installation error Photshop HEEEELP ME PLEASE!

Similar Questions

• I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  Hi BobPryce,

  Please see: 2203 error when installing the Adobe Creative Suite 4 products, 5 or 5.5 or updates

  Kind regards

  Mohit

• VMware Workstation Installation ERROR Please help me

  Installation ERROR Please help me

  

  my system:

  

  Welcome to the community,

  In the error message, I guess you have a kind of endpoint protection software installed, which blocks access to the registry Run keys!

  André

• I tried to update LR CC (2015) on a PC and I get a failed update message. There was an error of installation of this update. Please try again later or contact customer support (U44M1P34). I 'tried' later, but nothing helps... Any ideas?

  I tried to update LR CC (2015) on my PC (Windows 10) and I get a message update failed. "There was an error of installation of this update. Please try again later or contact customer support (U44M1P34). "I"tried"later, but nothing helps... I have also searched the support site but have not met the specific message U44M1P34 id. Any ideas?

  This error comes usually when you move the adobe folder to the other location on root drive and try to update the application. Uninstall the application and delete all files from adobe. Restart your machine and install the application again and check for updates.

• The Lightroom Installation failed: Exit Code: 7 please see specific errors below for troubleshooting. For example, ERROR: DS003... - Summary - 1 fatal Error (s) 0 error (s).

  When I try to install Photoshop Lightroom 6 from the disc I bought from Amazon I get this message: Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DS003 ... -------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 0 error(s) ----------- Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D} ----------- FATAL: DS003: Installer package might be corrupt. Re-download the installer and try again. (Cannot extract 'E:\Win support files\payloads\AdobeLightroom6-mul\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}'. Error: Error 0 ) -------------------------------------------------------------------------------------  
  How can I solve this problem?
  

  The system configuration required

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• Premiere Pro CS4 Setup error - 'the Installer database is damaged. Please contact Adobe Customer Service.

  I had to replace my hard drive and so I had to reinstall Premiere Pro CS4. I tried to do with the files that I had downloaded before, but the installation failed and gave me the error message "the Installer database is corrupt. Please contact Adobe Customer Service.

  I assumed that the files I downloaded have become corrupted, so I opened a session and re-uploaded the files ADBEPPROCS4_LS7.7z and ADBEPPROCS4_LS7.exe. I ran ADBEPPROCS4_LS7.exe and it also failed and gave me the same error message. I tried another download on a different page and got the same error again.

  Can anyone suggest what I can do to get my program installed?

  Error «...» The Installer database is corrupt... "when you install Adobe Creative Suite 4 or point product

• Error - an internal system error has occurred. Please see DXError.log and DirectX.log, during the installation of DirectX.

  Original title: DirectX will not install.

  I blew on it this time, and I completely uninstalled DirectX to attempt to clean install it. Now, it will not install. I get the error "an internal system error has occurred. Please refer to the DXError.log and DirectX.log. "I try to install it again.
  I can't find these two newspapers anywhere, and I'm not 100% sure what to do.

  Hello TheAwesomeJoey,

  Click on item below and follow the instructions to install DirectX.

  Ko ID of Article: 179113 -how to download and install DirectX
  If this does not help, then I suggest that run you a SFC scan to see if there are corrupted files.
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Then try to reinstall DirectX.
  Please answer back with an update on if it solves your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  Hello

  I tried to fix this for hours, I hope someone can help me.

  I downloaded the ISO "Win10_1607_English_x64.iso" (4.29 GB) file and with him came a "info.plist" (2 KB), so they are both on my 64 GB USB Drive (format: MS-DOS (FAT32)) called 'WINSTALL '.

  I have the ISO on the USB key, and it is selected as the ISO image in Boot Camp. I also have the USB the disk of destination selected, and yet I get this error:

  Your bootable USB key could not be created

  Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  I'm currently under OS X El Capitan Version 10.11.6 on my iMac (21.5 inch, end 2012) that is compatible with Windows 10.

