Installation of computer desktop hpe Series USB card

Similar Questions

• Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

  Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

  roches28,

  According to the specifications , it is an IEEE 1394 (aka Firewire 400) 6wire.

• Memory card not seen by Windows XP computer using the USB card reader portable

  I use XP SP2 and have recently had a problem where my laptop does not recognize a card of memory a camera when the USB card reader is connected. It automatically launch an Adobe image management application, but I think that the operating system would still see the USB card reader.

  Hello BSW58,

  Thank you for your message.  We will try to take a look at your AutoPlay settings.

  Plug your camera card.
  Conclusion Adobe once it opened.
  Click 'Start' > click 'my computer '.
  Right click on your card > select ' Autoplay > Adobe is listed as default application?  If so, you can change it here.

  Please let us know if it did or did not help to solve your problem.

  Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• I have a HP Pavilion HPE h8-1020 desktop PC which firewire card must be installed

  I have a HP Pavilion HPE h8-1020 desktop PC, which firewire card can I install?

  This widget could not be displayed.

• Installation question on Satellite M30 PSM30E USB mass storage device

  Hi people,

  I get an error message when I try to install new hardware on my laptop. Windows XP is trying to find the drivers and then comes up with the following error after a few minutes. The software starts to install but then comes with the following text:

  "There was a problem installing this device:"

  USB mass storage device
  An error occurred during the installation of the device
  These data are incorrect

  What happened with a USB card reader and my mobile. Once I have the error box I get a message saying that the device will not work properly?

  Anyone has any ideas at all?

  See you soon

  Hello

  What series of notebook or laptop model do you have?
  Could you please put the whole number? It would be very useful for further study.

  All the installation driver Toshiba must be made in the right order.
  In most cases, you would find a txt file of installation instruction on the Toshiba driver page.
  You must follow these instructions to ensure that all drivers would be executed correctly.

  Concerning

• HP320 - 1120 m Desktop TS: change USB 2 ports tonUSB 3

  I wait fault to get an external drive which works on USB 3 ports & I don't have USB 2 ports. Can I change from 2 to 3 children? My product number is A5W91AV #ABA.  I have a generic card USB. I don't know what other information you might need.

  HP320 - 1120 m AIO.
  10 Home 64 bit Windows
  Product # A5W91AV #ABA
  CPU: AMD E2 - 3200 APU with graphics Radeon (TM) HD
  Motherboard: Pegatron Corp. 2ACB version 1.03
  BIOS: FRIEND worm: 04.06.04
  Memory: 6 GB
  Wireless network
  465,76 GB Hitachi SATA drive
  NTFS
  BK peripheral backup USB Seagate +.
  HP Officejet Pro 8600 AIO printers
  Series of printers HP Envy 100 D410

  @mkj3757

  I have to admit that I made a mistake somehow.  After reviewing the specifications of your computer again, it seems there are 2: USB 2.0 on the side of the computer and 4 ports: USB 2.0 to the rear ports.

  I shopped an option that might work for you.  I contacted StarTech to see if they had any ideas.  This is the only option they could offer:

  http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-mini-PCI-Express-USB-3-adapter-card-with-bracket-Kit~MPEXUSB3S22B

  It's a long shot, but if the cable can be routed off the case someway, it could possibly work.  You can communicate with them with to get help.

• Pavilion HPE series, LP028AV # a: Windows has not started, but ended up with Recovery Manager without control

  When I started my desktop computer, Windows did not come to the top, and then he came to the Recovery Manager window. So, I wanted to select System Recovery, but the wired keyboard seemed to be locked and so was the wired mouse.  No selection is possible on the window. Please help me to unlock the keyboard in order to proceed to the recovery of the system or to correct the problem.  I also tried to restore the system from the recovery disks, but the keyboard and mouse have been locked as he came to the Recovery Manager window. Here it is a little recap of my office-info:

  Product name: Pavilion HPE series

  Product number: LP028AV #ABA

  Model number: h8 - 1070t

  Thank you for your help in advance.

  Jay

  Hello.

  After replacing the batery, I got a black screen. But I discovered that the cable from the monitor was not completely connected after that I moved the PC and the monitor. Once I fixed and restarted the PC, keyboard and mouse are animated.  I'm currently running System Recovery.

  Thank you for your excellent support as well as your patience.

