install windows 8 on problem t430

Similar Questions

• Installing Windows Live Messenger problem (hr:0x8104000d)

  Hello world
  Yesterday I installed my Windows 7 Home Premium OS using the costum install because I wanted to whipe clean my Dell Inspiron 1440 laptop. And everything works so far, except that I can't install Windows Live Messenger.

  I tried to download the installer from explore.live.com essentials, microsoft.com and by using the Windows Update, but it does not install. I looked and tried to run the Windows Live installer about 6 times. And it's always the same thing. About 98% is to install the Windows Live Call, and when it reaches 100%, it cancels.

  I also tried to download the Msn Messenger 7.0 and tries to update the software. For the record, I can't even use the Msn Messenger 7.0 because it says I need to update. And I can't update it because apparently I am not connected to .NET Messenger Service. I tried to test the connection, and it has failed due to an error of invalid character script. After that, I checked the advanced settings and ran tests; My TCP and HTTP Proxy connection works.

  I am currently using Kaspersky Internet Security and I even checked to see if the firewall was blocking it, but the installation of Windows Live is considered a trusted software. I even tried to disable my firewall to see if it makes a difference. No luck so far.

  The error that says:
  Check that you are connected to the Internet. You cannot download Windows Live programs unless you are connected to the Internet. HR:0x8104000d

  I honestly do not understand. I am currently connected through a LAN network with an ethernet cable, but I also tried to unplug and connect to the internet via the WAN.

  The only cause of this problem that comes to mind, it is that I had to uninstall the Dell Wireless WLAN Card Utility utility before I could uninstall Windows 7. But I have already run all Windows updates. Not that it makes all the difference because I was already connected to the internet.

  Any ideas on how to fix it?

  UH well Windows Vista OS came with my laptop and I have improved with the installation of costum (new installation) to set up my Windows 7 operating system. If everything has been wiped clean. Obviously for this reason that I don't have windows live messenger installed. If I had simply updated the operating system, all my files are remained intact. My Windows 7 operating system is 64-bit, and yes it is compatible with my computer. As I said above, everything else seems to work.

  As for Kaspersky Internet Security, it is supported by Win7 64 bit.
  Reference: http://usa.kaspersky.com/products_services/internet-security.php?icid=50000028

  A Norton Internet Security trial came pre-installed with my laptop, but I removed this month there are using a Norton removal tool. Not that it matters now, since I wiped clean my drive hard when I installed Windows 7.

  And as for the older versions of Windows Live Messenger, I think I mentioned on my first thread I knew that they did not work. Still, trying to update an older version seemed to be a good idea since I kept not install it. However, which also did not work.

  Anyway, thanks for clarifying your first answer. I'll post this same thread on the discussion Forum to see if anyone there can inspire some light in my situation.

• Since installing windows 10 display problems

  I am new to these forums and I hope someone can help me with a problem since installing windows 10 last night, I. When I opened the premier, everything seems to go well except I get no video previews in the source or timeline panels. When I play the clip I can hear the audio but just get a white screen where the video should be.

  I tried to open an old project, create a new project and import a mp4 clip over and the same result.

  I tried to switch back compatibility on windows 8 and empty my cache of media folder.

  I use the latest version of the first pro, but when I went to update this morning I also get an error message.

  Everyone knows about it or have any solution?

  Thanks in advance

  Hi Meagan,

  I would say that switching video converter.

  Go to file > project settings > General and change the "Video Renderer" to "only Mercury playback engine software. Click 'OK' and select "Remove the Previews". Save the project and then restart Premiere Pro.

  Hope that helps.

  Regalo

• Windows Setup cannot reset the deployment engine. To install windows, restart the installation.

  Background: I bought a new 1.5 TB Seagate Baracuda disk to replace my current 500 GB drive.

  Symptoms: I removed the old drive and installed the new drive.  I try to install Vista 32.  I have spend entering setup, past the disk partitioning key, then get up at installation windows... never goes beyond 0% and this error pops up.  It's a never-ending cycle.

  Information on PC:
  HP Pavilion Media Center
  Model: M8100n
  RAM: 3 GB
  Processor: AMD Athlon 64 2.8 GHz
  Chipset: GeForce 6150SE nForce 430
  Motherboard: ECS MCP61PM-HM (HP/Compaq name: Nettle2-GL8E)

  What I've done so far:
  Update the BIOS & chipset drivers.
  Using the same drive, I can install windows XP without problems.
  Using the same player can I clone my existing to the new player (while it really works, I want a clean install and not a copy of the disc I have with it is that existing space)
  Once I have clone the new drive I can do a fresh install of Vista from above (even once is not ideal and just wasting disk space)

  The problem is that I can't delete all existing partitions, format my new drive and install Vista 32.

  Problem is solved.  I don't have a chance to check the compatibility of the reader, but I found a solution that worked.  It turns out that the problem seems to have been a problem of formatting the drive via the Vista CD.  It's very frustrating when you get an error which is not defined anywhere, especially, a mistake by Microsoft that they document on their support pages.

  Anyway, I would not normally copy / paste an answer, but it's the solution that worked for me that I found on another forum (thanks Mak)

  Download GParted.

  http://sourceforge.NET/project/mirror_picker.php?height=350&width=300&group_id=115843&use_mirror=superb-East&filename=gparted-LiveCD-0.3.3-0.ISO

  Download and burn the ISO with ImgBurn:

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  From there load GParted with the CD in your taskbar. It is a bootable CD. From there, select the partition that you want to install to. right click on the partition and you will see the format option. Choose the NTFS option and format the drive. Then restart with the Vista DVD in the status bar.

