Install Windows XP Home Edition, the lack of CD

Similar Questions

• I installed Windows XP Home Edition. Can not find the wireless network drive

  I installed Windows XP Home Edition on my spare PC.  Now I have wireless network card in the computer and problems to find the drivers for it, and I don't know what brand it is, so I know it's kind of makes it harder too.  Then I also have to start the computer, but if I press F1, the computer starts well

  I was just wondering how can I get rid of this?

  

  Disable all devices that can connect to your router (wired or wireless)...

  • PCs
  • Laptops
  • Tablets
  • Smartphones
  • Smart TV
  • Printers
  • Networked storage
  • Another thing that I have not mentioned above!

  Put on your router and wait for the normal light distribution. Then turn on all devices.

  I hope that your ip address conflict went away. Generally ip conflicts can happen when the router is running again without doing the same with all devices later.

  If you have even an ip address conflict, it is possible that you forgot something above or can someone use your router without your knowledge.

  Your router's wireless network is secure? Ideally with WPA2 encryption?

  Tricky

• Why try to install Windows XP Home edition, I get a message that I need to use the full version. It is the full version.

  XP Professional - Full Version installation problem

  I have an old laptop - been putting up with my old XP Professional - Full Version software so my children can use for games and I get a message that I need to install Windows XP Home Edition - full Version.

  What is the screen, you see? If Yes, are you pressing enter as you should?

  

• I am trying to install Windows XP Home Edition on Xp Pro. How do I?

  I am trying to install Windows XP Home Edition on XP Pro. How do I? I load it in the drive, reboot and it won't work.

  Without going into why you might want to do this, you may access your computer's BIOS and change the order of boot devices so that it looks first at the CD player.  When you start the computer, watch the screen carefully.  There will be a message that says something like, "to change the system settings, press F1.  The exact text, as well as the key, may be different.

  Restart the computer and press the key as soon as you see the message (you'll probably just a few seconds).  Once you are in the BIOS configuration utility, navigate using the arrow keys, the tab and button.  Navigation instructions usually appear at the bottom of each screen.

  Here's a 'how to' with screenshots.  Your computer may not be identical, but this should help you in the right direction: http://pcsupport.about.com/od/fixtheproblem/ss/bootorderchange.htm

• Newly installed Windows XP Home Edition SP1a Version 2002 works not properly.

  I have a Dell Dimension 4300 S and I recently installed Windows XP Home Edition SP1a Version 2002 from the disc I have. When I try to download the SP2 and SP3 from Microsoft I get this box that says "extraction error." I can't download anything and sometimes, when I'm on the internet on this computer, it says "Internet Explorer has encountered a problem and needs to close" and I send error report and, sometimes gives me the blue screen and starts dumping memory. Also, it wont let me on the Windows Update page and the computer won't auto updates.

  Does anyone know what is the problem? I reinstalled Windows XP Home Edition SP1a Version 2002 two or three times now and linked the repair disk, and I always get the same problems.
  Let me know if I have to give any specs or whatever it is.

  Love the help I'm getting here. :)

  Sorry for the delay but this is a public forum, the vast majority of us here are simply users of Microsoft products (even those with MVP behine their names which is just an honorary title) as help you others when we can. We have no affiliation with Microsoft, nor do we receive any advantage whatsoever, we are just volunteers. Occasionally, a Microsoft employee can post but it's pretty rare. On your workstation.

