Installation of default because of invalid packets

Similar Questions

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Why Tempro 3.3.3 "Installation ended prematurely because of an error"?

  Hello Forum,

  I have a Satellite L500-1XD running windows 7 64 bit. I _had_ tempro 3.0 pre-installed when I bought first mar 10 satellite. for months, I ignored the tempro update requests to tempro 3.3.3; until today. so, I downloaded from [here | http://eu.computers.toshiba-europe.com/tempro/ToshibaW7TEMPRO.zip | http://eu.computers.toshiba-europe.com/innovation/generic/TEMPRO_W7_RELEASE/].

  When I run the TEMPRO_3.3.3.exe file, I got the "Welcome to Toshiba TEMPRO Installation Wizard" window as expected. but then when I clicked the button 'Next', I got a 'Fatal error' dialogue box that says "the Installation ended prematurely because of an error".

  I searched this forum for a solution and found [this thread | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=167329 |] Satellite P100 fails to install TEMPRO 2.0.3] who advised the original poster to uninstall the previous version. so this is what * i * made. I uninstalled version 3.0 work of Tempro, which is preinstalled. but when I tried to install 3.3.3 once again, I got the same "Installation ended prematurely because of an error"! now, I don't have tempro at all!

  Please, can anyone help with advice on what to do to get this thing installed correctly? I found a corresponding entry in the windows 7 (see below) event viewer if it is of no use.

  Thanks in advance for your help.

  =================================

  Event properties

  General tab

  Windows Installer installed the product. Product name: Toshiba TEMPRO. Product version: 3.33. Product language: 1033. Manufacturer: Toshiba Europe GmbH. Installation success or error status: 1603.

  =================================

  Event properties

  Details tab

  -System

  -Supplier

  [Name] MsiInstaller

  -EventID 1033

  [Qualification] 0

  Level 4

  Task 0

  Keywords 0 x 80000000000000

  -TimeCreated

  [SystemTime] 2010-10 - 29 T 23: 25:17.000000000Z

  EventRecordID 67671

  Application of channel

  Computer *.

  -Security

  [User name] S-1-5-21-3117272653-2424292012-3940679202-1001

  ================================================== ==========

  -EventData

  Toshiba TEMPRO
  3.33
  1033
  1603
  Toshiba Europe GmbH
  (NULL)

  7B44424237303231412D333433372D343436462D414345352D 303030303135663933366262 66613039636634636236336531616535393861636632316330 30303030393034 3732363136343441393732437D

  Binary data:

  In the words

  0000: 4242447B 31323037 34332D 41 342D 3733
  0008: 2 463634 35454341 34343631 3632372D
  0010: 30307 32373941 43 35313030 36333966
  0018: 61666262 66633930 36626334 61316533
  0020: 38393565 32666361 30306331 39303030
  0028: 3430

  In bytes

  0000: 7 B 44 42 42 37 30 32 31 {DBB7021
  0008: 41 2D 2D 33 34 33 37 34 A - 3437-4
  0010: 34 36 46 41 43 45 35 46F-ACE5 2D
  0018: 2D 37 32 36 31 36 34 34 - 7261644
  {0020: 41 39 37 32 43 7 30 30 A972C D} 00
  0028: 30 30 31 35 66 39 33 36 0015f936
  0030: 62 62 66 61 30 39 63 66 bbfa09cf
  0038: 34 63 62 36 33 65 31 61 4cb63e1a
  0040: 65 35 39 38 61 63 66 32 e598acf2
  0048: 31 63 30 30 30 30 30 39 1 C 000009
  0050: 30 34 04

  I downloaded Tempro following your link and installed successfully on Satellite A660 and Satellite P500 time preinstalled with Win7 64 bit.
  None of the error messages and installation has been completed correctly. I started Tempro, accepted the privacy policy and it started without any problems.

  So I really don't know what's wrong on your laptop, but try to remove Tempro (if it is stil there) and run CCleaner to clean up all the registry entries and try to install it again.

  Is that 3.33 Tempro is offered on all new models of laptops and can be installed more so there must be a problem on your laptop.

