Install Windows 7 to Vista Ultimate Unit disc.

Similar Questions

• I have two Acer ASpire laptops. They are totally frozen because of the virus. I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement. I have to rebuild my laptop.

  I have two Acer Aspire laptops.  They are totally frozen because of the virus.
  I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement.
  I have to rebuild my laptop.

  Hello

  No - what are the two Acers come with a recovery disk?

  If this is not the case, one of them would have a recovery partion, which specifically is to reinstall the operating system on it.

  With an Acer, you press Alt + F10 at startup to start the recovery process.

  All data are lost when you do the above.

  And for the lost disc, contact Acer and ask them to send you recovery disks.

  They do that for a small fee:

  http://us-store.Acer.com/RCD/

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Tecra M5: Cannot install driver nVidia on Vista Ultimate SP1 x 86

  Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

  Since installing I can not any version of the nvidia drivers graphics card to install.

  "Driver Installation Module stopped working and was closed" is the error that happens every time.

  IM immensely frustrated by this

  I also posted this in the Vista forum I felt that it was a problem that is not specific to my hardware, but for vista SP1 in general, also appeared to be a much more active Board

• I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type.

  
  

  • I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type. He
  How can I fix t?
  Thanks for a much improved product.

  This thread is perhaps relevant: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3b935c1e-9c66-4236-93e8-b3356bfbb7c7 TaurArian [MVP] 2005-2010-implementation to date of Services

• If I re - install Windows 7 Premium (Vista is the original) is very unusual that I have to watch it?

  Volumn Shadow Copy Service Componet error 0 X 80042302 (Windows 7)

  If I re - install Windows 7 Premium (Vista is the original) is very unusual that I have to watch it?

  If the reinstall is successful then can I re - install my files and photos of my click-free backup hard drive or do I have to drag over the old Windows?

  Thanks for any help!

  Phil C

  You can make one in place-setting day (repair install) using the dvd.  Who reinstall Windows, but does not remove your programs, drivers and files.  You should back up your data first just in case.

  The dvd must be equal to the same service pack level or higher than the windows that you fix.  Check the label on the dvd to see if includes a service pack.  If this isn't the case, you must uninstall service packs on your system before you begin.  Subsequently, you will need enable back again to Windows Update.

  Start the in place--update by inserting the dvd while the office is running.  Click on install now on the start screen, enter your product key when asked and choose install upgrade when the Setup Type selection screen appears.

  Until you do, you can run the System File Checker, because it can replace the files with the right that are cached on your damaged system.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Reset.  That can solve your problem without having to reinstall.  It can not but its worth a shot.

• Windows Defender in vista Ultimate edition 64-bit can co-exist with anti-virus software

  Windows Defender in vista Ultimate edition 64-bit can co-exist with anti-virus like AVG 2011 and firewall, Avg & windows software?

  In fact, recommended in this case?

  AVG for disable Windows Defender.

• Windows 8 - Refresh PC pre-installed Windows key recovery or installation DVD disc

  Windows 8 - Refresh PC pre-installed Windows key recovery or installation DVD disc

  The problem is that the number of keys for Windows 8 is required for this operation, and I can't get it. I got Windows8 pre-installed when I bought the laptop, so I don't have the installation DVD, I did not collect the number of keys in any documentation or found on the laptop.

  What can I do to make sure that if I can restore Windows 8 and all my data on the laptop?

  Thanks for your help

  To put it bluntly, YOU n 'T NEED a KEY! When you reinstall Windows 8, it is automatically activated from your key incorporated in the Bios. There is no need for to go you into the Bios to get the key. With Windows 8, it is how it is done. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

• When I try to install IE 8 on vista ultimate SP1 32 bit, it gives me a message of IE 8 does not support this version of windows

  Hello

  I installed vista Ultimate edition with service pack one and installed all necessary updates. now when I want to log on to hotmail it tips download me IE 8, but when I try to install it it gives me a message that IE 8 is not supported on this version of windows.

  Wat should I do to install IE8 on vista ultimate SP! 32-bit computer.

  Thank you

  Johan

  System requirements say IE8 should work with SP1 is installed. Maybe it's because SP1 support ends July 12, 2011 and IE8 can not download without installation of the Service Pack 2 for Vista

  End of support for Vista with SP2 does not end until April 11, 2017.

• Failed to install driver Realtek HD Audio in Windows 7 and Vista [Ultimate]

  I didn't install the Realtek HD Audio driver in windows 7 and Vista.When I install it it displays a message "error code:-0001. When I install after installing graphics driver card it says "Error code: 0 x 000000103 ' a few days it worked fine without any errors. But since yesterday, I am facing the problem. I tried to install it on safe mode and uninstalled the driver of HD by default. Then it installs perfectly but I can't hear any sound and when I start my PC the default driver installs automatically. Help, please! What can I do? This problem does not persist in windows xp.

  Hi JohngLittle,

   

  Method 1

  What is the brand and model of the computer?

