Installation card mother Precision T3500 in a new chassis?

Similar Questions

• Precision T3500 recognizes the new HARD drive

  I have a new 4 TB Seagate hard drive that I'm tempted to install than the third HDD on my Dell Precision T3500 system. The BIOS detects the drive fine, but nothing in the operating system (Windows 7 64-bit) find it - no disk, Device Manager or Seagate diagnostic tools management.

  Seagate support said the only thing that might be, is that my fast storage Chipset driver needs to be updated. It's a little out of my depth. I tried searching for a driver updated via the Device Manager, but it says my driver is up to date, but that date is 2010. I downloaded these files:

  INTEL_RAPID-STORAGE-TECHNOLO_A07_R291721. EXE

  SATA_DRVR_WIN_R264763. EXE

  on the site of driver from Dell, but I'm not clear what to do with them.

  SATA Operation should be AHCI and INTEL RST must be 10.1 or higher.  OS must be the 64-bit version, you also need a series of Host Bus Adapter as the Rocket 600.  That's what western Digital uses to resolve these problems.  ACHI HBA is necessary.  The rocket 620 HBA is a solution.

  http://www.Amazon.com/HIGHPOINT-technologies-rocket-620-ROCKET620/DP/B003FFZD0O

  cs_setInnerHtml ('video_51111d5d-89da-4447-bb87-ba7a5b67b199', ");

  Intel RST replaces Intel Matrix Storage Manager.  HOWEVER you cannot update to your hearts content of 7-8-9-10 11-12 or 13 etc.  As newer chipsets and drivers get the older ICH5 6 7 8 9 etc. are removed from support.

  Downloadcenter.Intel.com/.../15251
  Version 9.6.0.1014 maybe the max for your motherboard

  PCI\VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  PCI\VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  PCI\VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  PCI\VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5/3400 SATA RAID.
  PCI\VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID.

  The lowest that supports over 2 TB is the RST Version 10.1.0.1008

  Downloadcenter.Intel.com/.../20768

  In general INTEL RST Version 10,11,12,13 ICH8

  IMSM = earlier Version of the driver.

  IMSM is NOT EQUAL to INTEL RST

  Intel® Rapid Storage Technology (Intel® RST) version 9.6 and new records sector supports 4 k if the device supports the emulation of 512 bytes (512th). Intel® RST does not support size of 4 k of the native devices.

  What happens if I try to use an older version of the driver?

  If you try to install the operating system on a disk 512th with an older Intel® RST 9.6 version driver, the installation process could not complete.  This driver is not validated with your XPS and may not work at all. There is ZERO support for it if its does not work.  The INSTALLATION of THIS DRIVER if its does not work can lead to the loss of 100 percent of all data.  Do so at your own RISK.  Installing a version higher than taken chipset support does the same thing.  All data lost RAID restart from zero.

  https://Downloadcenter.Intel.com/download/15251/RAID-Intel-rapid-storage-technology-driver-for-Intel-Desktop-Boards

  If the operating system is installed, do not upgrade to Intel® RST 9.6 version without having to reinstall your operating system.

  As the versions date back earlier support ICH Goes Down aka unsupported.

  You can't have the following

  • Intel® PCHM SATA RAID/AHCI Controller Hub
  • Intel® PCH SATA RAID/AHCI Controller Hub
  • Intel® ICH10R / o controller hub DO SATA RAID/AHCI
  • Hub of Intel® ICH10D SATA AHCI controller
  • Intel® ICH9M-E SATA AHCI/RAID controller hub
  • Intel® ICH9M AHCI Controller Hub
  • Central Intel® 82801IR/IO controller (ICH9R / DO)-RAID and AHCI

  	Title	Date	Version (status)	Type
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installs version 13.6.0.1002 of the RAID Intel® Rapid Storage Technology (Intel® RST) driver. OS: Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *, Windows Server 2012 R2 *,... .more	10/12/2014	13.6.0.1002 (Latest version)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 12.8.0.1016 driver). OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows 8.1*, Windows Server 2012 *.	08/08/2013	12.8.0.1016 (Previously released)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 12.9.0.1001 driver). OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *,... .more	12/12/2013	12.9.0.1001 (Previously released)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 13.1.0.1058 driver). OS: Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *, Windows Server 2012 R2 *,... .more	27/05/2014	13.1.0.1058

  
  (Previously released)Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installs version 13.2.4.1000 of the RAID Intel® Rapid Storage Technology (Intel® RST) driver.
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *,... .more
  01/08/2014 13.2.4.1000
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 12.5.0.1066 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  22/03/2013 12.5.0.1066
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 12.0.0.1083 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  01/02/2013 12.0.0.1083
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 11.7.0.1013 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  03/12/2012 11.7.0.1013
  (Previously released) Drivers

  Intel® Matrix Storage Manager

  Support for SATA RAID 5/10 on specific desktop platforms, SATA RAID 0/1, AHCI, and matrix RAID on desktop platforms and mobile specific
  OS: Windows Server 2003 *, Windows Server 2003 Enterprise x 64 Edition *, Windows Server 2003 Standard edition *, Windows Server 2003 Standard x 64 Edition *, Windows Server 2008 *,... .more
  17/07/2009 8.9.0.1023
  (Previously released)

