installation in safe mode

Similar Questions

• Windows cannot complete the installation in safe mode

  I really need a help.

  I just bought a samsung series 5 ultra-thin with AMD and windows already installed sound 8.
  And suddenly my laptop was showing a notification to the black screen that says: "Windows is unable to complete the installation in Mode without failure. To continue installing Windows, restart the computer.
  There was only the OK button. And after I press the OK button, my windows will restart and keep showing that the notification. Even I try to turn off my laptop with power button / stop, its still impossible return to normal mode.
  The windows keep again and again, reboot
  Anyone know how to get back to my normal mode? Please help me.

  Hello

  I just realized that you cannot start to access msconfig... I'm sorry.

  If you have a Setup disk, repair disk or USB flash, you may be able to access the command prompt and enter a command to disable Secure Mode...

  You have a possibility to do a repair on the POST screen before Windows tries to start...

  You may be able to quickly hit Ctrl + Alt + Delete at the end of the POST right to start an auto repair.

  It might take three tests...

  You must get to the command prompt (.cmd)

  (1) start from the Windows 8 DVD or any other method available...

  Steps 2, 3 and 4 may not be in order, depending on how you start...
  2) click Next
  (3) select repair your computer

  (4) select troubleshooting
  (5) select Advanced Options
  (6) select command prompt

  This link gives instructions on what to do when you receive a command prompt...

  http://www.bleepingcomputer.com/forums/t/423290/Windows-7-boot-to-safe-mode-reboot-loop/

  The statement to the command...

  /deletevalue {GUID} safeboot bcdedit where {GUID} is Windows 7 loader GUID.

  {GUID}   refers to the "identifier" listed under a Windows boot loader that appears after entering bcdedit/c.

  In their example, entry to the so command prompt...

  /deletevalue {96378fc1-9402-11e0-990d-e3ec25d51f78} safeboot bcdedit

   

   
  

• computer won't start rest in game up to begins services then I get a pop up window: 'windows cannot complete installation in safe mode.

  I did a clean up to my acer with no CD, but now it never starts he gets stuck in starting the services and then a window opens stating windows can't install in safe mode. to continue installing windows, restart the computer, but I have tried in all modes of security different but nothing.

  can you help me

  Hello

  You try to perform the factory restore?

  We do not recommend factory restore, because by the factory restore, you will lose all the data present in the computer. Factory restore will restore your computer to factory settings.

  I suggest that disconnect you all external devices except the keyboard and mouse, and then restart the computer. Leave the computer to complete the process and do not touch anything until the process is complete.

  If this does not help, then it would be best to contact Acer to get help.

  Support from Acer: http://support.acer.com/us/en/default.aspx

  Hope the information is useful.

• Vista computer displays "installation of Update step 3 of 3.0% completed, do not turn off" then turns off. This happens constantly .__Starting in safe mode does not disturb this cycle.__What do? tried to delete and reinstall memory.no joy.

  No recent changes to computer
  have you tried booting in safe mode
  I tried to remove/reinstall the memory chips
  don't have a recovery disk

  Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2; Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Previous discussions (including answers) about this behavior: http://lmgtfy.com/?q=site%3Asocial.answers.microsoft.com+%22stage+3+of+3%22+%220%25+complete%22+vista

  Assuming that Vista and SP2 is not installed...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Repair the installation in Windows XP safe mode: Posible?

  Nice day

  I'm working on my computer that has Windows XP Professional, after having removed the old version of Norton 360 and reinstalled the One updated. My computer keeps restarting every 2 seconds in Normal mode. I can boot into safe mode and safemdoe with networking. I checked the event log and it gives me this: error code 0000001 a, parameter1 00041785, parameter 2 c0e00000, 81c544c0 parameter3, parameter4 00000000. Is there a resolution to this? or can I make an instaollation of repair windows XP in safe mode?

  Thank you

  If you are unable to do things, I asked, I think your best course of action is to make sure that all your data is backed up safely (there are methods to get there, even if you cannot start in Normal mode), and then perform a clean installation correct.

• Windows XP Installer does not not for updates or MS Office 2010. Error says Safe Mode, but I'm not in it.

  Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.

  When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.

  I can automatically download updates and they seem to be installed, but all fail at the end.

  Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.

  Thanks in advance for any ideas.

  Hello

  1. What is the exact error message that you receive?
  2 have you made changes on the computer before this problem?
  3. all of the updates fail to install?
  Method 1: Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.
  (b) click the Windows Installer service, and then click Properties.
  (c) if the startup type box is set to Disabled, change it to Manual.
  (d) click on OK to close the Properties window.
  (e) right click on the Windows Installer service and then click Start. The service should start without errors.
  (f) click on the file menu, and then click exit.

  Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
  http://support.Microsoft.com/kb/315353
  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)
  Method 3: You can also download the latest version of Windows Installer from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  Reference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602
   
   
  
   
   

• I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

  The Windows Installer

  I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

  Hello

  -What you have done to try to solve the problem?
  -Did you change on your computer due to which the question has begun?

  I recommend you follow the steps in this article and see if the problem still occurs.

  How to solve the problems when you install or uninstall programs on a Windows computer.

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• Unable to start XP in safe mode, stuck at mup.sys; BSOD with installation disc

  My computer is a computer laptop Asus eeePC 1000H with no material changes and default OS. I left the machine all night and came to see the machine with the error text:

  "Reboot and select proper boot device."
  "or Insert Boot Media in some boot device and press a key.

  Restart in safe mode gave me the same error, except that I could see that the boot process failed at mup.sys.

  Then I tried to repair my installation by using a Windows XP installation disc so I could use the Recovery Console, but I got a BSOD and error:

  STOP 0X0000007E (0XC0000005, 0XF75DE0BF, 0XF7A2A208, 0XF7A29F08)
  PCI.sys-address F75DE0BF base at F75D7000 Datestamp 3b7d855c

  I have turned off unnecessary equipment in the BIOS and still have the same result. The next step here is to erase completely the machine and retemplate TI - something I'm eager to avoid.

  I've been surfing on support forums all morning and I noticed that there is a spike in people with this problem. Is there a virus going around or was there a windows update last night? I use McAfee if it makes a difference.

  From your description of the problem, it sounds like the hardware failure, no software (virus). First test the drive and RAM. Since you don't have a CD player with eeePCs, you need to use bootable USB based on keys of an external optical drive or troubleshooting tools. Or, if the computer is under warranty, contact Asus support.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).
  MS - MVP - Elephant Boy computers - don't panic!

• Windows Vista "Windows Installer service could not be accessed. Windows can run in safe mode or Windows install not installed correctly. »

  * Title *.
  Windows Installer not properly installed

  We just bought a new Dell with Windows Vista.  I tried to download i-tunes and I get the following error: could not access the Windows Installer service.   Windows can run in safe mode or Windows install not installed correctly.  I am not running in safe mode it should be setup of windows.   I am trying to install iTunes 8.0.2 Windows Vista 64-bit.  I found the info to repair Windows XP, but nothing for Vista.  Any help would be GREATLY appreciated.  I'm so frustrated.  Thank you.

  Hi BradandKim,

  We will try to start the Windows Installer service and see if that helps.

  • Click Start orb
  • Right click on computerand then click Manage.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • In the console tree, click Services and Applicationsand then click Services.
  • In the details pane, right-click Windows installand then click Start.

  Let us know if that fixes the problem.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can only start my computer in Safe Mode - system hangs on startup after installation of updates

  Original title: UPDATES DOWNLOADED PROBLEMS to START NORMAL, MUST LOAD IN SAFE MODE - LOST AFTER 30-40 SECONDS VIDEO

  After the download and installation of updates on my desktop Gateway (FX7020) the computer freezes on me and was forced to shut down hard. After a few attempts to start the computer, I was able to get into safe mode. After some time in the exploration of the event viewer I tried out and re-start of normal BONE. I was unable to make it through the boot sequence and had to shut down hard again. I waited a while and it made back in safe mode, but this time after 25-40 sec. I lost the video, the mouse, the keyboard. Everything was running. I've read a few articles and I hope that I don't have a F... THE OS.

  Thanks any help will be graciously appreciated... RA

  Hello

   
  Method 1:
  You can try restoring the system to safe mode and check:
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  You can consult the links for:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  
  Method 2:
  If the problem persists, you can refer startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• Several update failures, sfc scan in safe mode not working do not with a WRP, new error 80070570 installation error. USB installation failure...

  I don't know why but it questions

  (1) the win 7 install dvd (retail), it comes with an error 80070570
  (2) Usb key with win7with sp1 do not fare any better either
  (3) several chess update with error with no. support messages either.
  I tried all known and a few new patches, it comes
  Scan of SF,
  Hot Fix
  Update device drivers
  RAM memory modules
  Repair installation
  Recovery Console
  Safe mode startup
  Isolation of CBS newspaper.
  Reformat and reinstall at least 20 times on 3 separate hard disks
  MB reset
  Incremental update
  SP1 iso dvd and usb stand-alone installation
  Check disk and every known, all make mistakes recovery console on NEW and OLD INSTALLED IN WIN7
  Distribution
  Virus on, defender of victory off the coast
  Safe mode / with all combinations on
  Microsft onseven and support forums
  I'm starting to think that this could be a deliberate attempt to make me go buy win8
  I need help please
  Krish

  Hello

  1. the Microsoft updates you aren't able to install?
  2. What is the accurate and complete error message you get?
  3 have. what troubleshooting measures you tried to solve the problem?

