Installation DAQmx 9.1.1 with LabView 8.2, but focused on the acquisition of library data do not appear

Similar Questions

• A jpg still print with white lines spaced, but I replaced the color cart.

  A jpg still print with white lines spaced, but I replaced the color cart. Please notify. Thanks in advance.

  Hello

  That's what I feared. This kind of banding appears in images when using normal paper for use with low quality settings. You can try to increase the quality of the prints or try using photo paper.

  A good document to make booklets with photos is the HP brochure and flyer. (C6818A)

• El capitan works with the iPod click wheel? iPod not appearing is not in my iTunes

  Given that I switched to OS X El Capitan my iPod with click wheel does not appear in iTunes when I connect it to my laptop. I can't update any content because it is not recognized in iTunes.

  It should work perfectly.

  See If iTunes does not your iPad, iPhone or iPod - Apple Support.

  Check for fluff in the docking port and if discovered gently teasing with a thin strip of cardboard or plastic.

  Try a different cable.

  TT2

• I forgot my password for user windows 7 with no admin account, but only got the guest account

  I have accidentanly I forgot my user password. But my laptop has no administrator account, just guest account. How can I reset my password with the guest account never? Or can use the disk? Can what type of disc I use? What can I do? Please... someone help me?

  What to do if you forget your Windows password

  If you have forgotten your Windows password and you are on a domain, you must contact your system administrator to reset your password. If you are not on a domain (most of the individuals are not on a domain), you can reset your password by using a reset disk of password or by using an administrator account.

  Create a password reset disk:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-password-reset-disk

  Reset your Windows password:
  http://Windows.Microsoft.com/en-us/Windows7/reset-your-Windows-password

  If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.

  What to do if you forget your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Solutions to common problems with logging on Windows:

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Change your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-Windows-password

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

  Keep secure passwords - Microsoft strategy on move the passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Since the installation of updates for Vista, I can receive emails, but cannot transfer the

  In the "To" box top left of the electronic mail of a box with a red X is displayed under my name only

  Try to compact and repair the database (www.oehelp.com/WMUtil/) and see if it suits it.  Otherwise, check for interference from 3rd party program (see www.oehelp.com/OETips.aspx#3).  You can also try to remove your email account, closing and reopening of WinMail and then add it again.

  Steve

• I downloaded the ISO of Enterprise 8.1 Windows with VM Ware Fusion, but I bought the 8 Win.

  I have a 90 day with the 8.1 evaluation in my VMWare Fusion on my Mac. However, when it expires, it will ask me for a product key. I bought Windows 8, but it came in a file Exe not ISO, so why I had to use version 8.1. My question is that when this 90 day period goes up, then I just enter the product key to win 8 I bought or if I not worth and download the Win 8 Iso now?

  8.0 keys do not work with 8.1.  You must obtain an ISO 8 (or burn one yourself using the EXE program, which will prompt you to create one).

• I have a problem with Canon PowerShot SX 60 Hs-camera with Camera Raw, I can not open the photos taken in raw mode. How can I update Camera Raw? I also tried with Photoshop elements 13, but it was the same thing, I could not open pictures.ts 13 gross

  I have a problem with Canon PowerShot SX 60 HS-vamera wirh Camera Raw in Photoshop elements 12, cannot open raw files. I have the latest version of camera Raw plug in, what is the problem?

  It's on our radar and hoping to incorporate it in a next update.

  As soon as it is available, it will be updated in the article.

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  ~ David

• With Acrobat 9 and XI installed, is the version of Acrobat 9 still not allowed when the upgrade to XI?

  I have an Acrobat 9 Pro Extended and Acrobat XI now in the first instance.  I want to keep both versions installed for development reasons.

  If I activate Acrobat XI with a upgrade key will be my still authorized Acrobat 9?

  When you upgrade to AAXI, you technically replace AA9. Probably not a problem as long as they are both installed on the same machine and don't serve does not extend additional slots beyond the license. However, why have both?

• Longer appears in the taskbar. I want that the taskbar with all the windows open, time, date, etc. should appear when firefox is opened.

  THE TASKBAR APPEARS MORE WHEN FIREFOX IS OPENED. I HAVE NO WAY TO SEE THE WINDOWS OPEN. I HAVE NO TIME, ETC. ALSO THE ADDRESS BAR IS GONE SO I HAVE NO WAY TO ENTER A NEW URL. IT IS SIMPLY THE CONTENT OF THE WINDOW TO FILL. I HAVE WINDOWS XP SERVICE PACK 2, I THINK. RESTORE THE TASKBAR!

  Press the F11 key on the keyboard, you're probably in mode full-screen .