  Go through the startup process. It should work now.

  The problem you are experiencing is related to the format. Vista does not have a formatting full it made just a short where it erases the data. The problem is that you have a damaged area on the hard drive that is causing this problem.

  This will get rid of spot and allow installation to complete.

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• Pre-installed Windows 8 does not properly.

  Hello

  I have a HP Elite 7500 desktop PC and it has a pre-installed Windows 8 Pro 64-bit. When I tried to set up for his first start, I have unfortunately to stop the process and when I restart the pc it says that you need to re - install windows. but the problem is that I don't have the disk to backup or restore. I already tried to retrieve using the hp recovery by pressing f8 before it starts, but it shows a white screen. and there is a message that is the recovery image may be missing because I could not complete the installation for the first start. How can I continue the installation? Help, please. Thanks in advance,

  You need to contact HP support as soon as possible help with a brand new computer. The computer should work right out of the box.

• The sign '+' opens NEW TAB stopped working. I have to open a new window each time. I tried to uninstall firefox and install again but the problem persists. Someone guide me on this.

  The sign '+' opens NEW TAB stopped working suddenly. I have to open a new window each time. I tried to uninstall firefox and install again but the problem persists. Someone guide me on this.

  Your agent uisr string is "Mozilla/5.0 (Windows;" U; Windows NT 5.1; en-US; (RV:1.9.2.15) gecko/20110303 AskTbMPC2/3.11.0.15286 Firefox/3.6.15 ', the part of AskTbMPC2 shows you have the toolbar installed Ask. Some third-party programs will add the Ask toolbar.

• Problem installing Windows XP on the Satellite A200-1VF

  I'm trying to install Windows XP with SP2.
  I created a new installation of Window XP with nlite disc and included the Storage Manager to get access to the hard drive.

  I started with this new record of installations and allows to manage my hard drive.
  Then it is formatted and files have been copied to the hard drive. After the 1 st reboot. takes place.

  Windows XP logo appears logo disappears after a few seconds and it's time that the installation of 1 st screen.
  But instead, it appears a box with a red X and an error message "for the given process is not enough quotas for virtual storage or the pagefile" 2 seconds later, the system will reboot and restart the installation and gets the same message and so on.

  The system is already flashed with the BIOS V5.30 for XP.
  To continue installing XP any help is appreciated.

  Thanks Klaus

  Hello

  just a quick question: is the recovery for Vista work? I mean, it sounds like a hardware problem, but usually if the machine worked well before, it must be another problem. The image that was created with nLite is maybe defective...

  Would appreciate comments on your part.

  Welcome them

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Satellite A300-1 OC - problem installing Windows XP

  Hi all!

  Faced with the need to install * Windows XP * on my * Satellite A300-1OC. *.

  Here's the problem:
  the * pilot integrated distribution OS for the SATA downloaded from the Intel site.
  When you install XP no problem, but * when you drive where to install the system all the drive letters got mixed up *.
  As it has already established a system, the * laptop starts sometimes hang on for 2-3 minutes, then again normally.* operating

  Help solve this problem and recommend the correct SATA driver for my computer.
  And I would like to hear the difference, * if I set BIOS compatibility mode or leave AHCI.*

  + Thanks in advance. +

  Hello

  Please, read here:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52625&TSTART=30

  It may be useful for you. The topic starter had the same problem, it instaled windows, compatible mode, and then extract the driver of the exe files.

• Re-installed windows 98SE on satellite 230CX only one problem left

  I have just re installed windows 98SE on and old satellite 230CX and I only have one problem left. Whenever I start windows it is a plug-and-play monitor and try to find a driver for it. There is no connected another monitor and the screen works well. I know this isn't a major problem, but it's just bugging me now.

  Any help would be appreciated

  See you soon

  Rob.

  Hello

  I found the info that this camera comes with Win 95 and on the Toshiba download page under archive, you will find all the drivers you need.

  Try to install the driver display that there are listed. This is a very old unit and I can't tell you more about your problem.

• Portege M200 - problem installing Windows Xp - BSOD

  I recently got 2 computers Portege M200 laptops, but previous users had wiped the hard drive.
  So now im trying to install windows Xp via cd-rom drives externel accompanying.
  But when its load to the top of the windows Xp cd it gives me a BSOD somewhere near the end of loading the CD (it always stops on 'Setup starts windows').

  Now, I thought that this could be a hard drive problem, so I have a drive hard "nine", but this still does not work (this problem exists on two laptops).

  Now im wondering if theres some sort of special installation process or something of the sort for the M200?

  I hope someone can help me with my problem.
  Thank you... DG

  Hi mate,

  What version of Windows XP you are trying to install? Windows XP Professional or Tablet edition? You have the available recovery? If Yes, then you should use it :)

  If not, you should check if there could be maybe something with the Tablet thing. It s just a hint, so I'm sorry that I Don t have a real good solution...

  Good luck

• I have a problem when I install windows xp

  I need to install windows xp on my laptop

  When I tried to install windows cp on my laptop, I got the problem below

  http://i333.Photobucket.com/albums/m375/RCP-Pro/RCPddd.gif

  Windows could not find my hard drive

  is my laptop: compaq presario cq57-401se

  I need to install windows xp somehow

  and I need to download my sata device driver... and I could not find

  Read the article from AMD on the link below and then read the downloadable PDF to find out how to integrate the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.