  What is the status of driver for sound card and graphics card driver in Device Manager and the steps to display sound and graphics driver in Device Manager include the following:

  1. click on Start

  2. in the search box, type run

  3. in the run window, type devmgmt.msc

  4. in the search for a Device Manager window for sound and display

  Check if there is no exclamation point on them or not.

  Method 2

  If you find the exclamation point on these options try to update the drivers and is the link, you can refer:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  NOTE: try to go to the website of the manufacturer of the computer and try to install the compatible sound card driver and graphic drivers and check with the question...

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you and best regards.

• KB962871 will not install the SP1 of Vista Ultimate x 64

  OPERATING SYSTEM:
  Windows Vista Ultimate x 64 SP1

  Antivirus software: Symantec Endpoint Protection 11.0.4010.19

  Problem:
  KB962871 (updated for Microsoft Office Outlook 2007 Junk Email Filter - March 10, 2009) still fails to install on my laptop Windows Vista Ultimate SP1 x 64.

  When the installation of the update fails, Microsoft Update indicates that the installation failed with error code 80070641.

  I retried the installation with my software antivirus disabled with the same result.

  I also retried the installation after you delete the contents of the C:\Windows\SoftwareDistribution\Download folder (in the case where the download was corrupted) with the same result.

  I also downloaded and tried to install the stand-alone version of the update (office2007-kb962871-fullfile - x 86 - glb.exe).  When you try to install the stand-alone version of the update, an application exception occurs and is recorded in "Problem reports and Solutions" in the Panel.  I reported these problems but no response yet from Microsoft.

  I also run the stand-alone installer in detailed logging mode.  However, there seems to be a way for me to join this post.

  The following lines appear to the last few lines of the wordy 6.6 MB outlfltr_MSPLOG resulting. LOG file:

  MSI (s) (C 60:9) [07:54:28:552]: Note: 2 1: 2262: property 3:-2147287038
  MSI (s) (C 60:9) [07:54:28:552]: transforming table property.
  MSI (s) (C 60:9) [07:54:28:552]: transforming table property.
  MSI (s) (C 60:9) [07:54:28:552]: Note: 2 1: 2262: property 3:-2147287038
  MSI (s) (C 60:9) [07:54:28:552]: transforming table property.
  MSI (s) (C 60:9) [07:54:28:615]: Note: 1: 2205 2:3: MsiDigitalSignature
  MSI (s) (C 60:9) [07:54:28:739]: internal Exception during install operation: 0xc0000005 at 0x000007FEFACC27E7.
  MSI (s) (C 60:9) [07:54:28:739]: WER report disabled installation in silent mode.
  MSI (s) (C 60:9) [07:54:28:739]: internal error MSI. Setup ends prematurely.

  I ran the sfc with the /verifyonly switch utility and it has indicated that no breach of integrity have been found.

  Has anyone else seen the same or similar problem?  Someone at - it ideas?

  Thank you

  Kevan

  If you read my original post, you'd know that the installation of the manual update was NOT the solution.

  Finally, I opened a case with the support of Microsoft and after going through several teams of different products, the question was eventually identified by a member of the team of Microsoft Outlook as a bug in Windows Installer 4.5.  He said that the Microsoft Office team noted several problems with the installation of the hotfix under Windows Installer 4.5 and suggested that I downgrade to Windows Installer 4.0 to work around these bugs.

  I went down to Windows Installer 4.5 back to Windows Installer 4.0 and the problem has been resolved.

• Re-install windows 7 on Vista

  I have a computer with Windows Vista.  Last summer, I bought the upgrade to Windows 7 Home premium and installed.  I have now a problem which requires me to re - install my system.  Once I have restore my system to the original system can re - install windows 7 with the disc that I used before.  the box says for use on a single computer.  I wanted to know before you start to restore and to know that I buy windows 7 again. Thank you

  Hello

  the license is yours

  Reinstall vista, then make the same upgrade to windows 7

  This message is to do with a permit

  one license = installation on one machine

  This is to ensure that you don't think that it can be installed it on 6 computers at the same time!

  If you have problems, reactivation, which you shouldn't, keep this practice

  read below the link on how to activate vista

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  If you have any problems, follow these steps.

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person instead of the automatic fast process

  ·                        When you do the phone activation process hang to a real person explain to, instead of the following prompts for automatic scenario

• I have Windows Vista Home Basic and I would like to install Windows 7 drivers vista with errors.

  I have Window Vista Home Basic and I would like to install Windows 7 then before as I do I have verify errors 4 of my drivers which are

  Microsoft ISATAP adapter #4 also #7 #12 #15 works not properly so I can update the drivers, then she come in saying.

  This device is not working properly because Windows cannot load the disks required for device error code 3.

  So if I can not fix it I can still install Windows 7. Please help because I need the urgency and I tried all week resolve the

  problems under Vista drives me crazy.

  Jean

  To begin troubleshooting, follow these steps:

  1. Make sure that Device Manager is open, and that the device that has the problem is selected. You can perform certain resolutions recommended by the Device Manager.
     1. Right-click my computerand then click Properties.
     2. Select the hardware tab, and then click Device Manager.
     3. Double-click the type of device that has the problem. For example, if you have problems with your modem, double-click Modems to see the devices in that category.