  If anyone can help me I honestly love so much, I tried contacting Apple Support staff by phone, they said that they can't do anything, I tried to contact their Live Chat, but none of this has helped to solve the problem, and I tried to look online, but can't find too much.

  Thanks in advance for any answer!

  What OSX Version do you have? This site gives the requirements of Bootcamp: minimum system requirements to install Windows on your Mac with Boot Camp - Apple Support. And you did an upgrade? Could it be that the upgrade will not correctly for the OS?

  Looking at the 10 Windows version you downloaded, is the update of birthday, which was released less than a month ago. It could be that Apple is not reconisgin the Windows version when reading the disk, because it is too recent. I don't know if you have access to the download of the previous generation and do a Windows update?

• A .cab file needed for installation is not reliable. Please check the Cryptographic Services are enabled and that the cab file is valid .__Help! __

  OK, so I need DirectX 0.9 c to the game red alert 3, but I can't on the new directx installed on my computer because of this error
  A .cab file needed for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  have you tried solutions on how to solve this problem posted by mods on the previous posts with a similar problem, but it does not work for me

  help is appreciated, thanks

  Game of automatic encryption Services Cryptography on AutoServices and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Reference: http://support.microsoft.com/kb/822798/ and follow all practices listed in the article.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• Installation error code: 0 x 80246008

  I get an Installation Error Code: 0 x 80246008 when I try to download the update for Windows-why?

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft updates for Windows XP, Office 2007 - Installation Error Code: 0 x 80246008

  I try to install 21 updates from Microsoft Update security.  I get a window that says 'download and install '.  The list fills.  Immediately, I get a screen that says "some updates were not installed."  I tried several times over the last week.  I am running Windows XP and Windows 2007.  Any suggestions on how to overcome this problem are appreciated.  Thank you.

  Here are the updates will not install.

  Installation error error code: 0 x 80246008

  Update security for Windows XP (KB2862152)
  Update for the filter of junk e-mail in Outlook 2007 (KB2825642)
  Update of security suites for Microsoft Office 2007 (KB2760415)
  Update of security for Microsoft Office Outlook 2007 (KB2825644)
  Update security for Windows XP (KB2868626)
  Update security for Windows XP (KB2876331)
  A security update cumulative for the stop bits ActiveX for Windows XP (KB2900986)
  Update for the filter of junk e-mail in Outlook 2007 (KB2850085)
  Update security for Windows XP (KB2893294)
  Update security for Windows XP (KB2892075)
  Update security for Windows XP (KB2893984)
  Update of security suites for Microsoft Office 2007 (KB2817641)
  Update security for Windows XP (KB2898715)
  Update for Windows XP (KB2904266)
  Update of security suites for Microsoft Office 2007 (KB2850022)
  Update security for Windows XP (KB2914368)
  Update of security suites for Microsoft Office 2007 (KB2837615)
  Update of security for Microsoft Office Word 2007 (KB2837617)
  Windows malicious software removal tool - January 2014 (KB890830)
  Update security for Windows XP and Windows Server 2003 (KB2917500)

  I try to install 21 updates from Microsoft Update security.  I get a window that says 'download and install '.  The list fills.  Immediately, I get a screen that says "some updates were not installed."  I tried several times over the last week.  I am running Windows XP and Windows 2007.  Any suggestions on how to overcome this problem are appreciated.  Thank you.

  Here are the updates will not install.

  Installation error error code: 0 x 80246008

  Please see this thread marked as answer that describes a problem similar to yours:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-update-doesn

• I keep getting installation errors that it can't find some files for installation.

  Original title: How can I stop MSInstaller?  I got errors when reinstalling the CA anti-virus software and it continually seeks to install parts of the show.

  I get installaer error that it can't find some files for installation.  Since she cannot complete the task, I can not install other updates, because he wants the other installation before proceeding with a new.

  Hello
   
  What is the full error message?
  