  Jay

• e9105z Desktop: Add a USB 3.0 Port

  I have a desktop computer HP e9105z with a motherboard of Paragon. Recently, I bought Linx mint on a USB 3.0. I installed a PCIe 3.0 Insignia guest card and tested OK 2 ports with a USB 2.0 stick. I asked the 'seller' uses the Molex connector. Says that does not need to use. Now after reading about the topic (I should have) I understand because of the intense charged with disk i/o, cameras, etc., I have to plug the connector on any available of the powsupply Molex connector. Previously, I have improved the 350w at 700w power supply. I need connect the PCI card to the power supply? The USB 3.0, I'm going to use a passage of up to 300mbp. How can I check it's speed, I'll get out the PCI card? Thank you

  If the pci expansion card has a port of Molex, it is there for a reason. By all means plug in the power to it, notwithstanding any other advice. Why would you not? The speed you get out of the usb card will depend on the connected device and several other factors. Linux has a very informative file transfer interface that will give you a reading of the current transfer speed, can be started and stopped, like similar Windows 8.1 etc. But I guess I understand that you can run Linux Mint on the memory stick, right? Linux has a lot of comparative analysis tools available. HDparm is one:

  http://www.shellhacks.com/en/HOWTO-test-read-write-speed-of-a-hard-disk-in-Linux

  Just boot Linux from the 'Live' stick and then test the speed of read/write to the hard drive with one of the tools for benchmarking. I doubt constantly, you will get 300 Mbps, but you should get much more important than usb 2.0 that would maybe 40 MB/s. You will probably get as 120 Mbps.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Pavilion p7 - 1017c: Add USB card

  I would like to add for Pavilion p7 - 1017c Desktop USB card so I added USB ports.  Looking for a recommendation on the expansion USB card should I buy.

  @JeanM-10, welcome to the forum.

  Here are a few additional cards to the StarTech that will work for you.  I suggest you contact their Technical Support for help to choose the best card for your system.  I've used several times their Live Chat option with very good success.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Desktop HP-H8-1110: Card Reader H8-1110

  Hello, I upgraded the OS from W7 to W8.1 and my card reader 15-1 has stopped working. I don't know if it was a coincidence or a compatibility problem with W8.1, whether, I bought a replacement card reader and thinks that I need a SATA cable and would appreciate help to advise me which cable I should i.e. 7 red pine series of card mother SATA hard drive HD Signal data cable, SERIAL ATA HARD DRIVE SIGNAL HD SATA DATA CABLE Serial ATA adapter SATA S - ATA cable data,... to connect the replacement card reader?

  Thank you

  Lin

  According to the card reader that was purchased, I suspect it uses a connexionUSB header, and not SATA.  If the existing card reader is always connected to the motherboard, simply plug in a new USB empty header.  A picure of the motherboard can be found HERE.  Just check that yours looks like.  Header USB connections are along the lower edge of the motherboard (pictured).  I see that your card mother peut having a special connctor for the card reader

  just above the SATA, labeled Mini ports Card pictured, I've actually seen that before

• USB card reader does not detect memory cards

  memory card

  I do not have a slot for memory card but I have a usb card reader, but it just recently stopped reading all my memory cards? What should I do?

  Hello

  If you can't get the working card reader, you can use a card reader that is
  not expensive.

  -------------------------------------------------------------

  To check your version of Windows.

  Check with the manufacturer of system and their forums (if any) for known issues.

  Your other USB devices work?

  Try a system restore to before the drive stopped working if possible.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

• Transfer pictures to the computer, back to the camera card

  I would like to transfer photos, Windows Photo Gallery, or my folder of images, from my computer, on a camera

  card.  I am currently operating with Vista.  Is this possible?  If so, how?

  Hello BrendaKS,

  Your camera has an SD card or you store the pictures in your camera memory?

  If the device has a SD memory card then you must place this memory card into the reader on your PC. All you then need to do is to copy the photos you want to transfer to your camera and then paste them into the SD memory card.

  If your device does not have a SD memory card then you will use the cameras memory to contain the new photos. This will reduce the amount of memory that you have to take new photos and eventually, you run out of memory and you will need to copy the photos to another storage device.

  If you use just the computers memory, then the camera should have a USB lead that attaches one end to the camera and the other end to the USB port on your PC to enable you to transfer data between the two.

  However, I am assuming that your PC has a SD memory card that stores the admissions.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• my ex loaded my computer data on his USB stick can it access my computer from his computer?

  my not my ex husband is bitter about the divorce.  He put my computer data on a USB key, it took him several days to do this, it is geek.  I have an icon on my desktop (lower-right on bar) that says USB manager and turned the RED yesterday. the two are connected and it is able to access my computer?  I think I am spied by him through my computer and I need to take action if this is the case.

  Hello

  "He put my computer data on a USB key, it took him several days to do this, it is geek.

  It does not take many days to put your data on a USB key.

  All we can offer is that you save your data and reinstall the operating system.

  If you continue to think that it spies on you, contact your local agency.

  See you soon.