• RT2870 automatic installation service has reported an invalid current state 0.

  This is my first posting, so be gentle with me

  I discovered that each Windows session seems to result in a record of the event (Event ID 7016) with the description Viewer:

  RT2870 automatic installation service has reported an invalid current state 0.

  I understand that maybe it's something to do with my broadband connection or USB wireless adapter Tenda I should use, but as a non-techie, I'm not really sure.   And I do not know what is the function auto-install RT2870 function is supposed to have to pay.

  Can someone explain how I can deal with the error, please

  Thanks TwoPointOh.

  As the error messages appear do not indicate a problem serious or critical, I'll follow your suggestions at your leisure.

  And thanks for the tips and suggestions.

• Message at startup: "job cannot be run because of invalid destination."

  I have purchased HP recently, new with Windows 7. Now, after only a few months, start I have a message on the screen that reads, "Job cannot be run because of invalid destination". It gives you the opportunity to click 'OK' or 'Cancel', but gives no other details. I always just click OK and continue in my day, but it happens every time restart us the computer. I don't see other problems that could be linked to the message. In any case, help would be appreciated if someone knows this problem.

  From Internet Explorer

  Original title: MESSAGE ON BOOT UP

  Here's how you can find what it is:

  1. Click on the starting planet
  2. Type the word msconfig in the search box and press enter
  3. Uncheck each tick under the Startup tab Windows will start without worrying.
  4. Reboot the computer. The message still appears?
  5. If Yes: restore the graduations.
     If not: restore the graduations selectively until you find the culprit, and then ask yourself how this program in your machine.

• Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Sign out of your account 'other '... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account "nine"... Reinstall

• The installation cannot continue because some of the processes are running.  Installation failed

  When you try to install Acrobat Professional 11 the following came the installation cannot continue because some of the processes are running.

  
  

  Installation failed

  
  

  Setup has encountered an error that caused the installation to fail.

  
  

  Contact the manufacturer of the software.

  If the processes are listed, turn them off prior to launch the installation.  Usually, these processes are something running in the background and may include virus protection.  Here are some links that can help fill the background programs:

  Programs interfere with the Installation of fence
  ----------------------------------------------

  Task Manager - PC: (CTRL-ALT-DEL)

  http://support.Microsoft.com/kb/323527

  Mac - Activity Monitor:

  http://osxdaily.com/2010/08/15/Mac-Task-Manager/

• The program Setup error: impossible to install a file that is necessary because the CAB file installation has a signature digital invalid

  Original title: Cabinet file configuration 11. cabin has an invalid digital signature.

  When you try to install a software program on my Windows 7 Netbook, a setup information panel said "a file that is required cannot be installed because the 11 cabin.» Configuration CAB file has an invalid digital signature. This may indicate that the file is corrupted. The program would not load. Is the problem with the software or the Windows 7 Netbook? If the Netbook is the problem, the defective CAB file can be deleted and replaced with a correct file? If so, how? Help, please. Thank you.

   
  Hello
   
  1 are. what program you trying to install it on Windows 7?
  2. is this program of Microsoft or non-Microsoft?
  3. are you able to install other programs?
   
  It is difficult to tell if the problem is with the software or Windows 7. We recommend that you provide us with more details, so that we can research and help you at best.
  See You can not install some programs or updates

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1327 on installation of c309g photosmart printer - "invalid drive c:\.

  Am running Windows XP SP3 and the printer is connected via a wired router

  Have recently changed my HARD drive and reinstalled windows etc., original HARD disk is functional but not connected

  Original letter from HARD drive is c: new HARD drive partitioned into I: J: & K:, with windows, etc. on K:

  After the installation of windows on the new drive, original HARD C:\ drive was briefly re-established as slave to recover the 'Favorites' folder and then broke

  When installing printer CD, all right until the error message "drive not valid error 1327 C:\ - go to the web support etc.»