  Features supported

  ICH7M

  ICH7R ICH7DH

  ICH7MDH

  631xESB

  
  632xESB ICH8R
  ICH8DH
  ICH8DO ICH8M ICH8M-E ICH9R
  ICH9DO ICH9M-E
  PCH - M ICH10D ICH10DO PCH Support for volume 2-256 to (data only volumes) NO. NO. NO. NO. NO. NO. NO. YES NO. NO. YES YES Expansion of capacity NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. YES YES Load under Windows 7 TRIM * (mode AHCI and RAID for disks is not part of a RAID volume) YES YES YES YES YES YES YES YES YES YES

  64 bit OS is required for readers more 2 TB

  INTEL RST over the 10.1 version is required for larger than 2 TB drives

  http://knowledge.Seagate.com/articles/en_US/FAQ/218615en

  Like other types of software, the Intel RST drivers are updated to keep pace with new technologies. Intel drivers, found in versions of the retail of Windows 7 have a limit of 2.2 TB. Rather than cutting capacity to 2.2 TB, the limitation is expressed like the rest above 2.2 to. In other words, the driver causes the windows operating to see a 3 TB drive 746.52 GiB (or 800 GB).

  With OS two 32-bit, the start address of length and partition partition are stored as 32-bit quantities.
  Because the block size is 512 bytes, this means that neither the maximum size of a partition
  Neither the maximum start address (both in bytes) can be greater than 2 ^ 32 × 512 bytes, or 2 TiB

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  The GUID (GPT) Partition Table has been introduced under the initiative of the Unified Extensible Firmware Interface (UEFI). The maximum size of the partition (disc) is a function of the operating system version. The original version of Windows Server 2003 and Windows XP have a limit of 2 TB per physical disk, including all partitions. For Windows Server 2003 SP1, Windows XP x 64 edition and later versions, the maximum raw score of 18 exabytes may be supported. (Windows file systems are currently limited to 256 terabytes each.)

  

  https://Downloadcenter.Intel.com/download/17131

  8.6.0.1007

  Downloadcenter.Intel.com/.../17882
  8.9.0.1023

  Intel® Matrix Storage Manager Driver
  . DeviceDesc PCI VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / PCH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/PCHM SATA RAID.

  Downloadcenter.Intel.com/.../15251
  Version 9.6.0.1014

  Intel® Rapid Storage Technology driver
  PCI\VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  PCI\VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  PCI\VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  PCI\VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5 Series/3400 Series SATA RAID.
  PCI\VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID.

  Downloadcenter.Intel.com/.../20104
  Version 10.1.0.1008

  . DeviceDesc PCI VEN_8086 & DEV_2682 & CC_0104 = 'Intel(r) ESB2 SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/Search
  10.5.0.1027

  Downloadcenter.Intel.com/.../20768

  Version 10.8.0.1003

  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/.../21854

  Version 11.2.0.1006
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/.../21858

  Version 11.6.0.1030
  Windows 7 (32 bit), Windows 7 (64-bit), 32-bit Windows 8, Windows 8, 64-bit

  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = "Mobile Intel Express Chipset SATA RAID.

• I had to get a new card mother and lost of Photoshop CS5.

  I had to get a new card mother and lost of Photoshop CS5.

  I'm going to install and, because it is an upgrade, need CS 4 installed. I can not CS4 to start installation. It fails is there a way to get around this?

  You don't need to install CS4, but do not have your serial number CS4 enter when asked

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• Help with the new card mother and Vista problem?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  Hey icuhavoc

  are recovery disks to reinstall vista with the original hardware installed if I understand you correctly know what records you need to know a set of manufacturer's recovery disks

  If it is pre-installed this is an oem license and does not change unless you did it in consultation with the manufacturer of models of motherboards and processors

  Walter, the time zone traveller

• Inspiron One 2020 new card mother help

  Greetings & Salmenella

  The high memory slot on the motherboard of my Inspiron One 2020 beeps stop known, two beeps of intervals. Any memory I put in the continuous ringing. It stops if I have a memory stick into the lower slot.

  I need help on the verification of the correct mother card to purchase or if it is a card mother Dell different that I can spend which will enter in the box. I don't mind if I have to make the cuts or small holes in the back plate, since I already have the holes for a tuner card, I bought after that I bought the model which had no openings for cable TV.

  I really don't want to go buy a brand new for a slot with memory 4meg bad computer. I have a solid state, 8 GB RAM and 2 GB of RAM, it runs fast enough that I do not have to buy a new computer. But losing that 4gigs of ram in the bad memory slot. Holy Ding Dong, the hard drive takes forever to stop making noise, surfing slows down and compilation and writing of visual basic for class takes forever.

  Now for the short version.

  What is the correct motherboard model to replace an Inspiron One 2020 or is there a model of mark liked that a motherboard will suit my AIO home and get all my guts of the computer. I have a 5-2390T UC iCore.

