

  You can keep Windows 7 64 bit installed, but I put t understand why you need 64-bit OS on a netbook that doesn't support 4 GB of RAM

  In any case, the FN keys to install the package of added value and utility to Support Flash Cards. These two tools controls the FN keys. They are not listed for your netbook and Windows 7 64-bit, you can download them from another model as Satellite L500.

  I'm pretty sure, they have too much work for your model. :)

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Acer Aspire ES1 111 M cannot install windows 10

  I can't update my netbook. During the Windows Update 10 WHEA 8.1 (blue error screen) error message and 8.1 windows is reinstalled. I tried several times with different USB drives external used to expand the capacity of the system.

  Clean Windows 10 installation works, but I cannot activate Windows 10.

  I have regular broadcasts with the WHEA error. It was resolved by the CPU power reduction to 95%.

  The Netbook is Acer service already, but the WHEA issue has not been resolved.

  I think back again.

  It does not resemble your ES1 111 M is on the birthday list.

  http://www.Acer.com/AC/en/us/content/Windows10-update#_ga=1.178858663.264310007.1474604665

  You can read my messages in the link below to get the previous version of "November" of Windows 10 ISO and create with rufus USB installation media.

  http://community.Acer.com/T5/E-and-M-series-laptops/disgusted-51-for-Windows-8-1-recovery-disk-from-...

  The link below explains how to clean your disk and clean install Windows 8.1 (or Windows 10).  The topic is on Windows 8.1, but it's the same instructions for Windows 10.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

• How to install Windows XP?

  Title: I deleted the win 7 starter since my computer samsung N150 laptop.

  After removing the win 7 starter to my netbook Samsung N150, I tried to install a copy of win xp. The ULC [Ultra Low Cost] sp3 version has been damaged and I don't have a copy of sp2. I know that this netbook can run win xp and I have all the drivers xp for it. How do we install .xp?  Win xp sp2 doesn't have sata drivers.

  Hello

  I suggest you to refer the link below mention that help you in installing Windows XP on your computer and check if it helps.
  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
  For the Sata drivers on the Windows XP computer, I suggest you to contact the manufacturer of the computer and check if that helps.
  Hope this information helps.