  Printing software seems to completely uninstall and requires a re-boot, but there are still a lot of HP entries in the registry

  Went pages support web and found the error message that seemed to relate more to a mistake of the drive letter of the CD than the HARD drive but followed steps, copy the disc in the HARD drive, download the full drivers etc Web but every time got exactly the same message

  Final solution should contact the support technician to correct the registry entries, but this seems to cost £21 so eager to find a solution elsewhere

  Can someone please?

  Hello sidsilver

  The problem is that there is a problem with the the drive letters on your computer. Microsoft suggests that you change the system for anything other than C:\ drive because many Windows programs refer to specific drive letters. It is part of the reason that the system drive can not have his letter changed without reinstalling the operating system. Change, add, or remove a drive (windows.microsoft.com) Letter

  At this point, the best solution would be to re - install Windows on the computer and install it on the C:\ drive/partition.

  However, before you reinstall Windows try the following:

  1. Open the command prompt
  2. type: "subst C: K:\. "without the quotes and press to enter.
  3. Restart and try to reinstall again.

  OfficeJet Pro 8500 wireless Error Message Invalid drive F:.

• Certificate of default keychain is invalid

  Hello

  I put my UCS upgraded to version 2.0.3c, and everything works fine.

  But when I upgraded the first FI, I got this Major error:

  

  I dare not to upgrade the second FI, before correcting this error.

  I have seen that this certificate is linked to a connection between the browser Client and UCSM.

  I did not have any certificate when the UCS has been implemented (because there where some consultant who drew up the solution).

  What it takes, I do?

  / Stig sand

  Since you have not done something for the cert since its installation, all you need to do is regenerate default key ring.

  Refer to this document, under "Regenerating the keychain by default":

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/CLI/config/Guide/2.0/b_UCSM_CLI_Configuration_Guide_2_0_chapter_0110.PDF

  ARO

  Glenn B

• The objects will not matter because of invalid names

  I'm working with a new installation of Oracle, and BI.
  
  I work to fill the SPR using the administration tool and I'm trying to import metadata.
  
  I am able to select the Data Source, and then select the Types of metadata and then various databases and the list of tables in the data source view. When I select a table to import, you receive an error "some objects have not been imported due to invalid names:", then it displays the used tnsname description. There is no error code or number. This happens regardless of which table choose to import.
  
  What 'names' is he hesitated on?
  
  The only quirk I see is the HOST variable in the tnsname which is "R395 - 03.r395.local. Is this the problem or is it something else?

  Hello

  I ran into this issue today (11 G R2 64 bit Windows 2003) and I solved it by following the instructions in the post below to copy the tnsnames.ora file in my {BI home} \network\admin directory:

  Re: Unable to connect to the database of the OBIEE 11g improved SPR

  Note: Before running the error I had used the entire string in my tnsnames file for my name of data source (solution #2) when configuring the connection to the administration of BI tool referenced in the above thread. This allowed me to connect properly to my data source, but then I came across the 'names' invalid error when you try to import tables into my new storage space. Solution #1 in the thread above has solved the problem and I was able to import all of my tables in the repository without error. I suspect the "incorrect names" question has to do with the name of data source ("R395 - 03.r395.local') you used in the BI administration tool.

  For your convenience, the two solutions of the post above are referenced below:

  1. copy your tnsnames.ora {Oracle_BI1} \network\admin directory & {oracle_common} \network\admin directory (only the first is necessary because it is the ORACLE_HOME)

  2. or instead of the source tnsnames.ora entry, use the full expanded tnsnames as shown below

  (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 172.16.66.173)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl)))

  I hope this helps. .

  John

• Installation of Java 1324 error - invalid character

  It's SO frustrating. Every time I try to install Java, I always get the error message: "Error 1324. The AVG Plugins path contains an invalid character. »
  I remember a folder named 'AVG Plugins' but it is eliminated for some time now and it was located on an external hard drive. I have no idea why he decided to blame for its failure to install on a particular file. Well, I'm sure that the folder has had a registered symbol (®) in its folder I can see where its getting the part "invalid character" of... Before it was deleted, the Plugins of AVG file contained Java installation files, but I deleted them eventually if I could reinstall it on my hard drive. I remember at one point, Java was working fine once again, but after some problems with MP3 Rocket (which depends on Java), I deleted Java and once again tried to reinstall... Which doesn't of course.