  After having reinstalled Windows XP Home Edition SP1a have you installed the necessary drivers? This includes drivers for the motherboard (chipset), audio, video, LAN (network adapter), and so on.  If this is not the case, check the page linked below:

  Drivers & downloads for Dimension 4300 S 
   http://support.Dell.com/support/downloads/DriversList.aspx?c=US&CS=19&l=en&s=DHS&ServiceTag=&SystemID=DIM_PNT_P4_4300S&OS=WW1&OSL=en&CATID=&impid=

  If you are not quite familiar with the Setup pages both driver below should help:

  Dell - drivers & downloads help
   http://support.Dell.com/support/topics/global.aspx/support/downloads/en/drivers_help?c=us&CS=19&l=en&s=DHS& ~ CK = anavml

  How to download and install drivers in the correct order
   http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&docid=268873&l=en&s=DHS

  Since SP1a was part of the reinstallation, you will only need to install SP3. The page below the States 'in order to install SP3, you must first have Windows XP Service Pack 1a (SP1a) or Service Pack 2 (SP2) "installed.".

  Learn how to install Windows XP Service Pack 3 (SP3)
  (see manually install SP3 using the Microsoft Download Center or a CD)
   http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  IMO, it's better to download SP3 for:

  Windows XP Service Pack 3 network installation Package for IT professionals and developers
   http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  I know that the above download is 316 MB and will take time to download, but from my experience, I had much better luck with that route. In addition, you can then save SP3 on a CD if you need to reinstall again.

  Finally, the following page should help you in the process of installing SP3:

  Steps to take before you install Windows XP Service Pack 3
   http://support.Microsoft.com/kb/950717

  Please post back should you need more help and good luck!

• Stop error: 0x0000007b while trying to install Windows XP Home Edition on SATA hard drive.

  Original title: new hard drive Blues.

  got sata disk hard western digital 500 GB installed, I have tried to download winxp home, got a blue screen

  stop: 0x0000007b (0xF78D663c, 0xc0000034, 0x00000000, 0x00000000

  I need help

  Hi aqm0207,

  How you try to install Windows XP Home Edition?

  You may receive an error message "Stop 0x0000007B" in the following scenarios:

  (a) a device driver that your computer boot controller needs is not configured to start during the startup process.

  (b) a device driver that needs your computer startup controller is damaged.

  (c) It can also occur if the hard drive in the BIOS configuration is bad.

  You can check if the SATA hard drive is correctly configured in the BIOS (Basic Input Output System) & can also update the BIOS. If you are not comfortable to do, you can contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  You can also check this link:Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install Windows XP Home on the Satellite A200-1CR

  I can't install Windows XP Home on the Satellite A200-1CR

  Help

  Did you get any error messages or what?

  Thanks for posting more details!

• When I start with Windows XP Home Edition, the screen appears, only the mouse arrow. Help!

  When I start with Windows XP Home Edition, the screen appears, only the mouse arrow.  Help!

  Hi stevejager,

  ·         Remember to make changes?

  ·         You receive an error when starting?

  ·         Have you tried booting in safe mode?

  Method 1: First of all, we will try to start the computer in last good known Configuration and see if it boots.

  Method 2: If it is impossible to start, try to start in safe mode. If able to start and then try to perform a System Restore, since this is a recent problem that has occurred.

  Method 3: Follow the steps in the below article mentioned.

  Computer stops responding with a black screen when you start Windows XP

• Lost the disk to install windows xp home edition

  Two computers: Windows XP Home edition installation disc was lost for computer #1 and I need to reinstall windows on this computer, I have the product key number and the number of OEM for this computer(#1). The question is can I use the installation disc for computer #2 in the #1 computer and use the product number of the #1?

  You * may * be able to get away with it - but you'll probably need to install using the disc and the key to #2 (it is almost certainly integrated in the drive), and then change the key of the injector appropriate using the product key update tool

  http://Windows.Microsoft.com/en-GB/Windows/help/genuine/product-key

• You will need to re - install windows xp home edition after hardware failure.