  Love,

  Stu

  Any advice for this model are the same - but nothing else that will fit the original.

  www.amazon.com/.../B00I9OQQ7U

• sequence of the RAM on the card mother dx58m01

  I have a dell xps 435mt core i7 920 with a studio card mother dx58m01. There is 6gig ram. 6x1024mb glue 1066 mhz. I want to change ram at 3x2gig sticks memory triple channel 1600 mhz. does anyone know the sequence of installation for this configuration. I currently at 1,3,5. It seems to run pretty slow however. Thank you guys

  Contact Support technique Dell http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&cs=19&l=en&s=dhs& ~ ck = anavml and give them your express service code and/or your product tag so that they can identify your specific machine.  Are all devices that are identical except for the new chips?  Then they should be able to tell the order to use because they know a lot more about their systems we do.  We could just guess they know.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dell Precision T3500 and SPDIF Port

  Hello

  I'm in the market for a new computer because my old HP died and I really like the Dell Precision T3500. I would like to put one of my old graphics card in the new Precision T3500, a Nvidia Geforce 8500 GT because it has a HDMI port on it and I want to drive my television station. However, have sound out of the HDMI on the Geforce port, you must connect an SPDIF cable on the Geforce to the SPDIF port on the motherboard. Is my question, there a SPDIF port somewhere on the motherboard in a Precision T3500? I looked but I have never seen a list of anywhere. Thank you very much for the help!

  Chris

  Hi Chris,

  Thanks for looking in the Precision T3500 computer next and we hope that you don't end up buying one!

  That said, I must not be the bearer of some bad news that this system is not equipped with an SPDIF port on the motherboard. A possible solution would be to buy a sound card has a SPDIF connection and then connect the graphics card to that. Of course, it would take one of your PCI/PCI-Express slots.

  I hope that answers your questions - if there is anything else, please let me know!

• I want to improve my card mother and CPU on my PC. Can I use transfer windows settings for it?

  I want to improve my card mother and CPU on my PC. I like to keep all my settings from my games, etc, so I don't have to buy/purchase new and purchase/buy a new OS Win. I am running Win 7 Pro. What is the best way to address the issue? I keep my OS on a SSD and all the other stuff is on a separate HARD disk. Basically, I need to install the new chipset and other pilots MB.

  You can save files and settings and restore to the new installation of Windows, but the games cannot be guaranteed. Just give a try. If it works, it's fine. If this isn't the case, you must reinstall the games.

• Dell Precision T3500 doesn't work and fans of becomes strong :(

  Hello

  My Dell Precision T3500 work not at all,

  When I run it, the CPU and the GPU fan fan becomes abnormally strong

  And nothing happens on the screen

  And I have this error (3-4) on the front of my case code
  in the user manual, this represents a failure of memory
  

  but I checked all components
  RAM-power - GPU - CPU
  It's all the worknig on my other computer Dell Precision

  I need help :(!

  If the memory is good, and the processor is good, after having tested on another machine, your motherboard needs to be replaced.  Part of the problem may be the processor slot or maybe it's the memory slot (because the first location NEEDS to be filled, it does not matter if the first location is only bad or if they all failed at the same time - if one does not work, no one else can be used)... whatever it is, the only difficulty you a new motherboard.

  If you cannot start your system, you can't Flash your BIOS.

  One last thing, you might try... Remove ALL (readers, cards, extension, mouse, keyboard, etc) the system except for the processor and a barrette of memory in the first place.

  Try another "last" thing... clear BIOS/memory NVRAM.  If there are no jumpers on the motherboard, and then disconnect the system, remove the battery, hold the power button for about 10 seconds, replace the battery, plug in and turn on.

• Replacement card mother Qosmio G10

  After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

  1. second HARD drive internal no more seen.
  2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
  3. always on cooling fan.

  Upgrade the motherboard consisted of:

  1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
  2. loading the CD-ROM TCN0000006 official update tool.
  3. no recovery BIOS or EC/KBC.

  Any idea?

  I m wondering how you did update the information in the DMI?
  As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

  I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
  So maybe his bad card mother

• Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09

  What started it stops early on with the error:
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03

  I have the option to continue with F! that works.
  I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.

  Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.

  Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
  The error indicates this device 01 because of controller 09 conflict
  Have you tested the RAM?

  Recommend doing this! You can use a tool like Memtest or similar.
  Maybe it isn't that a Ram problem and new modules could solve your problem.

• HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6

  So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.

  To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.

  If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.

  Thanks to all who take the time to read/answer

  Drew

  At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.

  You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.

  EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.

  Cards with BIOS double EVGA

  http://www.EVGA.com/articles/00767/

  I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.

  Sapphire video card specifications

  http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

  What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.

  I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.

• card mother Memphis-b: b of memphis

  I bought a new case for my computer, my computer has card mother mephis - b inside and I do not know what pins match the power switch, power led, ect there at - it a model that explains what the pins are what? Help, please.

  Please try the stitching as shown in the graphic below;

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.