  I suggest you try to install the updates to the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• New installation of Windows 7 translates speeds very slow of the internet. Works in safe mode.

  3 weeks ago, I installed windows 7.

  For some reason, internet is super slow. I noticed right away because the download of the updates took forever. I thought it was because I need to install the NIC drivers, so I only have the first. It didn't fix it. Then, I searched and tried everything I could find online. The only thing that did work was that if I boot mode safe mode with network speed is very well .

  When I discovered that, in safe mode, everything was fine, that I started to disable any service that relates to networking. (As the Base and support Ip filtering engine, etc) This does not solve it so I decided to try the oppisite I started in safe mode with network and then loaded to the top of msconfig and any service that was not running in safe mode, I turned off. Thinking that I start one by one and find out what service was slowing downloads. When I booted in normal mode, the download speeds were still broken.

  So I continued then to disable services, I disabled all services which have to do with networking, and to enable windows.  (Things like the service that launches programs. Yes, any program that has not been opened I could not open.) Accordingly, I have concluded that it was not all services.

  This is a new installation, so I only installed firefox and flash. (no flash for the speed test) no anti-virus, etc.

  Here are a few screens of speed trials. These are actually kind of funny because the download is so fast that downloads.

  It is in safe mode with network speed. http://imgur.com/7VJvt

  It's the speedtest in normal mode, http://imgur.com/dDp5B

  So here's what I tried.

  • disabled auto-tuning
  • disabled IPv6
  • turned off homegroup
  • reinstalled drivers
  • drivers uninstalled (for default windows drivers)
  • Install different drivers (installed a game on the asus site) and the other on the nvidia site
  • disabled many services to many-on-list really out.
  • disabled Windows defender and windows firewall.
  • I bought new RAM with the win7 update so I tested to see if the RAM was bad. I ran Memtest86 + and it failed. So I took the new RAM and he run and all past. Still doesn't solve it.
  • I reinstalled.
  • I installed another network card.
  • I installed another version of Win 7. (Installed Win7 professional first and after Win7 Ultimate)
  • reinstalled the drivers again.
  • Disable all of the services.
  • A run anti-virus programs. To make sure that there are no viruses. There are not.
  • I connected directly to my router.
  • All the latest windows updates installed.
  • Checked online to see if my hardware is compatible with Win7 http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=ASUS%20P5N-D%20ATX%20-%20nForce%20750i%20SLI%20Motherboard&v=ASUS&uid=P5N-D%20BULK&l=en-US&pf=0&pi=0&s=P5N-D&os=64-bit
  • Made sure my router had the latest version of the firmware. There not then I upgraded to V1.9 and it has not solved the problem.

  Here is some information on my hardware.

  Processor: Intel (r) Core (TM) 2 CPU Quad Q9400 clocked at 2.66 GHz, Intel64 family 6 model 23 Stepping 10

  Number of processors: 4

  RAM: 4 000 MB

  Graphics card: Standard VGA Graphics adapt, 5 MB (have not installed my NVidia 460 drivers yet.

  Hard disks: C: Total - Mo 476929, Free - Mo 454276; Total D: - Mo 194466, Free - 20325 MB;

  Motherboard: ASUSTeK Computer Inc., P5N - D, 1. XX, 123456789000 (NVIDIA nForce 750i SLI)http://www.newegg.com/Product/Product.aspx?Item=N82E16813131232

  NETWORK card: NVidia nForce 10/100/1000 Mbit / s

  Antivirus: no

  Router: D-Link DGL-4300

  I asked the guys more Hotmail.com for help. Here is the result. http://forums.techguy.org/Windows-7/975115-Windows-7-fresh-install-results.html

  So I pray that you guys can help me with this. I have no idea what to do next. Help, please.

  Thank you.

  FIXED!

  So I gave up and gave my computer to my friend at home and take a look. He brought me.

  What did do? He went out and bought a new network card. I guess that despite the windows NETWORK card drivers 7 I installed windows for some reason any dislikes the network card. (NVidia nForce 10/100/1000 Mbit / s) It is built in the nice for the card mother P5N - D.

  The funny thing is that 3 1/2 weeks, when I had the problem. I asked him what he thought and he said to go out and buy a new network card. When I hesitated to do so, he said he would buy the NIC if it did not work.

  In any case, I hope this helps someone maybe who has the same problem, I did.