        A list of devices appears. If a device has problems, the unit has a red exclamation mark next to it. If a device is unknown (usually because of missing drivers), the device has a yellow question mark next to it.

     4. Right click on the device that has the problem, and then click Properties. This opens the device properties dialog box. You can see the error code in the State of the device of this dialog box.
  2. Use the Troubleshooting Wizard, if it is available, to help you diagnose and solve your problem.
     1. In the device properties dialog box, click the general tab.
     2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide. If the Troubleshooting Wizard is not available, go to step 3.
     3. Follow the resolution steps provided by the wizard to resolve the problem.
     4. Check the device status of the device properties dialog box to see if the error is resolved. If the error is resolved, you are finished. Otherwise, go to step 3.
  3. If the Troubleshooting Wizard does not have you helped to solve your problem or was not available, search for your error code in this article.

     Note If you cannot find your error code in this article, contact Support. To learn how, refer to the Microsoft Web site at the following address:

     http://support.Microsoft.com/contactus

     (http://support.microsoft.com/contactus)

  4. Follow the resolutions recommended for this error code.
     • Check the status of the device in the device properties dialog box area to see if the error is resolved. If the error is resolved, you are finished.
     • If the problem persists, unfortunately, this article did not resolve your problem. For your next steps, you can ask for help. Or, you can contact Microsoft Support to help you resolve this problem. To learn how, refer to the Microsoft Web site at the following address:
       http://support.Microsoft.com/contactus

• I am trying to install Windows 7 on Vista Home premium. Due to some games (I never play) it doesn't let me go anyfurther in installation. I tried everything to uninstall these games. What can I do to complete the installation?

  the games installed on Vista will not let me complete the installation Windows7

  Hi Rachel 30,.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  Did you run the compatibility check before installing windows 7?

  You try to upgrade or perform a new installation?

  What are the games you try to uninstall and you uninstall them completely?

  Method 1:

  Download and installation of the Upgrade Advisor. Read the following article.

  Windows 7 Upgrade Advisor

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Once you have downloaded install Upgrade Advisor and run it on the system.

  Method 2:

  Before you install Windows 7 you should check if the system is compatible or not.

  1. Insert the Windows 7 DVD in the DVD drive.

  2. click the installation option, after the system automatically checks the compatibility and it generates a report.

  You see an error message in the report?

  If Yes, then what is the error message you get?

  If you want to perform a new installation of the backup of your data and follow method 2.

  Method 3:

  If this does not work then you may need to perform a clean installation. Follow the steps mentioned below.

  Warning: In a clean installation, existing data will be deleted. These data include settings and personal data. Back up your data before you perform a new installation. After installing the operating system, you must also reinstall all programs.

  Step 1:

  Perform a new installation of Windows 7 by starting the computer from the Windows 7 Vista

  Note The computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer. Or contact the manufacturer of the computer.

  To perform a new installation of Windows 7 by starting the computer from the Windows 7 DVD, follow these steps:

  1. start the computer.

  2. Insert the Windows 7 DVD in the DVD drive, and then close the drive tray.

  3. restart the computer.

  4. When you receive the message "Press any key to boot from CD", press a key.

  5. follow the instructions to install Windows 7.

  If Windows 7 is now running on your computer, you have completed the installation successfully.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installing sp2 for my vista ultimate, I noticed in the lower right of my desktop "evaluation copy 6002.

  My problem now is my system continues to alert me that I have 0 hours left of my assessment and install a new version of windows just before the blue screen with a partial message blocking by referring to the same thing.  How can I fix without losing all my installed software and etc. ?

  Learn how to install Vista SP2
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Have you installed Vista SP2 via Windows Update or...?

  Previous, related discussions include:

  http://social.answers.Microsoft.com/forums/fi-fi/VistaInstall/thread/de1b11cb-2846-4bf7-B92A-520f3ecd33d5

  http://groups.Google.com/group/Microsoft.public.Windows.Vista.General/browse_frm/thread/2e95ead94ff4f5ab

  =================================

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I replaced my hard drive with a larger. How can I install Windows XP in it without the disc?

  My computer is old and the hard drive is full, I installed an additional hard drive, now I need to install Windows XP on it and I don't have a disk to do so.  So how can I do?

  I have an old computer and an old hard drive which is full.  So I installed an additional hard drive and need to install Windows XP on it.  I don't have a Windows XP disc for Ho w can install it.  The computer came with a disk, I downloaded it on the computer.  I can't find my code to get the download, so I was wondering how I can get the load down with it?

  Hello

  "The computer came with a disk, I downloaded it on the computer.

  You have a retail XP license?

  If that is right, or the other of these key research programs use to find your product key.

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  And if you look on the new Hard Drive manufacturer's Web site, they should provide software to "clone" your operating system currently installed through to the new hard disk.

  And here is the other free programs of cloning (PC Backup).

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon.