After installing sp2 for my vista ultimate, I noticed in the lower right of my desktop "evaluation copy 6002.

Similar Questions

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't windows after installing SP2 for Vista

  I reinstalled my 32 bit Vista OS and all updates this weekend and it worked fine.  Tonight there was an available SP2 and I downloaded and installed.  The computer has been rebooted and never started.  At one point he showed a line of registry and was hanging there with him showing.  I do not write it down, but shut down the computer.  I tried a recovery disc that I had done, but it does not work.  How can I go back to windows.  I even tried to go into safe mode but who do not have me to Windows.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 0x800f081f installing SP2 for Windows Vista

  After a few minutes, SP2 responds with error message 0x800f081f. I tried to install the auditor but gives me error CheckSur.exe stopped working. I tried to disable all antivirus and run the exe as administrator. Service Pack 1 installed fine. Something else I could try?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Install Windows 7 to Vista Ultimate Unit disc.

  Install Windows 7 to Vista Ultimate Unit disc. The page in the installation of "search updates installations" spans more than AN hour. Is this normal?

  Apply update rollup convenience following manually:
  http://support.Microsoft.com/en-us/KB/3125574

  Restart your computer, and then try again.

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Error 0x800f0900 while installing SP2 for Vista 32 bit

  I tried all of the procedures contained in the web site; including the preparation and the hotfix Tool package.  The whole process fails when you restart where he reverts the changes.  My version of Vista is 6.o which includes SP1.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  NOTE: Judging by the previous discussions on the Vista SP2 and 0x800f0900 (internal unexpected XML parsing error) error, you can see the effects of a hijackware infection! Good luck. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Somone can me link for windows vista ultimate SP2

  Somone can me link for windows vista ultimate SP2 because I lost my cd

  Hello

  There is no Windows Vista downloads available from Microsoft.

  Contact your computer manufacturer and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup.

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• Vista theme disappeared after installing SP2

  I updated vista 64 Service Pack 2 to allow the installation of ie9.  After installing sp2, my taskbar has been changed and the vista theme completely disappeared.  Areas of the screen are now much brighter, lighter or white (taskbar now is almost white and has the old style box 'Start').  I went in the 'appearance' of the control panel section and searched the vista theme - it's gone.  Installation of task bar that I had before the sp2 update is missing.  How can I get that back?  I tried to remove and reinstall sp2 and restore to earlier date and put it back - no matter what I do the screwed up theme with no option to get the old back.  Everything else works fine.  How to bring back the task of vista bar/color theme?  Is there a file I can load up?  I'm tired of wasting time of uninstallation/reinstallation.  We don't like also how change is so brilliant screen - and we do not find a way to change that either - there is no manual ocntrols and not to tarnish the brightness - no indication 'aid' does not provide - it says adjust buttons that do not exist.  How to bring back the vista theme?

  Hello

  I suggest you to follow the methods below and check if it helps:

  Method 1:

  Try following the steps in the article provided below and check if it helps:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2:

  Also try running the Fixit from the link provided below:

  Visual effects Aero Glass in Windows are not working or displayed

  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  Method 3:

  I also suggest you update the graphics drivers on the manufacturer's Web site click the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this helps,

• Try to install SP2 for Vista: error 8024200B.

  Code 8024200B

  Try to install sp2 more than once now.  I get the error 'Code 8024200 B '.  I can't find a solution for this anywhere.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Arabic Language Pack for Windows Vista Ultimate 32-bit

  Dear Sir/Madam

  There was a 'Arabic Language Pack' available on Windows Update for Windows Vista Ultimate 32 bit, but when I installed SP2 for 'Vista Ultimate' is now gone from the Windows Update Page, so where can I get it now?

  Thanks in advance
  Yours sincerely,
  Elsharif

  Assumed as replied, without other added messages

• stepupgrade windows vista business Japanese version for windows vista Ultimate edition

  Recently, I bought a laptop in the Japan. The operating system is Windows Vista Business Japanese Version. I'm not familiar with the Japanese language and because of that I wanted to change it to English. I had discovered to find the way to put in place, but I found there was no way else to solve except buy a new Windows Vista with English Version or mine upgrade to Windows Vista ultimate. And I want to ask a question:
  1. is there anything else beside what I mentioned above?
  2. If I decided to buy a Step-Upgrade Vista Ultimate DVD Business, should I buy with the same language version with my Vista business, Japanese Version? Or is it fine with Step-setting level Vista Business to ultimate DVD English version anyway?
  3. Please show me how to change the display language after upgrade my Vista to Vista Ultimate!
  3. in the future, if there is a problem that I have to reinstall the OS, this DVD of Step - update allows again?

  Thank you for your attention.
  I'm sorry, my English is not good enough, I hope that you will understand my questions.

  Best account.
  Louise

  Change language:

  1. to change your Vista professional Japanese language to English, you can buy a Japanese Vista Ultimate Upgrade disk/license.

  Then download the English language through Windows Update as an option Pack.

  Vista Ultimate upgrade must be done in the original language Vista came.

  2. your other Option is to buy a FULL Vista Business English version and do a clean install.

  3. If you want to reinstall, you need the original installation of business > Ultimate upgrade > re-download the optional updates in Windows English Language Pack...

  See you soon.

  Mick Murphy - Microsoft partner

• I bought Vista Ultimate professional to upgrade the installed Vista. The 'Upgrade' feature is disabled in my professional (full) Vista Ultimate package. Why?

  Why can't go from Vista Home Premium to Vista Ultimate?

  I have a laptop double boot configured with Vista Home Premium and Windows 7 Professional.

  I bought Vista Ultimate professional to upgrade the installed Vista. The 'Upgrade' feature is disabled in my professional (full) Vista Ultimate package. Why?

  Update requires the same Service Pack level.  For example, if your current Windows Vista Home Premium SP1 or SP2 installed, you will need to uninstall the Service Pack to be able to use the Windows Vista Ultimate Edition disc, you have that has no Service Pack integrated.

  See: How to uninstall Windows Vista service packs as a troubleshooting step

• have vista ultimate 32 bit and you want to install vista ultimate 64-bit on the same PC and transfer files from 32 to 64 and then delete 32 bits can be done on only 1pc?

  have w 120 GB HD on 60 GB free DVD have 32 and 64, as well as 2 DVDs with Office 2007 Ultimate. Could save the address book and all the other files, I want to keep and remove up to a 32-bit skeleton and then install a 64 bit os nude and would only be concerned on my ISP software as I have Comcast XFinity digital phone and Internet and a digital HD video recorder a 1986 Radio Shack Color TV at the wheel (the 1986 $500 that was a beauty for its time and is still.) My PC is an emachines T3616 and I have 2 GB of RAM installed (max) it is possible in this way?

  Hi Herman,.

  You can try to use Windows Easy Transfer to transfer data and settings to C: on D: drive and install Windows Vista Ultimate 64-bit on the C: drive. After installing Windows Vista 64 bit on C: drive try to reuse Windows Easy transfer to transfer the data back (from D: to C: drive).

  You can also take an external data backup before you attempt the Installation of Windows Vista.

  For more information, you can consult the following articles:

  Transferring files and settings: frequently asked questions

  Installation and reinstallation of Windows Vista

  Hope this information is useful.