  Thank you

• The jury of ELVIS will work with LabVIEW Student Edition 2010

  Hello

  This question was asked in the forums of LabVIEW, but no solution has been found. I have a windows 7 x 64 machine with LabVIEW 2010 Student Edition. When I try to install ELVIS 3.0.5 traditional software I get the following (no error code) message: "this Setup program requires the LabVIEW 8.5 development system or later to be present on this computer. Development system LabVIEW Base in any version of LabVIEW is not supported. Please install LabVIEW and then rerun setup of NI ELVIS. »

  I also installed the DAQ software for PCI DAQ board. I do not have access to a 32 bit machine and do not know how to get my board work (no ELVIS II) ELVIS. I have provided a screen shot of the message during the installation of the software of ELVIS.

  .

  Hey dduong16,

  Thank you very much for taking the time to provide additional information. After talking with several experts about your system, we concluded that this error is the result of an incompatibility between 3.0.5 Elvis and LabVIEW 2010 64-bit. Even the latest drivers of Elvis are not yet supported by 64-bit LabVIEW: see notes in support of the operating system on the Readme Elvismx 4.2.3

  To solve your problem, you will need to uninstall the 64-bit version of LabVIEW and install a 32-bit version. If you are a student, you should be able to get this version of your computer (it will work fine with your Windows 7 64-bit OS - it will install on 32-bit OS emulated inherent in your system). If you are not a student, please send me a personal message, and we will be working with an account representative to get you the necessary version.

  I apologize for the inconvenience, this made you and appreciate your patience. We have updated the Elvis 3.0.5 Readme to reflect this incompatibility (the change may not appear yet, because it takes time to propagate through our system), and I'm trying to create a Base of knowledge on the subject article to help future users who encounter this error.

  If there is anything else that I can help you, please you after return. Thank you!

  ~ kgarrett

• RS-232 via TCP/IP with LabView

  Hello

  I have currently a standard equipment is read through a RS232 converter TCP/IP hardware.

  On the computer with labview, I use a third-party serial port virtual that data reads the TCP/IP and converts this COM port data pack

  I then read the port COM normally with VISA.

  I would like to remove the third-party TCP/IP software RS232 and LabView read the TCP/IP port and convert to series.

  How could do?

  More details about the hardware and the 3rd party software;

  thydzik.com/Monitor-cms2000-Inverter-via-tcpip-usr-tcp232-E4-rs232ip-Convertor/

  More information on labview here code;

  thydzik.com/log-Solar-generated-to-pvoutput-with-LabVIEW/

  I don't think it's as complicated as you seem to expect. Try the VISA TCP approach. Create a resource of VISA TCP, in raw mode, as explained in the white paper. Take your existing code, replace the COM resource with the new TCP one, remove the configuration of the port series, and it might work. Make sure to close the resource when you stop the program.

  If you want to go with the TCP functions, look at the examples. You open a connection, read and write strings in it, exactly as you would with a serial port and close it when you are finished.

• Cannot bind to the shared object created with LabVIEW 2009

  I have problems referring to a shared library built from a LabVIEW VI under RHEL 5 with LabVIEW 2009.

  To illustrate the problem, I created a VI with a digital input and output that corresponds to a certain number. Then, I created a draft specification of build to create a shared library with a feature that makes use of this VI square. The shared object is created successfully (square.so).

  When I try to compile a test application written in C, that connects to this library, I get errors in the following link:

  cc  -I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintools build/square.so  test.c   -o test/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'collect2: ld returned 1 exit statusmake: *** [test] Error 1
  

  Running ldd reveals that liblvrtdark.so.9.0 is used for the execution of labview.

  In order to investigate on what could be the cause of the problem, I have compiled the nidaqmx basic examples, and I don't have an error. Current running ldd as reveals that he uses liblvrtdark.so.8.2 for the view of laboratory, time of execution.

  My suspicion is that some components of labview are being compiled with gcc 3.4 while others are being compiled with gcc 4.1 (which is the default compiler in RHEL 5).

  Any ideas how I could fix the build errors?

  Thanks in advance for your suggestions.

  PS.

  I enclose a tar file with the source files and here are the details of the ldd:

  ldd build/square.so         linux-gate.so.1 =>  (0x008de000)        liblvrtdark.so.9.0 => /usr/local/lib/liblvrtdark.so.9.0 (0x00b9c000)        libc.so.6 => /lib/libc.so.6 (0x00110000)        libstdc++.so.6 => /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 (0x009a7000)        libm.so.6 => /lib/libm.so.6 (0x00756000)        libdl.so.2 => /lib/libdl.so.2 (0x00256000)        libpthread.so.0 => /lib/libpthread.so.0 (0x0025a000)        /lib/ld-linux.so.2 (0x00b80000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00272000)
  
  ldd /usr/local/natinst/nidaqmxbase/lib/libnidaqmxbase.so.3.3.0         linux-gate.so.1 =>  (0x00e50000)        libnidaqmxbaselv.so => /usr/local/lib/libnidaqmxbaselv.so (0x00248000)        libc.so.6 => /lib/libc.so.6 (0x00689000)        /lib/ld-linux.so.2 (0x00b80000)        liblvrtdark.so.8.2 => /usr/local/lib/liblvrtdark.so.8.2 (0x00e51000)        libdl.so.2 => /lib/libdl.so.2 (0x00813000)        libpthread.so.0 => /lib/libpthread.so.0 (0x001b0000)        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x009c7000)        libm.so.6 => /lib/libm.so.6 (0x00b0a000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x0050c000)
  