  At first I thought that I would just change the destination folder but I tried to save now on many places, but I always get the same exact error message, with the same exact file mentioned (AVG plugins). I tried to install Java the way normal and in one end offline installation, I get finally to the same error message. Can someone help me please?

  Here is part of an old MSINFO report (at the time when Java was installed in AVG Plugins). You can see that Java appears several times in the folder "Plugins AVG", which may have something to do with this current error message... Also, some Java files see the place in my control panel, but I'm unable to uninstall the. Let me know if this is something that I need to study in detail in order to solve this problem...

  [Environment variables]
   
  CLASSPATH. ; J:\AVG Plugins\Java\lib\ext\QTJava.zip   
  QTJAVA J:\AVG Plugins\Java\lib\ext\QTJava.zip

  [Windows error reporting]

  11/03/2011 06:00 application error Faulting application javaw.exe, version 6.0.10.6, time stamp 0x45f7b2e0, failed module Flash10a.ocx, version 10.0.12.36, time stamp 0x48e83175, exception code 0xc0000005, offset 0x000c97a0, process id 0 x 1330 error, start time of application 0x01cbdfa43562f760.
  08/07/2011 16:58 application error Faulting application javaw.exe, version 6.0.240.7, time stamp 0x4d4a0b98, failed module Flash10a.ocx, version 10.0.12.36, time stamp 0x48e83175, exception 0xc0000005, offset error 0x000c97a0, process 0xddc id code, start time of application 0x01cc3d8fe8690aa2.
  SID 2349 = & iBucketTable = 1 & iBucket = 1073051697
  Cabin ID: 0

  Signature of the problem:
  P1: javaw.exe
  P2: 6.0.10.6
  P3: 45f7b2e0
  P4: Flash10a.ocx
  P5: 10.0.12.36
  P6: 48e83175
  P7: c0000005
  P8: 000c97a0
  P9:
  P10:

  Attached files:
  C:\Users\Allen\AppData\Local\Temp\WER36D8.tmp.version.txt

  These files are available here:
  C:\Users\Allen\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report12d952a1
  04/04/2011 bucket 1729795195, type 5 05:01 Windows Error Reporting failure
  Event name: AppHangB1
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1: javaw.exe
  P2: 6.0.240.7
  P3: 4d4a0b98
  P4: 6efb
  P5: 6144
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Users\Allen\AppData\Local\Temp\WER26DB.tmp.AppCompat.txt

  These files are available here:
  C:\Users\Allen\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report12593dc4
  08/07/2011 type 1729795195, bucket Windows Error Reporting lack of 01:37 5
  Event name: AppHangB1
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1: javaw.exe
  P2: 6.0.240.7
  P3: 4d4a0b98
  P4: 6efb
  P5: 6144
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:
     
  08/07/2011 17:00 Windows Error Reporting crash bucket 2319574050, type 1
  Event name: APPCRASH
  Answer: http://oca.microsoft.com/resredir.aspx?SID=2349&iBucketTable=1&iBucket=-1975393246
  Cabin ID: 0

  Signature of the problem:
  P1: javaw.exe
  P2: 6.0.240.7
  P3: 4d4a0b98
  P4: Flash10a.ocx
  P5: 10.0.12.36
  P6: 48e83175
  P7: c0000005
  P8: 000c97a0
  P9:
  P10:

  Attached files:
  C:\Users\Allen\AppData\Local\Temp\WERD858.tmp.version.txt

  These files are available here:
  C:\Users\Allen\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report0d6172e2
  04/04/2011 05:01 application Hang the javaw.exe version 6.0.240.7 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the reports on the problems and Solutions control panel. Process ID: 8Ce Start Time: time of termination 01cbf27550cd99c9: 36

  Hello

  Method 1:
  You can disable the anti-virus installed on the computer and then try to install java and check:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  You can also try the steps in knowledge base article and check the:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

  Method 3:
  You can also check the link provided and check:
  How to get Java software installation log files?
  http://Java.com/en/download/help/Log_files.XML

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com