  Please follow the steps mentioned below:
   
  Method 1:
  Diagnose and resolve program install and uninstall problems automatically:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
   
  Method 2:
  How to solve the problems when you install or uninstall programs on a Windows computer:
  http://support.Microsoft.com/kb/2438651

• Installation error code 0 x 80070673

  When I try to install the updates I get this error: Installation Error Code 0 x 80070673

  Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features gradually based on .NET Framework 2.0, 3.0, 3.5 and includes the cumulative upkeep updates of .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates. This combined Service Pack and update applies to versions of .NET 2.0 to 3.5.

  Help, please.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  · What is the security software installed on the computer?

  Here is a link where another user was faced with the same issue and steps suggested by securityguy14 Wednesday, December 30, 2009 12:57 AM helped solve the problem.

  Link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/a3cf9c6c-5be3-4d36-91bb-ed12dc1aa720/

  You can also check the following links: how to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation: http://support.microsoft.com/kb/906602

• Modules of Windows Installer error: 126

  My gateway has Vista Home Premium 64-bit with SP1. Windows updates do not work.

  After doing some research, I discovered that avast anti-virus might have removed TrustedInstaller.exe which I believe may have something to do with the problem although TrustedInstaller.exe is always in C:/WINDOWS/services (that is, as far as I know the correct location). Also, when I open Services (start > Search "Services" > Services) and try to start the installer of Modules of Windows it gives me the error: 126 the specified module could not be found. This leads me to believe it may have something to do with my registry?
  sfc/scannow does not work.

  Ive tried a number of bugs. One was the TrustedInstaller.exe copy from a computer of friends on my C:/WINDOWS/Services
  I have also consulted with similar positions on this site unfortunately, nothing helped. I tried to install SP2 hoping that it would fix, but without the work of the installer of Modules of Windows I couldn't make it work.

  I'm willing to try anything short of reformatting. Restoration is not an option that I do not have a restore point...

  Any help you can provide would be greatly appreciated. Please explain in terms of beginners all the instructions that you may need to solve this problem, as I am little more than a beginner. Google is the only thing that made me this far :-)

  OK people leave your freakout... the answer is and Google can find it. I fixed it on my own.

  My symptoms:

  • Windows update fails
  • Manual installation of the service pack fails
  • SFC fails
  • Windows Modules Installer (aka TrustedInstaller) does not work and returns error 126
  • .. other stuff, I don't remember fails
  • CO_E_SERVER_EXEC_FAILURE error (0 x 80080005)

  I read a number of discussions like this, here and on other sites. I tried the instructions above without success (although I can't be sure that they were not part of the solution). Then, I found this:

  http://www.Vistax64.com/tutorials/282940-Windows-Modules-Installer-error-126-fix.html

  There are a lot of details, written in bad English, with screenshots provided. Here's what worked for me, partially copypasta and partially paraphrased for brevity and clarity:

  I was missing the following registry key:
  HKLM\Software\Microsoft\Windows\CurrentVersion\Component base Servicing\Version.

  To fix:
  1. navigate to C:\Windows\Servicing\Version and read the name of a subfolder. It will be named something like 6.1.7600.16385. It's your ID of TrustedInstaller {}. Copy the name of this folder to the Clipboard (and paste in Notepad to guard).

  2. find a subfolder in C:\Windows\WinSxS whose name starts with:

  x86_microsoft-windows-servicingstack_31bf3856ad364e35_ {TrustedInstaller ID} (Windows 32-bit)

  Amd64_microsoft-windows-servicingstack_31bf3856ad364e35_ {TrustedInstaller ID} (Windows 64 bit)

  Copy the name of this folder to the Clipboard (and paste in Notepad to guard).

  3. create the subkey "HKLM\Software\Microsoft\Windows\CurrentVersion\Component base Servicing\Version". You take possession of the "component based Servicing" and then give you full access permissions before you can create the key.

  4. in the new Version key, creating 'extensible value' using the TrustedInstaller ID as its name and the full path of the folder that you have identified in WinSxS as being its value. Correctly, you must use %SystemRoot%\WinSxS\whatever instead of C:\Windows\WinSxS\whatever.