  Hello

  I have an old e-machines computer desk (T1842) I bought nine years ago. It comes preinstalled with microsoft windows xp home edition, there is little time, we had a power surge in our House because of an act of God. I didn't throw this computer, so I bought a new power supply and a new motherboard for my computer running again. This is where my problem occurs, the hard drive on this computer became corrupt, and I have to re - install the operating system on it. The only software that has been arranged for me at time of purchase was a two disc set of what e machines calls "recovery disc". I tried to use these disk to get my computer running again, but there seems to be a hardware conflict now because I had to replace the motherboard, etc... What can I do to get my computer working again, of course, I still have the certificate of authenticity of microsoft / label the product key provided on the back of my computer at the time of the purchase, but the product key does not seem to help me solve this problem. I do not want to get my computer working again, it would be nice if I could get a new disk of software that would be compatible with this new motherboard, etc.. Can someone help me please?

  Thank you

  David

  FWIW... The motherboard came with a driver disk? If you use the recovery disk, I don't think you will be able to re - install windows from scratch. Even if you could you would have problems with the product key code, since the code you have is registered to the old mobo. You can click on the link below and follow the instructions to create a Utlity Cd, allowing you to recover your data on the hard drive. It is also full other little tools that will be useful.

  http://www.repairbotsonline.com/tools-and-software-section-F13/best-boot-disk-to-repair-restore-Windows-CD-T192.htm

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Error - "product ID you entered is invalid" when trying to install Windows XP Home edition computer.

  Original title: with regard to the installation of windows xP home edition

  Mr President, I am reinstalling windows xp home edition in my acer laptop and its not to take my key and rejecting IE - the product id you entered is not valid. my product key is [deleted txt]. proof of license - x 12-53761 please send a new product to this email id - * E-mail address is removed from the privacy *.

  Hi Renon,

  You can follow this link & check if the problem persists:

  You receive an error message after you enter the product key when you try to install Windows XP

  Hope the helps of information.
  Please post back and we do know.

• How to save with pre-installed Windows XP Home edition SP3 but no install disc?

  I want to save data files on desktop with preinstalled Windows XP Home Edition SP3.  I don't have access to an installation disc.   How can I get a?

  You don't need a Windows installation CD in order to backup data files.  What makes you think do you?

  [The light bulb turns]: you're probably trying to install NTBackup.  My advice to you is to forget NTBackup and get a disk imaging or cloning application.  I propose the following actions:

  Acronis True Image Home 
  Paragon backup and recovery home
  Casper 6.0
  Norton Ghost (used to be the standard for imaging applications, but I haven't used recent editions; if you really want to use a Symantec product, read the reviews on Amazon)

  If you really want to use NTBackup (worth what you pay for it), see http://www.ihatedroz.com/windows-backup-utility-without-cd

• Windows Vista Home Edition: The permissions of Reseting back to zero/all around, or default system restore reset. ?????????????

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: 2 Questions actually & I have Windows Vista Home Edition...:

  (1) I begun to change some permissions under the Security tab of the properties, and now they are screwed... How can I reset just all permissions to the default settings? Help, please! Boy, I'm arrested for murder... My laptop about to be thrown through the window of a building-sky.

  (2) is there a way to reset or restore my system? I don't like to lose anything it all. I saved what I want or need. I just want to start from scratch...

  In fact, I have 1 other question... Whole reason I messed my permissions first is because I've had this laptop second hand and I did EVERYTHING to get rid of the old owners as a user name and I IMPOSSIBLE... It drives me crazy. I am the owner / administrator and there is no other user accounts, but still all my programs and files have this other names of people on them.

  * Thank you very much to all those who can help me!

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You must always wipe a used computer and start over.

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Tecra S3 - need SATA / RAID driver for installing Windows XP Home edition

  I'm doing a new installation of windows xp on a Toshiba Tecra S3 model PTS30E-0DT03FDU
  Who knows where to find the RAID driver to load when you start the installation of xp?

  This model no longer appears in the driver download section.

  Of course, it is listed by download, but the older models are listed in the ARCHIVES.

  Please visit the download page for Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp - once again and the slot type of product choose Archive.

  For Windows XP Home edition, you will find RAID driver for download.
  Can find you it?

• Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has

  Hello
  When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
  When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.

  At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?

  Hello

  Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.

  However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.

  Check it out!