Satellite P300 - 18 M - HDD to the advanced format?

Similar Questions

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Bluetooth on Satellite P300-1BB capable of managing the A2DP?

  Is the Bluetooth on the Satellite P300-1BB able to handle A2DP (Advanced Audio Distribution Profile)?

  Yes, each with Bluetooth and the last bluetooth stack Toshiba laptop supports

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• Satellite P300-1BB - BT can handle the A2DP?

  BT is integrated on the Satellite P300-1BB capable of managing the A2DP?

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39212&TSTART=0

• Re: Satellite P300 PSPCCE - wakes up to the top by itself

  My Satellite P300 pspcce starts to turn more * on * after I manually dump it * off *.
  This happends in the minute following the judgment.

  I started noticing this after that I installed my wireless card, I turned the wake on lan/wlan function * off * in the Bios. But it does not help...

  Before installation of the Wlan card the computer woke up from his sleep too, but not when it was closed.

  I looked in properties of the Wlan card but I couldn't find any wake-up function.

  Any ideas where to look next?

  Hello

  As far as I know THAT BIOS includes more options wake up; so I also recommend disabling these options
  Wake on keyboard
  -Battery clock criticism
  - and Wake-up on LAN (but it seems that you have already disabled)

  In addition, the LAN card support a wake on LAN function in the own properties.
  You should check this in the Device Manager-> properties-> Advanced tab LAN card.

  Also, I read that it automatically updates windows could wake the portable computer too. Try to disable the receipt of the update and check if it would improve your situation.

• Re: Satellite P300-150 and HDD upgrade

  Hi, my wife Laptop(P300-150) has developed a tick unit HDD1 - I would like to replace this 250 GB drive with other, larger capacity HARD drive. So my question is twofold

  (1) what is the maximum size of disk HARD of this laptop can tolerate? -500 GB?
  (2) does it matter if I buy a SATA - II - when the original disc in a SATA drive?

  Thanks in advance
  IMM

  Unfortunately there is no document where you can find this info on the maximum capacity of the HARD drive that can be used with the Satellite P300 but I m 100% sure you can use 500 GB on Satellite P300.

  I don't know if your laptop has a SATA II controller but, as far as I know, SATA II is backward compatible and I think you can use it on your laptop, but it runs with SATA that access speed.

  Upgrade disk SATA I HARD and you will be happy with it.

• Satellite P300-220 - yellow exclamation on the sound card

  Hello

  I just lowered my Satellite p300 to XP pro, but it seems to me that I now have some problems.

  -First of all, in Device Manager, I have a line "Audio device on Bus High Definition"with a yellow"?" and a «!» I installed the audio drivers and kb888111xpsp2.exe execution but that did not solve the problem, this line does not disappear.

  D ' other hand, when I click on "my computer > properties" it is written that I had 2, RAM 96Go, but normally I have 4 GB. Is this normal? I'm a little afraid to see it and not know what to do.

  Can someone help me?

  Thanks in advance.

  You must install Microsoft patches:
  -KB888111
  -KB835221

  But these fixes are also part of the SP3!

  In order to solve your problem, you need to remove the audio driver and the sound card in Device Manager. I then have to install SP3.
  After SP3 has been installed, you can reinstall the sound driver

  It is important that the pilot would be installed AFTER the SP3

• Satellite P300 with XP hangs at the screen "starting windows."

  I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

  When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

  Thank you

  > There was an ASP.NET account, and he disappeared after the update of the BIOS
  The whole story is really strange

  I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
  Then install all service packs, hotfixes and patches of the XP!

  Simply show words on XP on P300.
  A friend of mine has installed XP on a P300 yesterday too and the XP works well
  Everything works fine!

• Satellite P300 - poor sound quality using the Dynadock

  I have a laptop Satellite P300, Vista and a * Dynadock VBI * port replicator.
  Except for the audio part of the dynadock works very well.
  I can edit on 2 screens.

  However, the sound is horrible. You can hear only fragments distorted healthy eating and a white noise.
  It takes the dynadock software, because the sound on the laptop is OK and if I connect speakers (Logitech) directly to the laptop, there is no distortion.

  I already downloaded the latest drivers from Toshiba, removed the old software and reinstalled with the new drivers.
  Technical support from Toshiba didn't have an answer.

  One of do you?

  Cordially Frac

  Perhaps there is a ground loop?

  If you remove the power supply of the laptop so its just running on battery, still doing?

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Satellite P300 - 271 - how to replace the keyboard?

  Hello
  I have a Satellite P300 - 271 and there are a few damaged keys. I bought a new keyboard for this laptop.

  Is there a caraa how do I replace the keyboard?

  Greets, Benjamin

  Hi Benjamin,

  As far as I know that these manuals are not for the public. Technicians certified for laptop only can download these manuals. You can download the normal user manual that came with your laptop.

  A friend told me to replace the keyboard to remove the keyboard first, support but it s fixed by screws on the underside. After that, you can remove the keyboard but be careful with the cable.

  Disassembly of the laptop is a little tricky. If you n t have experience with that you should ask a technician for laptop help.

• Satellite P300-1GN: greenish tint in the upper left corner of the screen

  I recently bought a Satellite P300-1GN, best laptop, I have ever bought!

  I booted up one morning to find a greenish hue in the upper left corner of the screen, at first I thought it was a graphics issue, but after looking closely, saw there was a line of crack/straight lines in the screen itself.

  Fig 1: [http://onfinite.com/libraries/1506419/600.jpg] sorry for the bad quality, camera phone.

  Photo 2: [http://onfinite.com/libraries/1506420/600.jpg]

  Then I had a glance at the back of the laptop to see if there was marks, see if something had been abandoned or struck, but no indication of that.

  Now the crack grew, and instead of going down, it goes right through the screen :(

  Photo 3: [http://onfinite.com/libraries/1506421/600.jpg]

  Could anyone help as to what could be the cause, and if it is covered by the standard warranty 1 year?

  Hello!

  To be honest, I've never seen such a display problem, but for me it seems to be a malfunction of the internal display. Looks like the internal display is broken somehow

  I think that in this case you need professional assistance from an authorized service provider. Technicians can check the display and tell you how it happened I think.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite P300 - is - it normal that the buttons CD/DVD turns on the laptop?

  Hi all

  My laptop is Satellite P300 - PSPCCE. I noticed that if the laptop is off and press the CD/DVD function it turned on and play Windows media player.

  My question is - is this normal, and if this normal how to disable this option?

  Thank you

  Hello

  It's definitely normal. It's not on the new Satellite P300, but also on the old models of laptops with these buttons.
  To be honest I don't know that I don't know if you can turn it off. Either the buttons are in use or not, but, as far as I know, there is no option where you can disable this option to boot the laptop but then use buttons located under the operating system.

  I'll test it on my Satellite A300.

• Satellite P300-173 never off when the ethernet cable is plugged or WIFI

  Hello

  I can't stop my P300 correctly.

  Whenever the ethernet cable is plugged or wifi is connected, stop work until the screen goes black but the power remains on: fan, always active LEDs. The only way to stop then is to press the power button.

  As the network is always connected, it's really annoying.

  Can you please help?

  Thank you!

  ER

  Hello

  Very strange problem
  First have you checked if you use the latest version of the BIOS?
  Please check this!

  On the European driver Toshiba page you will always find the latest BIOS and divers.

  Secondly, I would recommend disabling more upward on LAN option in the BIOS and in properties (device-> LAN properties-> Advanced tab management) LAN card

  Check if this may help solve this problem