  Hi mimi,

  I'm happy to report that I managed to get the code to work. I have included some of the steps I experienced the problem in case it might help improve the documentation or future generations.

  In response to your question about the "error 1" reported by do, it's just an indication that detected a compiler error (it probably resembles the return code of the compiler).

  The errors ' undefined reference... @GLIBCXX_3.4.9 "have been narrowed down. The generated labview shared library, the square.so, links to /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 which is a symlink to usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6.0.9. I decided to compare this version of libstdc ++ that included with RHEL:

  strings /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_3.4.9GLIBCXX_FORCE_NEW
  

  strings /usr/lib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_FORCE_NEW
  

  So libstdc ++ RedHat does not include a string for GLIBCXX_3.4.9.

  With this in mind, I was able to get my test application to compile using the version of LabVIEW libstdc ++ using the following makefile:

  .PHONY: all cleanCPPFLAGS=-I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintoolsLDFLAGS=build/square.so \        /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 \        -Wl,--rpath -Wl,/usr/local/lib/LabVIEW-2009/patchlib/
  
  all: test
  
  clean:        rm -f test *.o
  

  When you try to run the application, I got the following error:

  ./test: error while loading shared libraries: /usr/local/lib/liblvrtdark.so.9.0: cannot restore segment prot after reloc: Permission denied
  

  But apparently, it's because of SELinux prohibiting the use of libraries shared with moving text.
  This can be disabled by running /usr/sbin/setenforce 0 as root.

  The test application now works!

  See you soon,.

  RW

• using NI USB 9201 with LabVIEW Real-time

  Hello

  I try to use a USB of NI 9201 on a remote real-time target. Here's what I did: 1) tricked out of a desktop PC to serve as target RT using the instructions provided on the Web site of NOR. He now starts in an RTOS with LabView RTOS 9.0. (2) I communicated successfully with the help of a host computer that has a windows with LabView 2009 BONE and I installed the software from the computer remote RT target host using ethernet. However, my problem is when I plug NI 9201 USB on the target RT that I do not see the material listed on the devices tab in MAX and interfaces on remote systems. I tried to get the manuals for the HW 9201, but it seems not much explained here, or maybe I'm looking in the wrong places. Any help is greatly appreciated.

  PS: I am attaching 2 JPEGs for additional explanations (tab network settings and the settings of the system).

  Thanks in advance,

  Benoit.

  AVS,

  9201 USB is not supported on RTPCs please visit this link. Currently no usb-DAQ devices do not support an environment CRPC. Only the PCI DAQ devices are supported.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6913

• Sorensen XEL power is compatible with labview

  What Sorensen XEL power compatible with labview? I'm in the automotive field of vehicle dashboard. I want to test and simulate different transient conditions that may generate noise in the pipe I needed of a programmable power supply. Currently I have a NIcompactRIO configuration. I needed voltage output cards higher simulation and test requirements and special conditions.

  I was told that the Sorensen XEL series is compatible with Labview. Is this fair? The other question I have is NIcompactRIO uses IP Ethernet, but Sorensen communication RS 232 communication. Can I have some possible parallel communication with Labview frontend Protocol, controlling all the two from the same unique computer.

  Third, what are the function blocks required in the VI for Sorensen.And programming last but least, where can I get a drivers Sorensen RS 232?

  Nothing in this VI with Ethernet communication so I don't understand what you're asking.

  Rather than add a \r\n with each entry, I recommend you set up VISA to automatically add and I would also recommend that you enable the character to stop playing as well. Then, there was no need for the VISA to the Serial Port bytes and these expectations. Look at the example of advanced series to learn how to set the VISA property to add a termination character.

• How to export the photo graph XY in Clipboard (or file) with labview 6i

  Hello

  I would like to export graphic image XY in Clipboard (or file) to insert it into a word document using labview 6i

  I found the example for labview 8 using invokenode, but not with labview 6i

  

  But this invokenode does not exist in labview 6i: here's what I found in labview 6i

  

  Anyone know how to use this one?

  Thanks in advance

  Wow, had not launched LV6i in a while, never realized how much I rely on the automatic selection of the tool.

  You can wire that call the node directly in the 'write to JPEG File.vi'